Instruction/ maintenance manual of the product 6309CCB Sylvania
Go to page of 64
9-INCH COLOR TV/VCR 6309CCB O WNER’S MANU AL As an E NERGY S TAR Partner, our company has determined that this product meets the E NERGY S TAR guidelines for energy efficiency.
1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All warnings on the appliance and in the operating instructions should be adhered to.
- 3 - EN 9J27 13.Outdoor Antenna gr ounding- If an outside antenna or cable system is connected to the TV/VCR, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFP A No.
A V OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE - 4 - EN 9J27 PRECAUTIONS LOCA TION For safe operation and satisfactory performance of your TV/VCR, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat.
- 5 - EN 9J27 T ABLE OF CONTENTS A NOTE ABOUT RECYCLING This product’ s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.
- 6 - EN 9J27 FEA TURES • I nfrared remote control • Dew Sensor – Indicates that moisture condensation may occur inside the TV/VCR. • Bilingual on screen menu display selectab le in English or French • Real time counter – This shows the elapsed recording or playback time in hours, minutes, and seconds.
- 7 - EN 9J27 VIDEO CASSETTE This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. REMOVING A CASSETTE 1)In the Stop mode, press the EJECT button on the remote control or press the STOP/EJECT button on the TV/VCR.
- 8 - EN 9J27 OPERA TING CONTROLS AND FUNCTIONS NOTE: • W e do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control. If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit.
- 9 - EN 9J27 - REAR VIEW - 26 27 28 AC 120V ANT DC 13.2V 9 F .FWD button – Press to rapidly advance the tape, or to view the picture rapidly in forward during playback mode.
- 10 - EN 9J27 PREP ARA TION FOR USE ANTENNA/CABLE CONNECTIONS DIPOLE ANTENNA HOOK UP 1. Push the stem of the Dipole Antenna (accessory) into the hole for antenna at the back of TV/VCR. 2. Connect the flat twin-lead cable from the Dipole Antenna to the 300/75 ohm Matching Adapter (accessory).
- 11 - EN 9J27 CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SA TELLITE BOX If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown here. By using this connection you can also record scram- bled channels.
- 12 - EN 9J27 INST ALLING THE BA TTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow . 2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings.
- 13 - EN 9J27 SET UP FOR USE Y ou can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3).
- 14 - EN 9J27 CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/VCR. 1 Select “ CHANNEL SET UP ” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “CHANNEL SET UP”. Then, press the F .
- 15 - EN 9J27 CLOCK SET UP (AUTO / MANUAL) Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow “AUTO CLOCK SET- TING”. If it is not, follow “MANUAL CLOCK SET- TING”.
- 16 - EN 9J27 MANUAL CLOCK SETTING Make sure ... • TV/VCR power must be turned on. In the example below , the clock is to be set to: DA TE May 1st, 2001 SETTING TIME 5:40PM 1 Select “ SETTING CLOCK ” Press the MENU button on the remote control.
- 17 - EN 9J27 ON SCREEN DISPLA Y T o check the Counter, Clock and Channel number on the TV screen, press the DISPLA Y button on the remote control. Each time you press the DISPLA Y button on the remote control, the TV screen will change as fol- lows: • Counter mode: After 5 seconds, only the counter remains.
- 18 - EN 9J27 TV OPERA TION W A TCHING A TV PROGRAM 1 T urn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control.
- 19 - EN 9J27 PLA YBACK NORMAL PLA YBACK Make sure ... • TV/VCR power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the TV/VCR will start playback automatically . 2 T o begin playback Press the PLA Y button.
- 20 - EN 9J27 SPECIAL PLA YBACK This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 Select “ USER ’ S SET UP ” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “USER’S SET UP”.
- 21 - EN 9J27 SEARCH Make sure ... • TV/VCR power must be turned on. • Insert a tape. This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape.
- 22 - EN 9J27 RECORDING Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONL Y record and view the same channel.
- 23 - EN 9J27 This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR. Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.
- 24 - EN 9J27 TIMER Y ou may set the TV/VCR to start and end a record- ing while you are away . Y ou can set 8 programs to record on specific days, daily or weekly within a 1 year period. In the example below , the timer is being set to recor d: DA TE: July 6th, 2001 SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61 T APE SPEED: SP Make sure .
