Instruction/ maintenance manual of the product SRC2213B Sylvania
Go to page of 32
COLOR TV/VCR SRC2213B SRC2319 O WNER’S MANU AL As an E NERGY S TAR Partner, our company has determined that this product meets the E NERGY S TAR guidelines for energy efficiency.
- 2 - EN 1K09 1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All warnings on the appliance and in the operating instructions should be adhered to.
- 3 - EN 1K09 13.Outdoor Antenna grounding- If an outside antenna or cable system is connected to the TV/VCR, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFP A No.
- 4 - EN 1K09 AV OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- 5 - EN 1K09 T ABLE OF CONTENTS A NOTE ABOUT RECYCLING This product’ s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.
- 6 - EN 1K09 FEA TURES • Infrared remote control • Bilingual on screen menu displa y selectable in English or Spanish • Real time counter– This shows the elapsed record- ing or playback time in hours, minutes, and sec- onds. The “–” indication will appear when the tape is rewound further than the tape counter position “0:00:00”.
- 7 - EN 1K09 OPERA TING CONTROLS AND FUNCTIONS NOTE: • We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control. If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit.
- 8 - EN 1K09 - REAR VIEW - [Fig.3] ANT . 27 26 8 REW button– Press to rewind the tape, or to view the picture rapidly in reverse during playback mode. (Rewind Search) s b utton– • Press to select a mode from a particular menu. (for example: LANGUAGE or USER’S SET UP) 9 PLA Y button– Press to begin playback.
- 9 - EN 1K09 PREP ARA TION FOR USE ANTENNA/CABLE CONNECTIONS VHF/UHF COMBINED ANTENNA The VHF/UHF Rod Antenna (supplied with 13” model only) is detachable. Insert the stem of the anten- na into the hole on the upper-back portion of the TV/VCR. Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the ANT .
- 10 - EN 1K09 1 Plug in the TV/VCR po wer cord Plug the TV/VCR power cord into a standard AC outlet. NOTE: • If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.
- 11 - EN 1K09 CLOCK SET UP (AUTO / MANUAL) TO SELECT A DESIRED CHANNEL Y ou can select the desired channel by using the CHANNEL K or L button on or directly pressing the number buttons on the remote control.
- 12 - EN 1K09 DELETING (OR ADDING) CHANNEL CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/VCR. 1 Select “CHANNEL SET UP” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “CHANNEL SET UP”.
- 13 - EN 1K09 1 Select “CHANNEL SET UP” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “CHANNEL SET UP”. Then, press the F .FWD/ B button. 2 Select “ADD/DELETE CH” Press the PLA Y/ K or STOP/ L but- ton to point to “ADD/DELETE CH”.
- 14 - EN 1K09 TV OPERA TION WA TCHING A TV PROGRAM 1 T urn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control.
- 15 - EN 1K09 CLOSED CAPTION SYSTEM Y ou can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dia- logue caption or text display . CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news.
- 16 - EN 1K09 5 Exit the V -Chip setting mode Press the MENU button on the remote control to enter the setting and exit the screen. V -CHIP SET UP SUB RA TINGS When you select the ratings of TV -Y7,TV -PG,TV -14 or TV -MA you will have the option of selecting sub rating categories.
- 17 - EN 1K09 The TV/VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLA Y button. ALL REPEA T: Repeat playback from the beginning to the end of the tape. BLANK REPEA T : Repeat playback from the begin- ning to a blank part, which is blank for more than 10 seconds.
- 18 - EN 1K09 PICTURE SEARCH This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1)Y ou may view a video tape at a high speed in either a forward or reverse direction by pressing the F .
- 19 - EN 1K09 STILL PICTURE Y ou can view a still picture on the TV screen during playback (the Still mode). Press the P AUSE/STILL button during playback. Only tapes recorded in the SLP mode will show the least amount of lines.Press the PLA Y button to return to playback.
- 20 - EN 1K09 Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.) Y ou can ONL Y watch the same TV program that is being recorded.
