Instruction/ maintenance manual of the product LCD TV/DVD Symphonic
Go to page of 36
CSTL20D5 ( 20 inch ) If you need additional oper ating assistance after reading this owner's manual or to order replacement accessories, please call T OLL FREE : 1-800-242-7158. Or visit our WEB SITE at http://www .Symphonic.us L3254CE(p1-16).QX3 06.
P RECA UTIONS The caution marking is located on the rear of the cabinet. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SER VICEABLE P AR TS INSIDE.
- 3 - EN IMPOR T ANT COPYRIGHT INFORMA TION Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
- 4 - EN For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its installation: • The stand of this TV is fold- ed when you purchased. Place this TV face-down on a flat surface covered with the soft cloth.
- 5 - EN PRECA UTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORT ANT SAFEGU ARDS . . . . . . . . . . . . . . . . . . . . . .2 SUPPLIED A CCESSORIES . . . . . . . . . . . . . . . . . . . . . . .4 LOCA TION . . . . . . . . .
- 6 - EN • MTS/SAP T uner • Infrared r emote control • T rilingual on screen TV setup display available in English, Spanish or Fr ench • 181 channel capability PLL frequency synthesizer tuner with dir ect station call (A converter may be necessary to view scrambled cable channels.
- 7 - EN 1. PO WER button (P .1 1, P .18) Press to turn the power on and off. 2. PICTURE button (P .13) Press to adjust the picture. 3. Number buttons (P .1 1, P .21) Press to select a desired channel number directly . +100 button (For TV mode) Press to select channels higher than 99.
- 8 - EN 31. MENU button Press to enter or exit the setup menu of TV/DVD. 32. ST OP C button (P .18) Press to stop operation of the disc. 33. PLA Y B button (P .18) Press to playback of the disc. 34. EJECT A button (P .18) Press to remove a disc from the unit.
- 9 - EN IF YOU HA VE A JACK ON THE W ALL Connect the TV to the wall-mounted antenna jack with on RF cable (commercially available). IF YOU HA VE A WIRED CABLE Connect the TV to the wired antenna cable. • Before plugging the antenna into the ANT jack of the unit, check that the pin is not bent.
- 10 - EN • The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an MD or DA T deck. • If connected to a Dolby Digital decoder , set “DOLBY DIGIT AL ” to “BITSTREAM” for audio output in the setup mode.
- 11 - EN • Shaded buttons are used for following operation. 1 Plug the pow er cord into a standard AC outlet. • If any digits are displayed in the corner of the screen, press [PO WER] without unplugging the power cord. 2 Press [PO WER] to tur n on the unit.
- 12 - EN AUTO CHANNEL PROGRAMMING As the initial setting, this unit has memorized all channels, including the ones not available in your area. This feature automatically puts only available channels into the memory . 1 Press [SETUP] then press [ K ] or [ L ] to point to “CHANNEL SET UP” .
- 13 - EN • Shaded buttons are used for following operation. The unit’ s picture controls, brightness, contrast, color , tint and sharpness, are preset to factory speci- fications. Although they are usually the best, you may need to make some further adjustments for a more natural looking image.
- 14 - EN - 14 - EN Y ou can view specially labeled (cc) TV programs, movies, news and pre-recorded tapes with either a dialogue caption or text display . CAPTION mode: Y ou can watch dramas, movies and news while captioning the dialogues and the contents of news.
- 15 - EN - 15 - EN - 15 - EN - 15 - EN - 15 - EN • Shaded buttons are used for following operation. V -CHIP SET UP This feature enables parents to prevent their children from watching inappropriate material on TV . When you try to access a program which is blocked, “PRO- TECTED PROGRAM b y .
- 16 - EN - 16 - EN - 16 - EN - 16 - EN - 16 - EN - 16 - EN - 16 - EN 6 Press [SETUP] to e xit the menu. • To change the rating, the TV must be turned to an unprotected program. If “PRO TECTED PROGRAM b y ... ” appears on the screen, please change the channel to a station that is not protected.
– 17 – EN • NEVER play back the following discs. Otherwise, the unit may result in malfunction. DVD-RAM / CD-i / Photo CD / V ideo CD / MP3 / DVD with region codes other than 1 or ALL / DTS-CD /.
– 18 – EN • Shaded buttons are used for following operation. GETTING ST ARTED T urn on the power of amplifier and any other compo- nents, if necessary . 1 Press [PO WER] then the power will turn on. 2 Open the disc door manually . 3 Inser t a disc with the label facing bac k of the unit to star t playing it.
– 19 – EN 1 Press [DISC MENU] . • The DVD main menu will appear . • If the feature is not available, symbol may appear on the TV screen. • If disc menu is available on the disc, audio lan- guage, subtitle options, chapters for the title and other options will appear for selection.
