Instruction/ maintenance manual of the product SW351-CAC Swann
Go to page of 8
1 MCAC170510E SW351-CAC www .swannsecurity .com Operating Instructions Ceiling Alarm SW351-CAC ™ ™ Advanced security made easy.
2 2 2 About the PIR Unit PIR Alarm Unit Mounting bracket Mounting Hardwar e Remote Control Operating Instructions 2 Contents About the PIR Unit 2 IMPORT ANT - Read Before Installing 3 Detection Area 4.
3 3 Do not • expose any part of the alarm unit to any sudden shocks (such as being dropped or struck). Do not • install the passive infrar ed (PIR) alarm unit within detection range of any d.
4 4 4 Detection Area Detection Area: The PIR sensor has a 360 degree detection field horizontally , and slightly more than 100 degrees vertically . The diagram below shows an average detection patter n under typical circumstances. The effective detection ar ea does depend on the height of the ceiling that the alarm unit is mounted on.
5 Installation Instructions Mounting T o mount the PIR alarm unit, you’ll need the following tools: A screwdriver • A drill (for hardwood or masonry) • The PIR alarm unit should be mounted on a ceiling between 6ft/2m and 9ft/3m high for maximum coverage and reliability .
6 6 6 Operating the Ceiling PIR Unit Alarm / Chime Mode The switch to select the mode the sensor operates in can be found on the side of the r emote control, as shown to the left. Alarm Mode: When the sensor detects movement whilst the unit is in alarm mode, it will not activate immediately .
7 Low Battery Indicator When the batteries in the alarm unit ar e running out, the LED on the front of the alarm unit will flash slowly (more slowly than during the arming delay). If the LED starts flashing in this way , change the batteries immediately .
8 8 8 © Swann Communications 2010 Advanced security made easy™ W arranty Information Helpdesk / T echnical Support Details Swann T echnical Support All Countries E-mail: tech@swannsecurity .
An important point after buying a device Swann SW351-CAC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Swann SW351-CAC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Swann SW351-CAC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Swann SW351-CAC you will learn all the available features of the product, as well as information on its operation. The information that you get Swann SW351-CAC will certainly help you make a decision on the purchase.
If you already are a holder of Swann SW351-CAC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Swann SW351-CAC.
However, one of the most important roles played by the user manual is to help in solving problems with Swann SW351-CAC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Swann SW351-CAC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