- 25 - EN 9J27 T o shift the time schedule of an automatic timer recording. 1)Press the POWER button. 2)Repeat step [1] on page 24. 3)Press the RECORD button and select the desired program using the PLA Y/ K or STOP/ L button. 4)Press the RECORD button again.
- 26 - EN 9J27 TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the REC indicator goes off. 2)Press the MENU button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the F .FWD/ B button. The details of pro- grams appear on the TV screen.
- 27 - EN 9J27 3 Set wake up time Press the PLA Y/ K or STOP/ L but- ton until to point to “TIME”. Press the F .FWD/ B or REW/ s button until your desired wake up time appears. Each additional push will increase (or decrease) the time by 10 minutes.
- 28 - EN 9J27 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below . Check the corresponding CORRECTIVE ACTION column to remedy the problem.
GENERAL SPECIFICA TIONS CR T : 9 inch in-line gun, 90˚ deflection tube T elevision system : NTSC-M V ideo Heads : Rotary two-head T ape width : 1/2 inch T ape speed SP : 33.
Printed in Malaysia 0EMN01784 T4204CE * * * * * SYLVANIA HOME ENTERTAINMENT WARRANTY We appreciate your purchase of a SYLVANIA Home Entertainment product. We take pride in the quality of our products and have manufactured your new Home Entertainment unit to exacting quality standards.
TÉLÉVISEUR COULEUR/MA GNÉT OSCOPE DE 9 POUCES 6309CCB GUIDE D’UTILISA TION ® ® ® En tant que partenaire de E NERGY S TAR , notre société a conclu que ce produit répond aux normes d'économie énergétique de E NERGY S TAR . E NERGY S TAR est une marque déposée aux Etats Unis.
1.LISEZ LES INSTRUCTIONS- A vant d’utiliser cet appareil, veuillez lire toutes les instructions relatives au fonctionnement et à la sécurité. 2.CONSER VEZ CE GUIDE D’UTILISA TION - Les instructions relatives au fonctionnement et à la sécurité doivent être conservées pour pouvoir les consulter ultérieurement.
- 3 - FR 9J29 14.ORAGES ÉLECTRIQUES- Par mesure de protection supplémentaire du téléviseur/magnétoscope, il est conseillé lors d’orages ou d’une inutilisation prolongée de l’appareil de débrancher le fil d’alimentation du réseau électrique ainsi que le câble de raccordement à l’antenne.
DANGERS D ’É LECTROCUTION ET D ’ INCENDIE - 4 - FR 9J29 PR É CAUTIONS À PRENDRE EMPLACEMENT Afin de s ’ assurer d ’ un fonctionnement sans danger de ce t é l é viseur/magn é toscope et d.
- 5 - FR 9J29 T ABLE DES MA TI È RES REMARQUE CONCERNANT LE RECYCLAGE Les mat é riaux d ’ emballage de ce produit sont recyclables et peuvent ê tre r é utilis é s. V euillez disposer de tout mat é riau conform é ment à vos r è glements de recyclage locaux.
- 6 - FR 9J29 CARACT É RISTIQUES • T élécommande à infrarouge • Détecteur de condensation - Indique ce que la condensation risque d ’ appara î tre à l ’ int é rieur du t é l é viseur/magn é toscope. • C hoix sur l’affichage de l’écran du menu en deux langues: anglais ou français.
- 7 - FR 9J29 VID É OCASSETTES Ce t é l é viseur/magn é toscope effectue la lecture de toutes les vid é ocassette de type . Utilisez des vid é ocassette de bonne qualit é afin d ’ obtenir les meilleurs r é sultats. N ’ utilisez pas des vid é ocassettes ab î m é es ou de mauvaise qualit é .
- 8 - FR 9J29 EMPLACEMENT DES COMMANDES - TÉLÉCOMMANDE - AUDIO VIDEO STOP/EJECT REW PLA Y F.FWD VOLUME CHANNEL EARPHONE REC/OTR POWER REC 1 9 2 3 4 5 6 7 8 12 13 10 11 14 POWER WAKE-UP /SLEEP 12 3 45 6 78 9 +100 0 EJECT CHANNEL RETURN REW PLAY STOP F.
