Instruction/ maintenance manual of the product UAPPRO Syscom
Go to page of 28
Enterprise WiFi System.
.
1 Introduction Introduction Thank you f or purchasing the Ubiquiti UniF i Enterprise WiF i System. The UniF i Enterprise WiF i S ystem includes the UniF i Controller software that allows y ou to manage your wireless network using your W eb br owser . This Quick Start Guide is for use with the UniFi AP-P ro.
2 UniFi ™ AP Pro System Requirements • Microsoft Windows XP , Windows Vista, Windows 7, or Mac OS X • Jav a Runtime Environment 1.6 (or abo ve) • W eb Browser : Mo zilla Fir efox, Goo.
3 Network T opology Requirements Hardware Overview LED LED Color Status Flashing White Initializing. Steady White F actor y default, waiting to be int egrated . Alternating White/Blue Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is taking place.
4 UniFi ™ AP Pro P or ts Main Ethernet Port (10/100/1000 Mbps) Secondary Ethernet Port (10/100/1000 Mbps) Reset Button Main/48V The Main/48V Ethernet P or t is used to connect the power and should be connected to the LAN and DHCP server . Po wer can be provided by a 48V 802.
5 Network T opology Requirements Hardware Installation The UniF i AP-Pro can be mounted to the wall or ceiling . Perform the steps for the appropriat e installation: W all M ount 1. Position the Mounting Br acket at the desired location on the wall with the cable feed slot pointed t owards the floor .
6 UniFi ™ AP Pro 5. Connect the Ethernet cable to the Main Ethernet P ort on the UniFi AP-P ro. 6. Align the notch on the UniF i AP-Pro with the notch on the Mounting Brack et.
7 Network T opology Requirements 7. T urn the UniFi AP-P ro clockwise until it locks into place. Ceiling Mount 1. Remove the ceiling tile . 2. Place the Mounting Brack et in the center of the ceiling tile. Mark the three mounting screw holes and 25 mm hole for the Ethernet cable.
8 UniFi ™ AP Pro 3. Use a 3 mm drill bit to drill the screw holes and cut or drill the 25 mm hole for the Ethernet cable f eed. 4. Secure the Mounting Brack et to the ceiling tile using the Ceiling Backing Plate , M3x50 Flathead Screws and M3 Keps Nuts with T ooth W ashers.
9 Network T opology Requirements 6. Connect the Ethernet cable to the Main Ethernet P ort . 7. Align the notch on the UniF i AP-Pro with the notch on the Mounting Brack et.
10 UniFi ™ AP Pro P owering the UniF i AP-Pr o The UniF i AP Pro can be powered directly by an 802.af compliant switch or with the included PoE GigE A dapter . Connect to an 802.3af Compliant S witch Connect the other end of the Ethernet cable coming from the Main Ethernet Port of the UniFi AP-P ro directly to a PoE port on an 802.
11 Po wering the UniF i AP-Pro 2. Connect an Ethernet cable from your LAN to the E thernet port labeled LAN on the PoE GigE Adapter . 3. Connect the power cord t o the power por t on the P oE GigE Adapter . Connect the other end to of the power cord to a power outlet.
12 UniFi ™ AP Pro Software Installation Insert the UniFi Controller software CD into y our CD-ROM drive and follow the instructions for y our specific computer type. Mac Users 1. Click the Install icon. 2. Click Con tinue and follow the on-screen instructions to install the software.
13 Software Installation 3. Go to Go > Applications and double-click the UniF i icon. Proc eed to Configuring the UniF i Controller S oftware on page 15. PC Users 1. Launch UniFi-installer .ex e . 2. Click Install . 3. If your computer doesn't ha ve Jav a 1.
14 UniFi ™ AP Pro 4. Click Nex t . 5. Ensure that the Start UniFi Controller after installation option is checked and click Finish . Note: The UniF i Controller software can also be launched from Start > All Programs .
15 Software Installation Configuring the UniF i Controller Software 1. The UniF i Controller software star tup will begin. Click Launch a Browser t o Manage Wireless Netw ork . 2. Select your language and country. Click Next . Note: U.S. product versions are locked to the U.
16 UniFi ™ AP Pro 4. The UniF i Installation Wizard will create a secure primar y wireless network for y our devices. Perform the following steps: a. Enter the wireless network name (SSID) in the Secure SSID field. b. Enter a passphrase to be used f or your primar y network.
17 Software Installation 6. Review your settings. Click Back to make changes or F inish to save y our settings. Once finished you will be redirected to the management interface via your web browser . Congratulations , your wireless network is now configured .
18 UniFi ™ AP Pro Safety Notices 1. Read, f ollow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer . W ARNING: Do not use this product in location that can be submerged by water . W ARNING: A void using this product during an elec trical storm.
19 General Warr anty General W arranty UBIQUITI NET WORKS, Inc (“UBIQUITI NETWORKS”) represents and warrants that the Pr oducts furnished hereunder shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NET WORKS under normal use and operation.
20 UniFi ™ AP Pro Returns In the unlikely event a defect occurs, please work thr ough the dealer or distributor from which this product was purchased . Compliance F CC Changes or modifications not expressly approved b y the par ty responsible for compliance could v oid the user ’ s authorit y to operat e the equipment.
21 Compliance Pour réduire le risque d’interférence aux autres utilisateurs , le t ype d’antenne et son gain doivent être choisies de façon que la puissance isotrope ray onnée équivalente (PIRE) ne dépasse pas ce qui est néc essaire pour une communication réussie.
22 UniFi ™ AP Pro Declaration of Conf ormit y Česky [Czech] UBIQUITI NET WORKS tímto prohla uje , e tento UBIQUITI NET WORKS device, je v e shod se základními po adavky a dal ími p íslu n mi ustanoveními sm rnice 1999/5/ES.
23 Declaration of Conformity Latviski [Latvian] Ar o UBIQUITI NET WORKS deklar , ka UBIQUITI NE TWORKS device, atbilst Direkt vas 1999/5/EK b tiskaj m pras b m un citiem ar to saist tajiem noteikumiem.
PHRRJL041612 English W e recommend that you protect your networks from the most brutal envir onments and devastating ESD attacks with industrial-grade shielded Ethernet cable from Ubiquiti Networks .
.
Ubiquiti Networks Support Email: suppor t@ubnt.c om Phone (9 a.m. - 5 p .m. PST ): 408-942-1153 Online Resources Wiki Page: wiki.ubnt.com Support Forum: forum.ubnt.com Downloads: downloads.ubnt.c om www .ubnt.com © 2012 Ubiquiti Networks, Inc. All rights reserved .
An important point after buying a device Syscom UAPPRO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Syscom UAPPRO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Syscom UAPPRO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Syscom UAPPRO you will learn all the available features of the product, as well as information on its operation. The information that you get Syscom UAPPRO will certainly help you make a decision on the purchase.
If you already are a holder of Syscom UAPPRO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Syscom UAPPRO.
However, one of the most important roles played by the user manual is to help in solving problems with Syscom UAPPRO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Syscom UAPPRO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
