Instruction/ maintenance manual of the product B150 Baumatic
Go to page of 28
1 B150 60 cm Fan oven.
ELECTRIC SINGLE 60cm OVENS USER AND INSTALLATION INSTRUCTIONS.
1 For future reference please record the f ollowing information which be found on the Rating Plate and the date of purchase which can be found in the invoice: Model Number ……………………. Serial Number ……………………. Date of Purchase …………………….
2 CONTENTS General Information page 3-4 Warning and Safety Instructions page 5-6 Instructions for Use pages 7-14 Instructions for Installation pages 15-21 Technical Data page 22 Conditions of Guarante.
3 GENERAL INFORMATION Please read this booklet thoroughly before you use this appliance. It is important that you understa nd all the control functions before commencing to cook with your Baumatic appliance. Please remember the advice and warnings shown on page 4 which is headed ‘IMPORTANT – Warning and Safety Instructions’.
4 The Warranty applies to Great Britain and Northern Ireland only. In the event that you require an y After Sales Service or advice, please contact the Baumatic Service Department on telephone number – 0118 933 69 11. Before using this appliance ensure that any protective packaging or coatings have been removed.
5 IMPORTANT NOTE – WARNING and SAFETY INSTRUCTIONS This appliance complies with all current European safety legislation, however Baumatic do wish to emphasise that compliance does not remove the fact that the appliance surfaces will become hot during use and retain heat after operation.
6 NOTE: This appliance must be correctly installed by a suitably qualified person, strictly in accordance with the manufacturer’s instructions. For electrical installations, NICEIC registration is recommended.
7 INSTRUCTIONS FOR USE These User Instructions should be re tained for future reference and for use by a person who is perhaps unfamiliar with the appliance.
8 LOWER ELEMENT MODE (AS2, AS11). This is for slow cooking or for warming up meals. FAN OVEN MODE (all models ). This provides even heating with the fan and allows different dishes to be cooked on different levels at the same time. FAN ASSIST MODE 1 (B200, B205, B495, B497, B550, AS8).
9 WARNING • Keep the oven door closed when using the GRILL. • Do not use aluminium foil to cover the grill pan or heat items wrapped in aluminium foil under the grill – the high reflectivity of the foil can damage the grill element. HELPFUL HINTS • Before cooking, check that any unused accessories are removed from the oven.
10 USING THE 6 BUTTON ELE CTRONIC TIMER ( AS2 , AS8, AS11, B180, B187, B200, B205, B495, B497, B550) Description of button functions: 1. Minute Minder 2. Cooking on auto-function (duration) 3. End of cooking tim e (end time) 4. Manual operation 5. Reducing numbers in all programs 6.
11 2) COOKING DURATION MODE: Set the oven to the required temperature and briefly press the ‘duration’ button (2). Set the required cooking duration time using the + or – buttons. The ‘pot’ symbol will remain illum inated and ‘AUTO’ will appear in the display.
12 5) MINUTE MINDER MODE: Briefly press the ‘Minute Minder’ button (1). Set the required time by pressing the + or – buttons. The ‘bell’ symbol will appear in the display.
13 USING THE min TIMER (B150) This run-back timer can be used independently of an oven cooking cycle for up to 60 minutes of timing. 1) To set the timer, turn the knob fully clockwise until it stops and then back to the required time.
14 VITREOUS ENAMEL PARTS Use only a cleaner that is recommended for this type of material – avoid chloride-based products such as bleach. DOOR GLASS Do not use any abrasive medium that could cause damage. Remember that if the surface of the glass panel becomes scratch ed, this could lead to a dangerous failure.
15 INSTRUCTIONS FOR INSTALLATION This appliance must be installed by a competent person, in accordance with the current ve rsion of the following UK Regulations and Safety Standards or their European .
16 INSTALLATION NOTES 1. Ensure that the aperture for ove n installation is the correct size as per Fig. 2 at page 22. 2. Ensure that the rear panel of the furniture housing has been removed. 3. All ovens with which this instru ction book is provide d may be installed without the need for any additional ventilation cut- outs.
17 Fig.2 Installation distances fo r 60cm wide single electric ovens (shape of top casing may vary) Fig.3: Ventilation and cut-out requireme nts for installation of a single electric oven into a standard kitchen unit.
18 Fig.4: Ventilation and cut-out requireme nts for installation of a single electric oven into a tall housing unit..
19 ELECTRICAL CONNECTION Before connecting the appliance, make sure the su pply voltage marked on the Rating Plate co rresponds with the mains supply voltage.
20 REPLACING THE MAINS LEAD In the event it is necessary to replace the mains supply lead, proceed as follows: 1. Disconnect the appliance from the supply, undo the fixing screws and remove the back panel. 2. Undo the clamp screws and terminal screws to release the existing lead.
21 REPLACING THE OVEN LIGHT (Not covered by the appliance warranty) Disconnect the appliance from the electricity supply, remove the oven door (as described previously) as well as the oven shelves. Remove the protective glass light-cover by twisting anti- clockwise.
22 TECHNICAL DATA DIMENSIONS Height: 595mm Width: 596mm (at front) Depth: 524mm (excluding handles ) COOLING FAN A tangential cooling fan is fitted on the following models: AS2, AS8, AS11, B180 (Stain.
Baumatic Ltd. Conditions of guarantee Dear Customer, Your new Ba umatic appl iance com es complete wit h a free 12 m onth gua rantee coveri ng both part s and labour costs resulting from defective materials or workmanship.
Headquarters Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX, United Kingdom Sales Telephone +44 118 933 6900 Sales Fax +44 118 931 0035 Service Telephone +44 118 933 6911 Service Fax +44 118 986 9124 Spares Telephone +44 118 933 6922 Technical / Advice Telephone +44 118 933 6933 E-mail : sales@baumatic.
Environmental note o The packaging materials that Baum atic uses are environmentally friendly and can be recycled. o Please discard all packaging mate rial with due regard for the environment.
2 2.
An important point after buying a device Baumatic B150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Baumatic B150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Baumatic B150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Baumatic B150 you will learn all the available features of the product, as well as information on its operation. The information that you get Baumatic B150 will certainly help you make a decision on the purchase.
If you already are a holder of Baumatic B150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Baumatic B150.
However, one of the most important roles played by the user manual is to help in solving problems with Baumatic B150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Baumatic B150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