- 9 - FR 9J29 - ARRIÈRE DE L ’APP AREIL - 26 27 28 AC 120V ANT DC 13.2V • Pressez-la pour s é lectionner une des fonctions du menu à l ’é cran. • Pressez-la pour s é lectionner un des param è tres d ’ un menu sp é cifique (par exemple : langue d ’ utilisation ou programmation).
- 10 - FR 9J29 PR É P ARA TION DE L ’ APP AREIL RACCORDEMENTS MONT AGE DE L ’ANTENNE DIPÔLE 1. Enfoncez la tige de l ’ antenne dip ô le (accessoire) dans l ’ orifice pour antenne à l ’ arri è re du t é l é viseur/magn é toscope.
AC 120V ANT DC 13.2V ANT. DC13.2V - 11 - FR 9J29 Antenne automobile combin é e VHF/UHF(non comprise) A la prise de l ’ allume-cigarette du v é hicule C á ble de batterie pour voiture (accessoire .
- 12 - FR 9J29 ENTR É E - SIGNAL EXTERNE Lorsque le signal de t é l é vision provient d ’ une source ext é rieure, vous devez raccorder les c â bles audio/vid é o de la source de ce signal sur les bornes d ’ entr é e audio (AUDIO IN) et vid é o (VIDEO IN) du t é l é viseur/magn é toscope.
- 13 - FR 9J29 1 Branchement du cor don d’alimentation du téléviseur/magnétoscope Fixez l ’ extr é mit é petite du cordon d ’ alimentation fourni au connecteur C.A. de 120 V situ é au dos du t é l é viseur/magn é toscope. Puis, raccordez l ’ autre extr é mit é sur une prise de courant alternatif conventionnelle.
• V ous devez presser l ’ interrupteur d ’ alimentation (POWER) afin de mettre le t é l é viseur/magn é toscope en circuit. REMARQUE: Cette fonction n ’ affecte que le langage sur le menu d ’ affichage mais pas le son de la source audio. 1 Activez la fonction LANGA GE Pressez la commande MENU de la t é l é commande.
- 15 - FR 9J29 R É GLAGE DE L ’ HORLOGE (AUTOMA TIQUEMENT OU MANUELLEMENT) 1 Sélection de la fonction RÉGLADE DE L ’HORLOGE Pressez la commande MENU de la t é l é commande.
3 Sélection du canal diffusant l’heure avec son signal télévisé Pressez plusieurs fois la commande de lecture (PLA Y/ K ) ou d ’ arr ê t (STOP/ L ) jusqu ’à ce que la fl è che pointe les mots CHANG. AUTO HORL. à l ’é cran. Puis pressez plusieurs fois les commandes d ’ avance rapide (F .
- 17 - FR 9J29 AFFICHAGE À L ’É CRAN Lorsque vous souhaitez faire appara î tre le compteur de bande, l ’ heure et le num é ro du canal syntonis é à l ’é cran du t é l é viseur/magn é toscope, pressez la commande d ’ affichage (DISPLA Y) sur la t é l é commande.
- 18 - FR 9J29 CARACT É RISTIQUES SP É CIALES D É MAGN É TISA TION La magn é tisation provenant d ’ appareils se trouvant à proximit é risque d ’ alt é rer les couleurs de l ’ image du t é l é viseur/magn é toscope. Si cela se produisait, é loignez le t é l é viseur/magn é toscope de tels appareils.
- 19 - FR 9J29 TOUCHES REW/ s F .FWD/ B LUMINOSIT É diminue augmente CONTRASTE diminue augmente COULEUR diminue augmente TEINTE plus rouge plus vive NETTET É plus floue plus claire AJUSTEMENT DE L .
• Le t é l é viseur/magn é toscope doit ê tre mis en circuit pour effectuer cette op é ration. 1 Introduisez une vidéocassette contenant déjà un enregistrement Si la languette de protection de la vid é ocassette a é t é bris é e, le t é l é viseur/magn é toscope entamera automatiquement la lecture de la bande.
- 21 - FR 9J29 COMMANDE DE ST ABILIT É VER TICALE Cette commande sert exclusivement à faire cesser le d é placement vertical de l ’ image seulement lorsque le t é l é viseur/magn é toscope se trouve en mode d ’ arr ê t sur image. Pour le faire, pressez les touches des canaux (CH K / L ).
