Instruction/ maintenance manual of the product RC-828 Tascam
Go to page of 7
Section 1 – Starting to use the RC-828 0.98 – 1 1 – Star ting to use the RC-828 The T ASCAM RC-828 Remote Control Unit allo ws you to control up to 4 DTRS 1 recorders (any combination of D A-98, D A-38 or D A-98 units) from one location.
Section 2 – Parts of the RC-828 2 – 0.98 1.1.2 Chase mode In an all-audio setup, the first unit is unlikely to be chasing external sources. Ho wev er , subsequent units in the chain should no w chase this master , using the DTRS (ABS) sync method, when their CHASE switches are pressed.
Section 2 – Parts of the RC-828 0.98 – 3 is of f and use the INPUT MONITOR ke ys on the D A-98 to turn off input monitoring on all tracks. [6] JOG/SHTL MON key and indicator This ke y allo ws the .
Section 3 – Monitoring modes 4 – 0.98 POINT ke y will go out. Pressing and holding the ERASE ke y while pressing a LOCA TE POINT ke y where no location point is stored (the indica- tor is unlit) will hav e no effect. T o erase all location point memories, press and hold do wn the ERASE ke y , and press the CAPTURE key .
Specifications 4 – Specifications Maximum number of DTRS units that may be controlled simulta- neously 4 REC FUNCTION controls for individual track arming 32 tracks Location memories 12 location memories (11 and 12 may be used as repeat points) Shuttle speeds (forward and rev erse) x 8, 4, 2, 1, 1/2, 1/4 normal speed a a.
Monitoring flowchart Monitoring flowc har t Note: • “Y” = [on/yes] • “N” = [of f/no] ALL INPUT ? REC FUNCTION ? STOP FF, REW ? JOG/ SHUTTLE ? JOG/ SHUTTLE ? AUTO MON ? SHTL MON ? SHTL MON.
Monitoring tables Monitoring tables D A-88 and D A-38 PLA Y REC ST OP , FF . REW JOG/ SHUTTLE ALL INPUT on Source ALL INPUT off A UTO MON off REC FUNCTION on REC FUNCTION off T ape T ape Mute T ape A .
An important point after buying a device Tascam RC-828 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tascam RC-828 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tascam RC-828 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tascam RC-828 you will learn all the available features of the product, as well as information on its operation. The information that you get Tascam RC-828 will certainly help you make a decision on the purchase.
If you already are a holder of Tascam RC-828, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tascam RC-828.
However, one of the most important roles played by the user manual is to help in solving problems with Tascam RC-828. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tascam RC-828 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
