Instruction/ maintenance manual of the product TCP-381 Tanaka
Go to page of 10
Owner’ Owner’ Owner’ Owner’ Owner’ s Man s Man s Man s Man s Man ual ual ual ual ual Model Numbers: T T T T T CP-25, T CP-25, T CP-25, T CP-25, T CP-25, T CP-210 CP-210 CP-210 CP-210 CP-210 .
www.tanakapowerequipment.com 1 custsvc@tanaka-ism.com Owner’s Manual TCP-25/210/381 Before using this unit: • Read the operator’s manual carefully. • Check that the cutting equipment is correctly assembled and adjusted. • Start the unit and check the carburetor adjustment.
www.tanakapowerequipment.com 2 custsvc@tanaka-ism.com Owner’s Manual TCP-25/210/381 1. What is What? Since this manual covers several models, there may be some difference between pictures and your unit. Use the instructions that apply to your unit. 1.
www.tanakapowerequipment.com 3 custsvc@tanaka-ism.com Owner’s Manual TCP-25/210/381 2. Warnings and Safety Instructions. Before operation • Protection is required for head, eyes, ears, hands and feet. Wear a suitable hard hat, goggles, ear covers, heavy gloves and safety shoes.
www.tanakapowerequipment.com 4 custsvc@tanaka-ism.com Owner’s Manual TCP-25/210/381 Hose to pump connection. (Fig. 1-1) Care must be taken to ensure that tight connection is made between the female unions, and the male pump stubs. NOTE! An air leak at either union will greatly reduce the pump efficiency or no water is pumped at all.
www.tanakapowerequipment.com 5 custsvc@tanaka-ism.com Owner’s Manual TCP-25/210/381 Priming (Fig. 2-2) It is necessary to prime the pump befo re the initial usage. This is done by filling the pump body with water via the priming plug on the top of the pump housing.
www.tanakapowerequipment.com 6 custsvc@tanaka-ism.com Owner’s Manual TCP-25/210/381 5. Maintenance. Water pump (Fig. 3-1) All water in the pump should be drained from the housing, by means of the drain plug. Water left in the pump ho using may cause damage by corrosion; there is also the danger of *freeze-up" damage in cold weather.
www.tanakapowerequipment.com 7 custsvc@tanaka-ism.com Owner’s Manual TCP-25/210/381 Maintenance schedule Below you will find some general maintenance instructions. For further information please contact your service dealer. Daily maintenance • Clean the exterior of the pump.
www.tanakapowerequipment.com 8 custsvc@tanaka-ism.com Owner’s Manual TCP-25/210/381 6. Technical Data NOTE : Equivalent noise level/vibration level are calculated as the time-weighted energy total for noise/vibration levels under various working cond itions with the following time distribution : ½ idle, ½ full speed.
www.tanakapowerequipment.com 9 custsvc@tanaka-ism.com Owner’s Manual TCP-25/210/381 Declaration of conformity We, Tanaka Kogyo Co.,Ltd.,3-4-29 Tsudanuma,Narashino,Chiba,Japan Declare under our sole .
An important point after buying a device Tanaka TCP-381 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tanaka TCP-381 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tanaka TCP-381 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tanaka TCP-381 you will learn all the available features of the product, as well as information on its operation. The information that you get Tanaka TCP-381 will certainly help you make a decision on the purchase.
If you already are a holder of Tanaka TCP-381, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tanaka TCP-381.
However, one of the most important roles played by the user manual is to help in solving problems with Tanaka TCP-381. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tanaka TCP-381 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
