Instruction/ maintenance manual of the product VNET12HP Tannoy
Go to page of 18
Owners Manual VNET 12, VNET 12 HP, VNET 15, VNET 300 VNET 15 HL, VNET 15BP & VNET 18DR TM 6481 0470 Tannoy adopts a policy of continuous improvement and product specification is subject to change. Tannoy United Kingdom T: +44 (0) 1236 420199 F: +44 (0) 1236 428230 E: enquiries@tannoy.
TM 2 3 1.0: IMPORTANT SAFETY INSTRUCTIONS 2.0: INTRODUCTION 3.0: THE BASICS 3.1 Unpacking and visual checks 3.2 Preliminary recommendation 4.0: INTERF ACE P ANEL 5.0: OPERATION 5.1: AC power requirements 5.2 Cooling 5.3 LED functions 5.4 Limiters 5.5 Audio Connections 5.
4 5 2.0: INTRODUCTION The T annoy VNET12HP & VNET15 loudspeakers utilise high performance Dual Concentric™ drive units – the 12” (300mm) PowerDual™ and the 15” (380mm) PowerDual™.
CM I N T E R T E K L I S T E D C US THIS CLASS D DIGITAL DEVICE MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS AND COMPLIES WITH PART 15 OF THE FCC RULES.
6.0: NETWORK CONNECTIONS Interconnection between the network computer and the speakers is very straight forward, using twisted pair cable and simple connectors. The RS485 interface operates on a shared bus so that a single computer can control any amplifier on the bus, and the computer may gather status information from any device on the bus.
7.0 SOFTW ARE INST ALLA TION Y ou can check to see if you already have the .NET Framework 1.1 installed by clicking Start on your Windows desktop, selecting Control Panel , and then double-clicking the Add or Remove Programs icon. When that window appears, scroll through the list of applications.
8.0 SOFTW ARE OPERA TION 12 13 TM Menus The menu system is arranged like so: File Open opens a file which contains parameters for the device Save saves the current settings in the current file name Sa.
SPEAKER PROPERTIES At the top of the panel there are several pieces of information about the connected device (which are only activated when going On-line to a device): Model Name The VNET™ model number Loudspeaker name T o uniquely identify the speaker (i.
7.0 SOFTW ARE OPERA TION Smooth adjustment Whenever a parameter is changed, VNET™ will assess the likely impact on the signal path, and will intelligently smoothly ramp to the new value, or mute for a short time if the change could otherwise cause any undesirable sound to be reproduced.
18 19 TM 8.1: UPDA TING FIRMW ARE 8. At the bottom right hand side of the screen a blue bar will show the progress of the firmware update. 9. After the download is complete the following message appears. The DSP is updating at this point. Do not power down the unit or disconnect any network cable at this point.
20 2 1 TM 1 1.0 DIMENSIONS 1 1.0 DIMENSIONS 555.0 290.0 43.0 667.0 710. 652.4 290.0 43.0 609.4 THIS EQUIPMENT MUST BE EARTHED LINK NETWORK IN NETWORK LINK INPUT ON - OFF USER DSP T10AL 250V POWER FUSE - POWER - SIGNAL - LIMIT MANUFACTURED IN THE UNITED KINGDOM CAUTION OUVRIR.
2 2 TM 12.0 PERFORMANCE DA T A 13.0: TECHNICAL SPECIFICA TIONS SYSTEM V NET 12 V NET 12HP V NET 15 V NET 300 System Type Full Range - V ented Full Range - V ented Full Range - V ented Full Range – V.
24 TM SYSTEM V NET 15BP V NET 15HL V NET 18DR System Type Subwoofer - Band Pass Full Range – Horn Loaded Full Range – Direct Radiating Frequency Response (1) +/- 3dB 35Hz - 150Hz 48Hz - 250Hz 27Hz.
26 27 TM Use the table of parts along with the assembly drawing (Figure 3.) to assemble the VMY . Figure 4 shows the VMY assembled. Fig.1 Fig.2 Number on Assembly View (Fig 3.
28 29 TM 14.3 : SECUR ET - VMB W ALL MOUNTING BRACKET FIG 1. The VMB is wall mounting bracket for the attachment of a VMY , available in both black and white finishes, allowing the user secure the T annoy VNET™ Full range loudspeaker in either portrait or landscape orientations to a wall.
30 31 TM 14.5 : SECUR ET - VTH POLE MOUNT The T annoy VNET™ loudspeakers are fitted as standard with a blanking plate on the base of the cabinet. However , should you ever wish to mount the VNET™ onto a standard 35mm pole mount this blanking plate can be quickly and easily removed and replaced by a VTH pole mount.
16.0: W ARRANTY No maintenance of the VNET™ loudspeakers is necessary. All T annoy professional loudspeaker products are covered by a 5 year warranty from the date of manufacture (1 year for electronics), subject to the absence of misuse, overload or accidental damage.
TM NOTES NOTES.
An important point after buying a device Tannoy VNET12HP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tannoy VNET12HP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tannoy VNET12HP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tannoy VNET12HP you will learn all the available features of the product, as well as information on its operation. The information that you get Tannoy VNET12HP will certainly help you make a decision on the purchase.
If you already are a holder of Tannoy VNET12HP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tannoy VNET12HP.
However, one of the most important roles played by the user manual is to help in solving problems with Tannoy VNET12HP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tannoy VNET12HP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
