Instruction/ maintenance manual of the product QWS48A-30 Bard
Go to page of 10
Manual 2100-319F Page 1 of 10 © Copyright 2003 Manual No.: 2100-319F Supersedes: 21 10-319E File: V ol. II T ab 14 Date: 1 1-07-05 Bard Manufacturing Company Bryan, Ohio 43506 Since 1914 .
Manual 2100-319F Page 2 of 10 CONTENTS Getting Other Information and Publications 3 QT EC W all Sleeve General Information Shipping Damage .................................................. 4 General ...................................................
Manual 2100-319F Page 3 of 10 Getting Other Information and Publications These publications can help you install the air conditioner or heat pump. You can usually find these at your local library or purchase them directly from the publisher. Be sure to consult current edition of each standard.
Manual 2100-319F Page 4 of 10 SHIPPING DAMAGE Upon receipt of equipment, the carton should be checked for external signs of shipping damage. If damage is found, the receiving party must contact the last carrier immediately, preferably in writing requesting inspection by the carrier’s agent.
Manual 2100-319F Page 5 of 10 FIGURE 3 APPLICATION OF SEALANT TO FLANGES FIGURE 2 APPLICATION OF SEALANT TO 2 X 6 PLATE FRONT VIEW SLEEVE OPENING TREA TED 2 X 6 BOTT OM SUPPORT AND SEAL PLA TE APPL Y CONSTRUCTION ADHESIVE TO SEAL. APPL Y CONSTRUCTION ADHESIVE T O SEAL.
Manual 2100-319F Page 6 of 10 The sleeve is then reinserted into the prepared opening from the outside of the building. All of the mounting flanges must contact the exterior wall. Check to see that there is enough sealant to make this joint watertight.
Manual 2100-319F Page 7 of 10 FIGURE 5 TYPICAL INSTALLATION WITH 14" MAX. WALL THICKNESS sealant must be applied as required. The sleeve must be anchored to the wall. All four mounting flanges must be fastened with two fasteners each to the outside wall.
Manual 2100-319F Page 8 of 10 INSTALLATION WITH 16" THICK WALLS When an application is required on a building with 16" wall, a Wall Sleeve model number QWS48A-16 is required. The installation of the QWS48A-16 is similar to the QWS48A with one exception.
Manual 2100-319F Page 9 of 10 FIGURE 7 QCDS48 CONDENSATE DISPOSAL SYSTEM ACCESSORY ITEM The QCDS48 is a condensate disposal system for use on all QT EC models. The system consists of a drain box and a rear drain assembly. The drain attaches to the side of the sleeve.
Manual 2100-319F Page 10 of 10 ATTATCH BASE ASSEMBLY TO SLEEVE MIS-1848 SEAL BETWEEN SLEEVE & BRACKET WITH SEALANT AS SHOWN SEAL CORNER OF BRACKET WITH SEALANT AS SHOWN FIGURE 8 ATTACHING BASE ASS.
An important point after buying a device Bard QWS48A-30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bard QWS48A-30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bard QWS48A-30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bard QWS48A-30 you will learn all the available features of the product, as well as information on its operation. The information that you get Bard QWS48A-30 will certainly help you make a decision on the purchase.
If you already are a holder of Bard QWS48A-30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bard QWS48A-30.
However, one of the most important roles played by the user manual is to help in solving problems with Bard QWS48A-30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bard QWS48A-30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