– 20 – EN 1 During playbac k, press [FWD D ] or [REV E ] . • “ D 1” or “ E 1” appears on the screen. 2 To select another speed, repeat step 1 until y our required speed n umber appears on the screen. • For DVDs, fast forward/reverse search speed is different depending on the disc.
– 21 – EN • Shaded buttons are used for following operation. There are three ways to begin playback on an Audio CD at a specific track. Using the Number buttons 1 Press the Number buttons to enter the desired trac k number . • Playback will start at the selected track.
– 22 – EN 1 During playbac k, press [SEARCH MODE] repeatedly to displa y the Time Search on the TV screen. 2 Within 30 seconds, enter a desired disc time using the Number buttons . • Playback will start at the specified time. • Press [CLEAR] to erase the incorrect input.
– 23 – EN • Shaded buttons are used for following operation. REPEA T is available only during playback. For DVD-Vs 1 To activ ate the repeat function, press [REPEA T] during playbac k. • The repeat mode changes as described below every time you press the button.
– 24 – EN Y ou may determine the order in which tracks will play . 1 In stop mode, press [MODE] . • The “PROGRAM” screen will appear . 2 Press [ ▲ ] or [ ▼ ] to select a trac k, then press [ENTER]. • Press [CLEAR] to erase the most recently entered track.
– 25 – EN • Shaded buttons are used for following operation. The unit allows you to select a language for subtitles during DVD disc (if available) playback. 1 Press [SUBTITLE] during playbac k. • The subtitle language will appear on the display bar at the top of the TV screen.
– 26 – EN Some DVD discs contain scenes which have been shot simultaneously from various angles. Y ou can change the camera angle when the “” icon appears on the screen. 1 Press [ANGLE] during playbac k. • The selected angle will be displayed on the dis- play bar at the top of the screen.
– 27 – EN • Shaded buttons are used for following operation. Y ou can check the information about the current disc by pressing [DISPLA Y] . For DVD-Vs 1 Press [DISPLA Y] during playbac k to show current Chapter . 2 Press [DISPLA Y] again to show current Title.
– 28 – EN • Shaded buttons are used for following operation. Y ou can change the DVD player ’ s settings. 1 In stop mode, press [SETUP] twice , [ L ] to select “CUST OM” then press [ENTER] . • If the menu does not appear , press [PLA Y O ] first, then press [ST OP C ] .
3 Press [ K ] or [ L ] to select the below items then press [ENTER] . TV MODE: Y ou can change certain aspects of the DVD display screens and on-screen messages on the TV screen. • 4:3 LETTER BOX (default): T o show black bars on top and bottom of the screen.
– 30 – EN 4 Press [ K ] or [ L ] to select “P ARENT AL LEVEL ” then press [ENTER] . 5 Press [ K ] or [ L ] to select the desired lev el then press [ENTER] . 6 Press [SETUP] to exit the men u. • When doing this for the first time, enter any 4 digits.
– 31 – EN – 31 – If you choose a language that has a 3 letter language code, the code will be displayed every time you change the AUDIO or SUBTITLE language setting above. If you choose any other languages, ‘---’ will be displayed instead.
– 32 – EN Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money . TV Mode PROBLEM CORRECTIVE ACTION No picture or sound • Make sure the AC cord is connected to an AC outlet.
– 33 – EN CLOSED CAPTION PROBLEM POSSIBLE REMEDY Misspelling in captions • Error committed by the closed captioning production company . • Possible in a live broadcast. Not in case of a prerecorded program. T ext is not shown in its entirety or • A few seconds of delay is common for live broadcast.
– 34 – EN • Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner ’ s Manual for details on correct operations. • Playback from a desired track and random playback are not available during program playback.
– 35 – EN CABINET CLEANING • W ipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry . • Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces.
Printed in China 1EMN21635 L3254CE ★★★★ FUNAI CORPORA TION LIMITED W ARRANTY FUNAI CORP . will repair this product, free of charge in CANADA in the event of defect in materials or workmanship as follows: DURA TION : PA R TS : FUNAI CORP .
An important point after buying a device Symphonic LCD TV/DVD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Symphonic LCD TV/DVD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Symphonic LCD TV/DVD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Symphonic LCD TV/DVD you will learn all the available features of the product, as well as information on its operation. The information that you get Symphonic LCD TV/DVD will certainly help you make a decision on the purchase.
If you already are a holder of Symphonic LCD TV/DVD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Symphonic LCD TV/DVD.
However, one of the most important roles played by the user manual is to help in solving problems with Symphonic LCD TV/DVD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Symphonic LCD TV/DVD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
