Instruction/ maintenance manual of the product 6719DDS Sylvania
Go to page of 56
COLOR TV/D VD/VCR TRIPLE COMBO 6719DDS (19 inc h) O WNER’S MANU AL As an E NERGY S TAR Partner, our company has determined that this product meets the E NERGY S TAR guidelines for energy efficiency.
1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All warnings on the appliance and in the operating instructions should be adhered to.
- 3 - EN 1B15 13.Outdoor Antenna grounding- If an outside antenna or cable system is connected to the TV/DVD/VCR, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFP A No.
- 4 - EN 1B15 RADIO-TV INTERFERENCE This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- 5 - EN 1C29 AV OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE LOCA TION For safe operation and satisfactory performance of your TV/DVD/VCR, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat.
- 6 - EN 1C29 T ABLE OF CONTENTS C IMPORT ANT SAFEGUARDS . . .2, 3 C PRECAUTIONS . . . . . . . . . . . . . . . .4 LOCA TION . . . . . . . . . . . . . . . . . . .5 A VOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE . . .5 W ARNING . . . . . . . . . . . . .
- 7 - EN 1C29 • Hi-Fi system – The Hi-Fi stereo recording system offers you excellent sound quality with a dynamic range of 80dB, frequency response from 20Hz to 20kHz, and 0.005% wow and flutter . • Rotary 4-head Record/Playbac k System– Four heads ensure excellent picture quality and special ef fects playback.
- 8 - EN 1C29 ¡ Dolby Digital sound This player can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder . ¡ Still/fast/slow/step pla yback V arious playback modes are available including still pictures, fast forward/reverse, slow motion and step frames.
- 9 - EN 1C29 OPERA TING CONTROLS AND FUNCTIONS 5. ST OP Button [P .37] Stops operation of the disc. (Front Panel) Stops operation of the disc or tape. (Remote control) 6. OPEN/CLOSE Button [DVD P .37] Press to insert discs into or remove them from the tray .
- 10 - EN 1C29 ANT. L AU DIO OUT R COAXIAL 47 46 48 49 20. A UDIO L/R input Jacks Connect to the audio output jacks of a video camera or VCR. 21. Cassette compartment 22. PICTURE Button Press to adjust the picture. 23. Number Buttons TV Mode: [P .15] Press two digits to directly access the desired channel.
- 11 - EN 1C29 CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SA TELLITE BOX If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the illustration. By using this connection you can also record scram- bled channels.
- 12 - EN 1C29 TO RECORD A SCRAMBLED/UNSCRAM- BLED CHANNEL 1. Set the TV/DVD/VCR channel selector to the out- put channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to record from your Cable Converter Box or Satellite Box.
- 13 - EN 1C29 CONNECTING TO A STEREO SYSTEM ANT. L AU DIO OUT R COAXIAL To Right (red) and Left (white) A UDIO OUT jacks Stereo system To ANALOG AUDIO INPUT jac ks NOTES: • Be sure to turn off the power to all components in the system before connecting another component.
- 14 - EN 1C29 ANT. L AU DIO OUT R COAXIAL F ront speaker (left) Center speaker F ront speaker (right) Surround speaker (left) Surround speaker (right) Subwoof er To DIGIT AL AUDIO OUT (PCM/BITSTREAM) COAXIAL jac k To COAXIAL DIGIT AL A UDIO INPUT jac k Dolby Digital decoder [Fig.
- 15 - EN 1C29 SET UP FOR USE Y ou can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3).
- 16 - EN 1C29 CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/DVD/VCR. 1 Select “CHANNEL SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to point to “CHANNEL SET UP”. Then, press the ENTER button.
- 17 - EN 1C29 CLOCK SET UP (AUTO / MANUAL) The TV/DVD/VCR clock must be set correctly before VCR timer recording is possible. It is suggested that the clock be set manually when first setting up the TV/DVD/VCR. Then, setup auto clock correction which will periodically correct the setting if necessary .
- 18 - EN 1C29 AUTOMA TIC CLOCK SETTING Make sure ... • The TV/DVD/VCR is turned on. • Confirm the TV/DVD/VCR is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT IN jack on the rear of the TV/DVD/VCR.
- 19 - EN 1C29 TV OPERA TION DEGAUSSING Magnetism from nearby appliances and speakers might affect the color of the TV picture. If this happens, move this TV/VCR/DVD away from the appliance. If the color is still not correct, unplug the power cord, then plug it in again 30 minutes or so later .
- 20 - EN 1C29 CLOSED CAPTION SYSTEM Y ou can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dia- logue caption or text display . CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news.
- 21 - EN 1C29 5 Exit the V -Chip setting mode Press the SETUP button on the remote control to exit the screen. V -CHIP SET UP Make sure ... • TV/DVD/VCR is turned on. 1 Select “V -CHIP SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to select “V -CHIP SET UP”.
