Instruction/ maintenance manual of the product 500 Swann
Go to page of 9
IP ConnectCam™ 500 Quick Installation Guide www.swannsecurity.com.
-1- 1 Getting Started Package Contents Check the items contained in the package carefully. You should have the following items. Once any item contain ed is damaged or missing, contact the authorized dealer of your locale.
2 Setting Up the Camera Installing the Camera Stand The camera comes with a camera stand, which uses a swivel ball screw head to lock to the camera ’s scre w hole. Wh en the camera stand is attached, you can place th e camera anywhere by mounting the camera through the three screw holes located in the base of the camera stand.
Connecting the Camera to LAN Use the provided Ethernet cable to connect the camera to your local area network (LAN). When you connect the AC power ad apter, the camera is powered on automatically. You can verify the po wer status from th e Power LED on the front panel of the camera.
Connecting the Camera to WLAN If you use a wireless network in yo ur application environment, you need to attach the included ex ternal antenna to the camera. When the camera is powered on, th e camera will automatically search any access point with “default” SSID.
3 Accessing the Camera Using IPFinder 1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate th e Auto-Run program. 2. Click the IPFinder item to launch the utility. The control panel will appear as below. Display the connected camera(s).
click Install Software then select IPFinder on the Auto-R un screen. Accessing to the Camera 1. Open the Web browser o n your co mputer (for example, Microsoft Internet Explorer in this guide) 2. Type the default IP address ( 192. 168.0.30 ) or the IP address found by IPFinder in the Address ba r, and then press [Enter].
4. Click Setup and then Smart Wizard to set up your camera quickly. The Smart Wizard will guide you through the necessary settings with detailed instructions on each step.
-8- 4 Tips For more informat ion, please refer to the Advanced Installation Guide on the provided Installation CD-ROM. For details of operating Ultr aView, please refer to the Software User Guide on the provided Installation CD-ROM. If you have any problem on the prod uct(s), please contact your local authorized dealer.
An important point after buying a device Swann 500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Swann 500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Swann 500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Swann 500 you will learn all the available features of the product, as well as information on its operation. The information that you get Swann 500 will certainly help you make a decision on the purchase.
If you already are a holder of Swann 500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Swann 500.
However, one of the most important roles played by the user manual is to help in solving problems with Swann 500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Swann 500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
