Instruction/ maintenance manual of the product 6615LDG Sylvania
Go to page of 44
If you need additional oper ating assistance after reading this owner's man ual or to order replacement accessories, please call T OLL FREE : 1-800-968-3429.
EN - 2 - I MPOR T ANT SAFEGU ARDS P RECA UTIONS The caution marking is located on the rear of the cabinet. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SER VICEABLE P AR TS INSIDE. REFER SER VICING TO QUALIFIED SER VICE PERSONNEL.
- 3 - EN - 3 - EN Date of Purchase Dealer Purchase from Dealer Address Dealer Phone No. Model No. Serial No. IMPOR T ANT COPYRIGHT INFORMA TION Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.
EN - 4 - Batteries Remote Control Unit 2 AA Batteries ( NE240UD ) Owner ’ s Manual ( 1EMN21899 ) S UPPLIED A CCESSORIES • If you need to replace these accessories, please refer to the P AR T NO. under the illustrations and call our help line mentioned on the front page.
- 5 - EN PRECA UTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORT ANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . .2 SUPPLIED A CCESSORIES . . . . . . . . . . . . . . . . . . . . . . .4 LOCA TION . . . . . . . . . .
EN - 6 - • MTS/SAP T uner • Infrared r emote control • T rilingual on screen TV setup display available in English, Spanish or Fr ench • 181 channel capability PLL fr equency synthesizer tuner with dir ect station call (A converter may be necessary to view scrambled cable channels.
- 7 - EN - 7 - EN - 7 - EN - 7 - EN - 7 - EN - 7 - EN - REMO TE CONTROL O PERA TING CONTROLS AND FUNCTIONS NO TE • When you select DVD mode, press [PLA Y O O ] or [EJECT A ] first or insert a disc into the disc slot. Otherwise, the DVD features are not operated.
EN - 8 - NO TE • We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control. If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit.
IF YOU HA VE A JACK ON THE W ALL Connect the TV to the wall-mounted antenna jack with on RF cable (commercially available). IF YOU HA VE A WIRED CABLE Connect the TV to the wired antenna cable. • Before plugging the antenna into the ANT jack of the unit, check that the pin is not bent.
EN - 10 - Y ou can connect this unit to your own Audio/V ideo equipment. • Be sure to turn off the power to all components in the system before connecting another component. • Refer to the Owner ’ s Manuals for the equipment to be connected to the unit.
VOLUME 20 C C C C C C C C C C C C C C C C - HELPFUL HINTS - 1. PLEASE CHECK TO SEE IF THE ANTENNA/CABLE/SATELLITE IS PROPERLY CONNECTED. 2. DID YOU PERFORM “AUTO PRESET CH” ? 3. PLEASE REFER TO FRONT PAGE OF THE OWNER’S MANUAL OR REAR PANEL FOR SUPPORT LINE INFORMATION.
EN - 12 - AUTO CHANNEL PROGRAMMING As the initial setting, this unit has memorized all channels, including the ones not available in your area. This feature automatically puts only available channels into the memory . 1 Press [SETUP] then press [ K ] or [ L ] to point to “CHANNEL SET UP” .
• Shaded buttons are used for following operation. The unit’ s picture controls, brightness, contrast, color , tint and sharpness, are preset to factory speci- fications. Although they are usually the best, you may need to make some further adjustments for a more natural looking image.
EN - 14 - Y ou can view specially labeled (cc) TV programs, movies, news and pre-recorded tapes with either a dialogue caption or text display . CAPTION mode: Y ou can watch dramas, movies and news while captioning the dialogues and the contents of news.
- 15 - EN - 15 - EN - 15 - EN - 15 - EN - 15 - EN • Shaded buttons are used for following operation. V -CHIP SET UP This feature enables parents to prevent their children from watching inappropriate material on TV . When you try to access a program which is blocked, “PRO- TECTED PROGRAM b y .
EN - 16 - 6 Press [SETUP] to e xit the menu. • To change the rating, the TV must be turned to an unprotected program. If “PRO TECTED PROGRAM b y ... ” appears on the screen, please change the channel to a station that is not protected. MP AA RA TING SET UP Follow steps 1 to 3 in the V- CHIP SET UP on page 15.