- 22 - EN 1C29 CHANGING V -CHIP BLOCKED PRO- GRAMMING Note: To change the rating, the TV must be turned to a station that is not protected. If the (PROTECTED) appears on the screen, please change the channel to a station that is not protected. 1)Follow steps [1] and [2].
- 23 - EN 1C29 MTS(Multi-Channel T elevision sound)SYSTEM Y ou can record or listen to a program in MTS stereo. CHECKING THE SELECTED MTS MODE When you play a VHS tape, or receive a broadcast on the TV/DVD/VCR tuner channel you are watching, the status shown below will appear when you press the DISPLA Y button on the remote control.
- 24 - EN 1C29 SELECTING THE MTS SYSTEM Make sure ... • TV/DVD/VCR power must be turned on. TO SELECT HIFI MODE 1 Select “USER’S SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to point to “USER’S SET UP”.
- 25 - EN 1C29 VIDEO CASSETTE This TV/DVD/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. REMOVING A CASSETTE 1)In the Stop mode, press the EJECT button on the remote control or press the STOP/EJECT button on the TV/DVD/VCR.
- 26 - EN 1C29 PLA YBACK NORMAL PLA YBACK Make sure ... • TV/DVD/VCR power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the TV/DVD/VCR will start playback automatically . 2 To begin playbac k Press the PLA Y button.
- 27 - EN 1C29 SPECIAL PLA YBACK This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 Select “USER’S SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to point to “USER’S SET UP”.
- 28 - EN 1C29 SEARCH Make sure ... • TV/DVD/VCR power must be turned on. • Insert a tape. This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape.
- 29 - EN 1C29 INDEX SEARCH This feature provides a method of indexing the start- ing point so that it can be easily returned to in either fast forward or rewind mode. • The index mark will be made automatically when the REC button is pressed. It will also be marked at the starting point of T imer recording and OTR.
- 30 - EN 1C29 RECORDING Make sure ... • TV/DVD/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: • This TV/VCR/DVD will ONL Y record and view the same channel.
- 31 - EN 1C29 This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/DVD/VCR. Make sure ... • TV/DVD/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.
- 32 - EN 1C29 TIMER Y ou may set the TV/DVD/VCR to start and end a recording while you are away . Y ou can set 8 pro- grams to record on specific days, daily or weekly within a 1 year period. In the example below , the timer is being set to recor d: DA TE: July 4th, 2003 SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61 T APE SPEED: SP Make sure .
- 33 - EN 1C29 To shift the time schedule of an automatic timer recording. 1)Press the POWER button. 2)Repeat step [1] on page 32. 3)Press the RECORD button and select the desired program using the Arrow button K or L . 4)Press the RECORD button again.
- 34 - EN 1C29 TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the RECORDING indicator goes off. 2)Press the SETUP button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the ENTER button. The details of programs appear on the TV screen.
- 35 - EN 1C29 ON SCREEN DISPLA Y To check the Counter, Clock and Channel number on the TV screen, press the DISPLA Y button on the remote control. Each time you press the DISPLA Y button on the remote control, the TV screen will change as follows: When the Closed Caption mode is OFF: • Counter mode: After 5 seconds, only the counter remains.
– 36 – EN 01A1 1 D VD SECTION ABOUT THE DISCS DISC TYPES The following discs can be played back on this TV/DVD/VCR. ¡ D VD video ¡ D VD-R/R W* ¡ D VD+R/R W* ¡ A udio CD ¡ CD-R/R W* ¡ MP3* * Depending on the types or the writing method of the medium some discs can not be played.
– 37 – EN 01A1 1 PLA YING A DISC BASIC PLA YBACK Getting started ¡ T urn on the power of amplifier and any other com- ponents, if necessary . 1 Press the PO WER button. ¡ The power will turn on. 2 Press the OPEN/CLOSE button to open disc loading tray .
– 38 – EN 01A1 1 STEP BY STEP PLA YBACK 1 During playbac k, press the P A USE button. ¡ Playback will pause and sound will be muted. 2 The disc goes forwar d b y one frame each time the P A USE b utton is pressed. 3 To e xit step by step pla yback, press the PLA Y button.
– 39 – EN 01A1 1 SEARCH FUNCTION TRACK SEARCH There are three ways to begin playback on an Audio CD at a specific T rack. Using the Number buttons on the remote control 1 Press the Number buttons to enter the desired T rack number . ¡ Playback will start at the selected track.
– 40 – EN 01A1 1 SPECIAL PLA YBACK FUNCTION REPEA T REPEA T TITLE / CHAPTER To activate the repeat function, press the REPEA T button during playbac k. ¡ The repeat mode changes as described below every time you press the button. DVD-V REPEA T is available only during playback.
– 41 – EN 01A1 1 PLA YING A MP3 DISC When a CD with MP3 files is in the TV/DVD/VCR, the MP3 menu will appear on the TV screen in stop mode. 1 In stop mode, press the Arro w b uttons ( K / L ) to select the desired group trac k. ¡ If a group is selected, press the Arrow B or ENTER but- ton to go on to the track selec- tion screen.
