Instruction/ maintenance manual of the product INS1007 Sylvania
Go to page of 2
SilverStar ® is a registered trademark of OSRAM GmbH used under license. SYL V ANIA is a registered trademark of OSRAM SYL V ANIA INC. T orx ® is a registered trademark of T extron Inc.
Sealed Beam Headlight Replacement 1 Remove the exterior fascia. 2 The metal retainer ring is held in with 3-4 screws and should not be confused with the aiming screws. Remove the retainer ring while sup- porting the sealed beam (which may come out at the same time).
An important point after buying a device Sylvania INS1007 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sylvania INS1007 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sylvania INS1007 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sylvania INS1007 you will learn all the available features of the product, as well as information on its operation. The information that you get Sylvania INS1007 will certainly help you make a decision on the purchase.
If you already are a holder of Sylvania INS1007, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sylvania INS1007.
However, one of the most important roles played by the user manual is to help in solving problems with Sylvania INS1007. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sylvania INS1007 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