– 17 – EN • NEVER play back the following discs. Otherwise, the unit may result in malfunction. DVD-RAM / CD-i / Photo CD / V ideo CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-R.
– 18 – EN • Shaded buttons are used for following operation. GETTING ST ARTED T urn on the power of amplifier and any other compo- nents, if necessary . 1 Press [PO WER] then the power will turn on. 2 Open the disc door manually . 3 Inser t a disc with the label facing bac k of the unit to star t playing it.
– 19 – EN 1 Press [DISC MENU] . • The DVD main menu will appear . • If the feature is not available, symbol may appear on the TV screen. • If disc menu is available on the disc, audio lan- guage, subtitle options, chapters for the title and other options will appear for selection.
– 20 – EN 1 During playbac k, press [FWD g ] or [REV h ] . • “ g 1” or “ h 1” appears on the screen. 2 To select another speed, repeat step 1 until y our required speed n umber appears on the screen. • For DVDs, fast forward/reverse search speed is different depending on the disc.
– 21 – EN • Shaded buttons are used for following operation. There are three ways to begin playback on an Audio CD and CD-R W/-R with MP3 files at a specific track. Using the Number buttons 1 Press the Number buttons to enter the desired trac k number .
– 22 – EN 1 During playbac k, press [SEARCH MODE] repeatedly to displa y the Time Search on the TV screen. 2 Within 30 seconds, enter a desired disc time using the Number buttons . • Playback will start at the specified time. • Press [CLEAR] to erase the incorrect input.
– 23 – EN • Shaded buttons are used for follo wing operation. REPEA T is av ailable only during playback. F or D VD-Vs 1 To activate the repeat function, press [REPEA T] during playback. • The repeat mode changes as described below ev ery time you press the button.
– 24 – EN Y ou may determine the order in which tracks will play . 1 In stop mode, press [MODE] . • The “PROGRAM” screen will appear . 2 Press [ ▲ ] or [ ▼ ] to select a track, then press [ENTER]. • Press [CLEAR] to erase the most recently entered track.
– 25 – EN • Shaded buttons are used for follo wing operation. The unit allows you to select a language for subtitles during D VD disc (if available) playback. 1 Press [SUBTITLE] during playback. • The subtitle language will appear on the display bar at the top of the TV screen.
– 26 – EN NOTE Some D VD discs contain scenes which have been shot simultaneously from various angles. Y ou can change the camera angle when the “” icon appears on the screen. 1 Press [ANGLE] during playback. • The selected angle will be displayed on the dis- play bar at the top of the screen.
• Shaded buttons are used for follo wing operation. Y ou can check the information about the current disc by pressing [DISPLA Y] . F or D VD-Vs 1 Press [DISPLA Y] during playback to show current Chapter . 2 Press [DISPLA Y] again to show current T itle.
– 28 – EN • Shaded buttons are used for follo wing operation. Y ou can change the D VD player’ s settings. 1 In stop mode, press [SETUP] twice, [ L ] to select “CUSTOM” then press [ENTER] . • If the menu does not appear , press [PLA Y O ] f irst, then press [ST OP C ] .
– 29 – EN 3 Press [ K ] or [ L ] to select the below items then press [ENTER] . TV MODE: Y ou can change certain aspects of the D VD display screens and on-screen messages on the TV screen. • 4:3 LETTER BO X (default): T o show black bars on top and bottom of the screen.
– 30 – EN 4 Press [ K ] or [ L ] to select “P ARENT AL LEVEL” then press [ENTER] . 5 Press [ K ] or [ L ] to select the desired level then press [ENTER] . 6 Press [SETUP] to exit the menu. • When doing this for the first time, enter an y 4 digits.
– 31 – EN – 31 – If you choose a language that has a 3 letter language code, the code will be displayed e very time you change the A UDIO or SUBTITLE language setting abov e. If you choose any other languages, ‘---’ will be displayed instead.
– 32 – EN Sometimes a performance problem can be easily solved by checking seemingly apparent b ut often ov erlooked possibilities. Before arranging for service, check these items. It could sav e your time and money . TV Mode PR OBLEM CORRECTIVE A CTION No picture or sound • Make sure the A C cord is connected to an AC outlet.