- 22 - FR 9J29 RECHERCHE • V ous devez presser l ’ interrupteur d ’ alimentation (POWER) afin de mettre le t é l é viseur/magn é toscope en circuit pour pouvoir utiliser les fonctions d é crites ci-dessous. • Ins é rez une vid é ocassette dans l ’ appareil.
- 23 - FR 9J29 Pressez la commande MENU de la t é l é commande. Pressez plusieurs fois la commande de lecture (PLA Y/ K ) ou d ’ arr ê t (STOP/ L ) jusqu ’à ce que la fl è che pointe les mots RECH. CHRONOM É TRQUE. Puis pressez la commande d ’ avance rapide (F .
- 24 - FR 9J29 Cette fonction vous permet de programmer la dur é e d ’ un enregistrement d ’ une simple pression de la commande d ’ enregistrement express à une seule touche (REC/OTR) se trouvant sur le t é l é viseur/magn é toscope.
Évitez les chevauchements dans la programmation... Dans certains cas, une programmation ne pourra ê tre enregistr é e s ’ il y a un chevauchement des programmations.
- 26 - FR 9J29 5 S é lectionnez l ’ heure à laquelle l ’ enregistrement doit d é buter Pressez la commande de lecture (PLA Y/ K ) ou d ’ arr ê t (STOP/ L ) à plusieurs reprises jusqu ’à .
10 Quittez le mode de programmation Appuyez sur la touche F .FWD/ B (avance rapide) ou REW/ s (rembobinage). La programmation est maintenant achev é e. • Pour programmer un autre enr egistrement par la minuterie, r é p é tez les directives donn é es aux é tapes 2 à 10.
- 28 - FR 9J29 • Il n ’ est pas n é cessaire de presser la commande d ’ enregistrement (RECORD) pour effectuer un enregistrement par la minuterie. • Les enregistrements par la minuterie commencent automatiquement à l ’ heure pour laquelle ils ont é t é programm é s pour d é buter .
- 29 - FR 9J29 MINUTERIE-SOMMEIL La minuterie-sommeil vous permet de programmer à l ’ avance l ’ heure à laquelle le t é l é viseur/magn é toscope se mettra hors circuit de lui- m ê me sans que vous ayez à presser l ’ interrupteur d ’ alimentation (POWER).
NETTOY AGE DU BOÎTIER EXTÉRIEUR • Essuyez le panneau frontal et les autres surfaces externes avec un tissu doux tremp é dans de l ’ eau ti è de et essorez- le bien. • N ’ utilisez jamais de solvant ou de l ’ alcool. Ne vaporisez pas un insecticide liquide à proximit é de l ’ appareil.
Si vous avez suivi les instructions contenues dans ce manuel et vous é prouvez toujours de la difficult é à faire fonctionner l ’ appareil, consultez la colonne intitul é e "PROBL È MES" puis la ligne correspondante dans la colonne intitul é e "MESURES CORRECTIVES" afin de rem é dier au probl è me.
- 32 - FR 9J29 FICHE TECHNIQUE RENSEIGNEMENTS GÉNÉRAUX T ube image : 9 pouces, canon à rayons align é s tube à parcours é lectronique dirig é à 90 ˚ Syst è me tel é vision : NTS t é l é v.
- 33 - FR 9J29 CORRESPONDANCES DES CANAUX DU C Â BLE Si vous ê tes abonn é à un service de c â blodistribution des stations de t é l é vision, cet appareil vous permettra de recevoir 125 canaux.
GARANTIE D’UN APPAREIL DE DIVERTISSEMENT SYLVANIA Nous vous remercions d’avoir acheté un appareil de divertissement SYLVANIA. Votre nouvel appareil, comme tous ceux de notre production, se conforme à de normes de qualité.
An important point after buying a device Sylvania 6309CCB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sylvania 6309CCB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sylvania 6309CCB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sylvania 6309CCB you will learn all the available features of the product, as well as information on its operation. The information that you get Sylvania 6309CCB will certainly help you make a decision on the purchase.
If you already are a holder of Sylvania 6309CCB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sylvania 6309CCB.
However, one of the most important roles played by the user manual is to help in solving problems with Sylvania 6309CCB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sylvania 6309CCB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