- 21 - EN 1K09 Push(es) Display Recording length 1 push (normal recording) 2 pushes 0:30 30 minutes 3 pushes 1:00 60 minutes 17 pushes 8:00 480 minutes • To stop the OTR operation, press the STOP button on the TV/VCR or on the remote control.
- 22 - EN 1K09 3 Set the channel number Press the PLA Y/ K or STOP/ L but- ton until the desired channel num- ber appears. (Example: CH61) Then, press the F .
- 23 - EN 1K09 TO CORRECT A PROGRAM • While setting a program; press the REW/ s but- ton to go back one step and enter the correct num- bers using the PLA Y/ K or STOP/ L button. • After setting a pr ogram; 1)Press the POWER button. 2)Repeat steps [1] - [2] on page 21.
- 24 - EN 1K09 2 Select “TV” or “T APE” Press the PLA Y/ K or STOP/ L but- ton until to point to “TV/T APE”. Press the F .FWD/ B or REW/ s button, and select [TV] or [T APE]. 3 Set wake up time Press the PLA Y/ K or STOP/ L but- ton until to point to “TIME”.
- 25 - EN 1K09 CABINET CLEANING • W ipe the front panel and other exterior surfaces of the TV/VCR with a soft cloth immersed in luke- warm water and wrung dry . • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/VCR. Such chemicals may cause damage and discoloration to the exposed surfaces.
- 26 - EN 1K09 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below . Check the corresponding CORRECTIVE ACTION column to remedy the problem.
- 27 - EN 1K09 SPECIFICA TIONS GENERAL SPECIFICA TIONS CR T : 13 or 19 inch in-line gun, 90˚ deflection tube T elevision system : NTSC-M Closed caption system : §15.1 19/FCC V ideo Heads : Rotary two-head T ape width : 1/2 inch T ape speed SP : 33.40mm/sec.
- 28 - ES 1K09 1 T oma de entrada de vídeo (VIDEO)– Conéctela a la toma de salida de vídeo de su videocámara u otra videograbadora. 2 To ma de entrada de audio (A UDIO)– Conéctela a la toma de salida de audio de su equipo de audio, videocámara u otra videograbadora.
- 29 - ES 1K09 ANT . 27 26 (Por ejemplo: IDIOMA o ADJUST DE USER) 9 Botón de reproducción (PLA Y)– Púlselo para iniciar la reproducción. Botón K – • Púlselo para seleccionar los modos de ajuste desde el menú de la pantalla. • Púlselo para introducir dígitos cuando establezca un programa.
- 30 - ES 1K09 CONEXIONES DE ANTENA/CABLE ANT. IN OUT ANT . Antena de varilla UHF/VHF (incluído para solamente 13”) Antena combinada de VHF/UHF (no incluído) Combinador de VHF/UHF (no incluído) C.
- 31 - ES 1K09 PREP ARACIÓN DE CANALES POR PRIMERA VEZ 1) Enchufe el cable de alimentación del televisor/videograbadora en una toma de CA están- dar . NOT A: Si aparezcan algunos digitos en el rincón de la pantalla, pulse el botón POWER sin desenchufar el cable de alimentación.
Printed in Malaysia 0EMN02083 T5407UH / T7408UJ * * * * * LIMITED 90 D A Y W ARRANTY FOR 13 INCH MODEL If this (product) e xper iences any f ailure due to a defect in material or workmanship within 90 days from the date of purchase, return it to your nearest Sears store, and it will be replaced free of charge .
An important point after buying a device Sylvania SRC2213B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sylvania SRC2213B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sylvania SRC2213B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sylvania SRC2213B you will learn all the available features of the product, as well as information on its operation. The information that you get Sylvania SRC2213B will certainly help you make a decision on the purchase.
If you already are a holder of Sylvania SRC2213B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sylvania SRC2213B.
However, one of the most important roles played by the user manual is to help in solving problems with Sylvania SRC2213B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sylvania SRC2213B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
