Instruction/ maintenance manual of the product MMP-16 Tascam
Go to page of 6
TASCAM TEAC Professional Division D00000000A MMR-8 Modular Multitrack Recorder MMP-16 Modular Multitrack Player MMR-8/MMP-16 SCSI Tips for MMR/MMP Users.
SCSI Tips for MMR/MMP Users rev 1.0 1/26/99 2 SCSI Tips for MMR/MMP Users Table of Contents SCSI C ABLES ....................................................................................................................................... 3 Cable Quality .
SCSI Tips for MMR/MMP Users rev 1.0 1/26/99 3 SCSI Tips for MMR/MMP Users We have found that the quality of materials and attention to detail in setting up external SCSI devices for use with the MMR/MMP system can have a profound effect on the reliability and performance of the system.
SCSI Tips for MMR/MMP Users rev 1.0 1/26/99 4 SCSI Termination A terminator provides electrical circuitry at the end of a SCSI chain to prevent the reflection of electrical signals when they reach the end of the chain. The SCSI bus requires terminations only at the ends of the SCSI chain, not in the middle.
SCSI Tips for MMR/MMP Users rev 1.0 1/26/99 5 Wide SCSI Cards and Kingston Frames The MMR/MMP are normally shipped with a narrow Symbios SCSI card. The MMR/MMP units also support the Symbios SYM8751SP Wide SCSI card.
SCSI Tips for MMR/MMP Users rev 1.0 1/26/99 6 Certified Drives The following disk drives have been approved for use with the MMR/MMP: Drive Manufacturer Model Firmware Version IBM DCHS09F 2222 Nikon* .
An important point after buying a device Tascam MMP-16 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tascam MMP-16 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tascam MMP-16 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tascam MMP-16 you will learn all the available features of the product, as well as information on its operation. The information that you get Tascam MMP-16 will certainly help you make a decision on the purchase.
If you already are a holder of Tascam MMP-16, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tascam MMP-16.
However, one of the most important roles played by the user manual is to help in solving problems with Tascam MMP-16. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tascam MMP-16 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
