Instruction/ maintenance manual of the product LCD22-921 Technika
Go to page of 51
COLOUR TELEVISION WITH REMOTE CONTROL OPERA TING INSTRUCTIONS For assistance, please call our T esco Electrical Helpline on 0845 4566767 LCD22-921.
English - 1 - Contents Features ................................................................. 2 Accessories ............................................................ 2 Introduction ............................................................. 2 Preparation .
English - 2 - Features • Remote controlled colour LCD TV . • Fully integrated digital TV (DVB-T). • HDMI connectors for digital video and audio. This connection is also designed to accept high de fi nition signals. • USB input. • 200 programmes from VHF , UHF(analogue).
English - 3 - Safety Precautions Please read the following recommended safety precautions carefully for your safety . Power Source The TV set should be operated only from a 220-240 V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience.
English - 4 - Disconnecting the Device The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable. Headphone V olume Excessive sound pressure from earphones and headphones can cause hearing loss.
English - 5 - Overview of the Remote Control MENU / INFO EPG FAV PRESETS SUBTITLE RETURN 28 29 SOURCE SLEEP SCREEN LANG. Standby 1. Image size 2. Sleep timer 3. Numeric buttons 4. Return / TXT Index 5. Cursor up / TXT up page 6. Cursor left 7. Programme up 8.
English - 6 - LCD TV and Operating Buttons Power On/Off Switch 1. TV/A V button 2. Programme Up/Down buttons 3. V olume Up/Down buttons 4. Note: Press “ ” / “ ” buttons at the same time to view main menu. Viewing the Connections- Back Connectors SCART socket 1.
English - 7 - Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device to enable component audio. S/PDIF Out 4. outputs digital audio signals of the currently watched source. Use an S/PDIF coaxial cable to transfer audio signals to a device that has S/PDIF input.
English - 8 - Power Connection IMPORT ANT : The TV set is designed to operate on 220-240V AC, 50 Hz. • After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. • Plug the power cable to the mains socket outlet.
English - 9 - Connecting the LCD TV to a PC For displaying your computer ’s screen image on your LCD TV , you can connect your computer to the TV set. • Power off both computer and display before making any connections. • Use 15-pin D-sub display cable to connect a PC to the LCD TV .
English - 10 - Using Side A V Connectors Y ou can connect a range of optional equipment to your LCD TV . Possible connections are shown below . Note that cables shown in the illustration are not supplied. • For connecting a camcorder , connect to the VIDEO IN socket and the AUDIO SOCKETS.
English - 1 1 - Switching the TV On/Off T o Switch the TV On • Connect the power cord to the 220-240V AC, 50 Hz. Then the standby LED lights up. • T o switch on the TV from standby mode either: • Press the “ ” button, P+ / P- or a numeric button on the remote control.
English - 12 - Initial Settings When the TV set is operated for the fi rst time, the Digital TV turns on fi rst. Because this is the fi rst time the TV is used, there are no channels stored in the memory . When the TV is turned on for the fi rst time, the menu for the language selection appears on the screen.
English - 13 - General Operation Press the SOURCE button on the remote control and select DTV/USB to switch the TV set to digital terrestrial television broadcasting.
English - 14 - The operation method may differ depending on the contents of the digital teletext. Follow the instructions displayed on digital teletext screen. • When Press “ SELECT ” button or similar message appears on the screen, press the OK button.
English - 15 - Note : If you enter the same programme number of the channel that you want to move, “.... channel services will be replaced. Do you want to continue?” OSD will be displayed.
English - 16 - How to Add a Channel to a Favourites List • By pressing “ ” or “ ” buttons, highlight the channel that you want to add to the favourite list. • By pressing OK button, the highlighted channel is added to the Favourite List. • F icon indicates that a channel is added to Favourite List.
English - 17 - • Some CAMs may require the following set up. Please set the CAM by entering the Digital TV menu, Conditional Access then pressing the OK button.
