Instruction/ maintenance manual of the product 2X10C SWR
Go to page of 16
SWR • CORONA, CA • USA W orkingman’s 2X10C OWNER’S MANUAL.
2 • WORKINGMAN’S 2X10C INTRODUCTION Congratulations on your purchase of the W orkingman's 2x1 0C Bass Combo Amplifier! Y ou now own the most powerful combo amp in SWR's world-renowned W orkingman's Line of products, a line designed for bassists who expect typical SWR professional quality at affordable prices.
WORKINGMAN’S 2X10C • 3 WORKINGMAN'S 2X10C - FRONT PANEL FEATURES • Discrete Solid State Front End • Balanced XLR Output • Tuner Out Jack • High and Low Sensitivity 1/4" Input Jac.
4 • WORKINGMAN’S 2X10C Cabinet Construction and Features 5/8" 7-ply , Maple or Birch plywood construction, waterproof glue. All joints Dado and Rabbet, glued and nailed.
WORKINGMAN’S 2X10C • 5 WORKINGMAN'S 2X10C - FRONT PANEL FEATURES BALANCED D.I. (XLR) OUTPUT The Balanced XLR output is a true balanced output. No front panel controls affect its signal. The tone and output levels are controlled only by the instrument plugged into one of the input jacks.
6 • WORKINGMAN’S 2X10C GAIN CONTROL The Gain control adjusts the volume of the preamp section. Since the Gain control is similar to a "pad," a small amount of sign al will be heard even with the Gain control rotated fully counter-clockwise ("MIN") if the Master V olume is up.
WORKINGMAN’S 2X10C • 7 WORKINGMAN'S 2X10C - 5-BAND GRAPHIC EQ SECTION OVERVIEW Y our W orkingman's 2x1 0C comes equipped with a 5-band graphic equalizer for versatile, active tone shaping in an easy-to-use int er- face.
8 • WORKINGMAN’S 2X10C EFFECTS BLEND CONTROL The Effects Blend Control "blends" the signal sent from your instrument with the signal coming from an outboard effects unit of your choice. With the Effects Blend fully counter-clockwise ("DRY"), no signal from your outboard effects unit will be heard.
WORKINGMAN’S 2X10C • 9 MASTER (VOLUME) CONTROL The Master (meaning "Master V olume") control adjusts the level being sent to the power amplifier in your W orkingman's 2x1 0C − it controls the overall volume of the unit.
10 • WORKINGMAN’S 2X10C WORKINGMAN'S 2X10C - REAR PANEL FEATURES (chassis and cabinet) EFFECTS LOOP (for outboar d ef fects devices) As mentioned previously in the "Effects Blend Control.
WORKINGMAN’S 2X10C • 11 NOTE : Inserting a plug into the Effects Receive jack activates the Effects Blend control. The control receives this command through the ground created by the phone plug making contact with the jack. The plug must be a mono plug (tip and ground).
12 • WORKINGMAN’S 2X10C section of the W orkingman's 2x1 0C may occur if speaker enclosures with total impedances less than the minimum loads listed above are connected to the speaker output section. The owner's manual that came with your speaker cabinet should state its tota l impedance.
WORKINGMAN’S 2X10C • 13 NOTE : The frequency response of the Workingman's 2x10C is far greater than usually found in musical instrument amplifiers (20 Hz to 40K Hz). This was engineered in order to give the bass player the same punch and clarity on stage as found in the studio or concert P.
14 • WORKINGMAN’S 2X10C TWEETER MODE SWITCH Also located on the small panel on the rear of the W orkingman's 2x1 0C's speaker cabinet, this three-position switch gives you three different options for operation of the piezo tweeter .
WORKINGMAN’S 2X10C • 15.
WORKINGMAN’S 2X10C LIMITED WARRANTY The WORKINGMAN’S 2X10C from SWR is war ranted to the original consumer pur chaser for ONE YEAR fr om the date of pur chase against defects in materials and workmanship, provided that it is pur chased fr om an Authorized SWR dealer .
An important point after buying a device SWR 2X10C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SWR 2X10C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SWR 2X10C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SWR 2X10C you will learn all the available features of the product, as well as information on its operation. The information that you get SWR 2X10C will certainly help you make a decision on the purchase.
If you already are a holder of SWR 2X10C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SWR 2X10C.
However, one of the most important roles played by the user manual is to help in solving problems with SWR 2X10C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SWR 2X10C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