– 33 – EN CLOSED CAPTION PR OBLEM POSSIBLE REMED Y Misspelling in captions • Error committed by the closed captioning production company . • Possible in a liv e broadcast. Not in case of a prerecorded program. Te xt is not shown in its entirety or • A few seconds of delay is common for li ve broadcast.
– 34 – EN • Some functions are not av ailable in specific modes, but this is not a malfunction. Read the description in this Owner’ s Manual for details on correct operations. • Playback from a desired track and random playback are not av ailable during program playback.
– 35 – EN CABINET CLEANING • W ipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in luke warm water and wrung dry . • Nev er use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces.
ES - 36 - 1. Botón PO WER Presione para encender y apagar la unidad. 2. Botón PICTURE Presione para ajustar la imagen. 3. Botones numéricos Presione para seleccionar directamente el número de canal deseado . Botón +100 (para modo TV) Presione para seleccionar canales cuyo número sea superior a 99.
P ARA INSER T AR LAS PILAS 1 Abra la cubier ta del compar timiento de las pilas empujando la cubier ta del mando a dis- tancia en el sentido de la flecha. 2 Inser te 2 pilas “AA” en el compar timiento de las pilas, en el sentido indicado por las mar- cas de polaridad (+/-).
ES - 38 - SI TIENE UNA TOMA DE P ARED Conecte el televisor a la toma de antena de pared con el cable RF (disponible en los comercios). SI TIENE CABLE DE HILOS Conecte el televisor al cable de antena. • Antes de conectar la antena en la toma ANT de la unidad, compruebe que la patilla no esté torcida.
- SALID A DE A UDIO D IG IT A L A U D IO O U T (C O A X IA L ) Descodificador Dolby Digital A toma de ENTRADA DIGITAL COAXIAL DE AUDIO Equipo doméstico de audio Podrá disfrutar de un sonido de DVD con más presencia desconectando el equipo de audio digital, tal como el descodificador Dolby Digital.
VOLUMEN 20 C C C C C C C C C C C C C C C C VOL. ES - 40 - - SUGERENCIAS ÚTILES - 1. VERIFIQUE ANTENA/CABLE/STATÉLITE ESTÁ BIEN CONECTADO. 2. VERIFIQUE “PREA. AUTO CA.” ESTÁ BIEN AJUSTADO. 3. LEA LA PÁGINA FRONTAL DEL MANUAL DEL USUARIO O PANEL TRASERO PARA EL NO.
- 41 - ES PROGRAMACIÓN AUTOMÁTICA DE CANAL De acuerdo con la configuración de fábrica, esta unidad ha memorizado todos los canales, incluidos los que no están disponibles en su localidad. Esta función solo pone automáticamente en memoria los canales disponibles.
ES - 42 - • Los botones sombreados se utilizan para las sigu- ientes operaciones. P ARA EMPEZAR Si es necesario, encienda el amplificador y cualquier otro componente. 1 Presione [PO WER] para encender la unidad. 2 Abra la bandeja del disco manualmente .
- 43 - ES 1 Presione [DISC MENU] . • Aparecerá el menú principal de DVD. • Si esta función no está disponible, el símbo- lo puede aparecer en la pantalla del televisor . • Si el menú de disco está disponible en el disco, aparecerán las opciones de idioma de audio, de subtítulos, capítulos del título y otras para su selección.
Printed in China 1EMN21899 L2550UA ★★★★★ LIMITED W ARRANTY FUNAI CORP . will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURA TION: PA R TS: FUNAI CORP . will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.
An important point after buying a device Sylvania 6615LDG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sylvania 6615LDG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sylvania 6615LDG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sylvania 6615LDG you will learn all the available features of the product, as well as information on its operation. The information that you get Sylvania 6615LDG will certainly help you make a decision on the purchase.
If you already are a holder of Sylvania 6615LDG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sylvania 6615LDG.
However, one of the most important roles played by the user manual is to help in solving problems with Sylvania 6615LDG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sylvania 6615LDG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