English - 18 - channels will not be located while in automatic search or manual search. Use “ ” or “ ” button to select Scan Encrypted and then press “ ” or “ ” button to set this setting as On or Off. Receiver Upgrade Over Air Download (OAD) T o ensure that your TV always has the most update information, use this setting.
English - 19 - When AUTO is selected, Current Time and T ime Zone options will not be available to be set. If MANUAL option is selected as the T ime Zone Setting, T ime Zone can be altered: • By pressing “ ” or “ ” buttons select T ime Zone.
English - 20 - Use “ ” or “ ” buttons to highlight the menu item that will be adjusted and then press “ ” or “ ” button to set. Notes: • System Language determines the on-screen menu language. • Audio Language is used for selecting the soundtrack of a channels.
English - 21 - you will be asked whether or not to delete the settings. Selecting “Y es” by pressing OK button while the “Y es” is highlighted will delete the existing channel table.
English - 22 - Press “ ” or “ ” button to select Film Mode . Press “ ” or “ ” button to set this feature On or Off. T urn this feature on when you are watching. fi lms to see the fast motion scenes clearly . Game Mode (optional) Select Game Mode by pressing “ ” or “ ” button.
English - 23 - AV L Automatic V olume Limiting (A VL) function adjusts the sound to obtain fi xed output level between programmes (For instance, volume level of advertisements tend to be louder than programmes). Press “ ” or “ ” button to select AV L .
English - 24 - HDMI PC Full Mode (optional) If you want to view PC screen in HDMI mode by using external connection, HDMI PC FULL MODE option should be On to adjust the screen ratio correctly .
English - 25 - By moving the cursor in four directions you can reach 20 programmes in the same page. Y ou can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except for the A V modes). By cursor action, programme selection is done automatically .
English - 26 - Autoposition If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically . This setting therefore automatically optimizes the display . Select Autoposition item by using “ ” or “ ” buttons.
English - 27 - 4:3 Use to view a normal picture (4:3 aspect ratio) as this is its original size. Panoramic This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fi ll the screen, without making the picture appear unnatural.
English - 28 - Tips Screen Care Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. For your safety , unplug the mains plug when cleaning the set. When moving the TV , hold it properly from the bottom part.
English - 29 - Appendix A: PC Input T ypical Display Modes The display has a maximum resolution of 1600 X 1200 . The following table is an illustration of some of the typical video display modes. Y our TV may not support different resolutions. Supported resolution modes are listed below .
English - 30 - Speci fi cations TV BROADCASTING P AL/SECAM B/G D/K K’ I/I’ L/L ’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND Digital Reception MHEG-5 ENGINE compliant with ISO/IE.
English - 31 - Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply .
English - 32 - Contents Features ............................................................... 33 •General Properties .......................................... 33 About this Manual ............................................. 33 Safety Information .
English - 33 - Features • General Properties • DVD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG. • USB & MC inputs. • NTSC/P AL playback (according to disc content) • User-friendly multilanguage OSD menu control. • , LPCM audio via coaxial and optical digital audio outputs.
English - 34 - How to W atch a DVD When placing a disc into the loader , labeled side of the disc should be on the front: When TV set is turned on, fi rst switch to DVD source by using the SOURCE button on the remote control. Press play on the remote control, or directly press play button at the front panel.
English - 35 - Using Digital Multimedia Connectors • Use SW AP button on the remote control to switch between USB and memory card. • Y ou can connect USB/MC devices to your TV by using USB or MC input of the TV . This feature allows you to display/play fi les stored on a USB device or a MC card.
English - 36 - Overview of the Remote Control MENU / INFO EPG FAV PRESETS SUBTITLE RETURN SOURCE SLEEP SCREEN 6 37 38 39 40 41 42 43 LANG. Standby 1. Image size 2. Sleep timer 3. Numeric buttons 4. Return 5. Cursor up 6. Cursor left 7. Programme up 8.