– 42 – EN 01A1 1 CHANGING THE SETTINGS AUDIO LANGUAGE The TV/DVD/VCR allows you to select a language during DVD disc (if multi language available) play- back. 1 Press the A UDIO button during playbac k. 2 Press the A UDIO button repeatedly to select yo ur desired language .
– 43 – EN 01A1 1 For DVD-Vs 1 Press the DISPLA Y button during pla ybac k to show current Chapter . ¡ The elapsed and remaining playing time of the current chapter will be displayed. 2 Press the DISPLA Y button a gain to show current Title. ¡ The elapsed and remaining playing time of the cur- rent title will be displayed.
– 44 – EN 01A1 1 CHANGING THE DVD SETUP ITEMS LANGUAGE SETTING Language options are not available with some discs. 1 Press the SETUP button twice in ST OP mode so that the D VD SETUP menu appears. ¡ If the menu does not appear , press the PLA Y button, the STOP button, then the SETUP button twice.
– 45 – EN 01A1 1 AUDIO SETTINGS Choose the appropriate Audio settings for your equip- ment as it only affect during the playback of DVD discs. 1 Press the SETUP button twice in ST OP mode so that the D VD SETUP menu appear s. ¡ If the menu does not appear , press the PLA Y button, the STOP button, then the SETUP button twice.
– 46 – EN 01A1 1 – 46 – CONTROL LEVELS ¡ ALL All parental lock is cancelled. ¡ Level 8 DVD software of any grade (adult/general/children) can be played back. ¡ Levels 7 to 2 Only DVD software intended for general use and children can be played back.
– 47 – EN 01A1 1 Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money . TV/VCR Mode TROUBLESHOOTING GUIDE PROBLEM CORRECTIVE ACTION No picture and sound.
– 48 – EN 01A1 1 CLOSED CAPTION PROBLEM POSSIBLE REMEDY My TV/DVD/VCR is showing • Y ou are watching a live broadcast and spelling errors made by the captions that are misspelled. • closed captioning production company may pass through uncorrected.
– 49 – EN 01A1 1 NOTES: • Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner ’ s Manual for details on correct operations. • Playback from a desired track and random playback are not available during program playback.
– 50 – EN 01A1 1 EN 01A1 1 CABINET CLEANING • W ipe the front panel and other exterior surfaces of the TV/DVD/VCR with a soft cloth immersed in lukewarm water and wrung dry . • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/DVD/VCR.
– 51 – EN 01A1 1 CR T 19 inch in-line gun, 90˚ deflection tube T elevision system : NTSC-M Closed caption system : §15.1 19/FCC V ideo Heads : Rotary four-head T ape width : 1/2 inch T ape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 1 1.12mm/sec.
– 52 – ES 0C28 INDICE ■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 52 P ANEL FRONT AL DEL TELEVISOR/DVD . . . . . . . . . . 52 MANDO A DIST ANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 52 VIST A POSTERIOR . . . . . . . . . . . . . .
– 53 – ES 0C28 30. Botón CLEAR Para cancelar ajustes. 31. Botón MODE Activa el modo de reproducción programada o el modo de reproducción aleatoria. 32. Botón SEARCH MODE Presione este botón para localizar un punto deseado. 33. Botón A UDIO Presione este botón para seleccionar un idioma de audio o el modo de sonido deseado.
SECCIÓN DE TV/VCR – 54 – ES 0C28 MODO DE ENTRADA EXTERNA Al usar una señal de entrada externa (otra videograbado- ra o una videocámara), conecte los cables de salida de audio/vídeo del equipo externo a las tomas AUDIO L/R IN/ VIDEO IN de su televisor/DVD/videograbadora.
– 55 – ES 0C28 CÓMO BORRAR (AGREGAR) CANALES 2 Seleccione “AGREGAR/BORRAR” Presione el botón de flecha K o L para señalar “AGREGAR/BORRAR”. Presione el botón ENTER. 3 Introduzca el número del canal deseado Presione el botón de flecha K o L hasta que aparez- ca el número del canal deseado.
Printed in Malaysia 0EMN02219 TD858UJ ★★★★ LIMITED W ARRANTY FUNAI CORP . will repair this SYL V ANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURA TION: PA R TS: FUNAI CORP .
An important point after buying a device Sylvania 6719DDS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sylvania 6719DDS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sylvania 6719DDS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sylvania 6719DDS you will learn all the available features of the product, as well as information on its operation. The information that you get Sylvania 6719DDS will certainly help you make a decision on the purchase.
If you already are a holder of Sylvania 6719DDS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sylvania 6719DDS.
However, one of the most important roles played by the user manual is to help in solving problems with Sylvania 6719DDS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sylvania 6719DDS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