English - 37 - USB & MC Modes Playback Switch to DVD source by using the SOURCE or PLA Y button on the remote control. Y ou can connect both USB and MC sources to your TV at the same time. Press SW AP button on the remote control to list, available inputs are listed on a menu screen.
English - 38 - Stopping Play Press stop ( ) twice (only for videos). T o stop the play permanently , press STOP ( ) twice. When the STOP( ) button is pressed for the fi rst time, a message “PRESS PLA Y KEY TO CONTINUE” will appear on the screen to remind you if you want to continue the play .
English - 39 - title, the search box disappears and “ Input Invalid” message is displayed on screen. • If you wait fi ve seconds without pressing any key for selecting scenes by chapter number , the operation is cancelled. • Y ou can press RETURN key to cancel title search.
English - 40 - 2X” is displayed on the screen and the picture is now larger . By pressing ZOOM key consecutively you can reach “ 3X”, “ 4X, 1/2x, 1/3x 1/4x” modes. NOTE: Y ou can move in the picture, i.e. change the zoomed location, by using the “ ” (Left) or “ ” (Right) / “ ” (Down) / “ ” (Up) arrow keys.
English - 41 - Using a DVD Menu Some DVD discs have unique menu structures called DVD menus. For example, DVDs programmed with complex contents provide guide menus, and those recorded with various languages provide menus for audio and subtitle language.
English - 42 - Press ( ) on the remote control. Y ou can increase or decrease the speed of the slow-motion play by pressing SEARCH/SLOW ( (or) ). There are 4 slow motion modes as 1/16, 1/8, 1/4, 1/2. The speed of slow motion play is displayed on the screen each time you change it.
English - 43 - Audio CD T rack: Elapsed or Remaining T ime can be displayed using DISPLA Y key and can be changed using INFO key . P AUSE Press P AUSE ( ) once during play . The play freezes. P AUSE message appears on screen. T o return to normal play press PLA Y ( ) again.
English - 44 - Setup Menu Press DISPLA Y key on the remote control when the player is not in playback mode. The setup menu-main page appears. T o close the setup menu, press DISPLA Y key . MAIN P AGE In the main page, the fi rst page is selected by default.
English - 45 - STEREO: T wo channels stereo. P ARENT AL (Parental Level) Playing some DVDs can be limited depending on the age of users. The “Parental Control” function allows playback limitation level to be set by the parent. Parental Level can be adjusted to one of the eight levels.
English - 46 - If nothing works If you have tried the above solutions and none seem to work, try switching your TV -DVD off and on again. If this does not work, contact your supplier or TV -DVD repair technician. Never attempt to repair a defective TV -DVD yourself.
English - 47 - Supported File Formats for USB & MC Modes Media File Extension Format Remarks Video Audio (Maximum resolution/Bit rate etc.) Movie .mpg/ .dat/ .vob MPEG1 MPEG Layer 1/2/3 MPEG2 MPEG2 MPEG4 PCM/MP3 .avi MS ISO MPEG4 PCM/MP3 Support SP and ASP Music - - PCM Sample Rate: 8K ~ 48KHz .
English - 48 - DI G I TAL A UD I O DVD AU DI O- CD A udi o + Vi d e o 12 cm A udi o 8c m 12 cm 8c m A udi o (x x x x .m p 3 ) MP 3 - C D JPE G RE ADAB LE PI CT U R E- C D Vi d e o ( st i l l pi ct ure.
English - 49 - Speci fi cations DVD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG T ypes of Discs Supported DVD : SS/SL 4.7” (DVD-5) SS/DL 4.7” (DVD-9) DS/SL 4.
50157421.
An important point after buying a device Technika LCD22-921 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Technika LCD22-921 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Technika LCD22-921 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Technika LCD22-921 you will learn all the available features of the product, as well as information on its operation. The information that you get Technika LCD22-921 will certainly help you make a decision on the purchase.
If you already are a holder of Technika LCD22-921, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Technika LCD22-921.
However, one of the most important roles played by the user manual is to help in solving problems with Technika LCD22-921. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Technika LCD22-921 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
