Instruction/ maintenance manual of the product Ambit HR Suunto
Go to page of 120
SU UN TO AMBI T 2 . 5 USER GUIDE en.
1 SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.3.2 Adding point of interest (POI) coordinates manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 8.3.3 Navigating to a point of interest (POI) . . . . . . . . . . . . . . . 36 8.3.4 Deleting a point of interest (POI) .
11.3 Countdown timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 12 Using exercise modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 12.
15 Pairing POD/heart rate belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 15.1 Calibrating PODs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 16 Icons .
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 6.
1 SAFETY Types of safety precautions WARNING: - is used in connection with a procedure or situation that may result in serious injury or death. CAUTION: - is used in connection with a procedure or situation that will result in damage to the product. NOTE: - is used to emphasize important information.
WARNING: DO NOT ENTIRELY RELY ON THE GPS OR BATTERY LIFETIME, ALWAYS USE MAPS AND OTHER BACKUP MATERIAL TO ENSURE YOUR SAFETY. CAUTION: DO NOT APPLY SOLVENT OF ANY KIND TO THE PRODUCT, AS IT MAY DAMAGE THE SURFACE. CAUTION: DO NOT APPLY INSECT REPELLENT ON THE PRODUCT, AS IT MAY DAMAGE THE SURFACE.
2 WELCOME You could call it a watch, but that hardly seems fair. Altitude, navigation, speed, heart rate, weather conditions – it ’ s all at your fingertips. Personalize your device, selecting just what you need to get the most out of your next adventure.
3 DISPLAY ICONS AND SEGMENTS For a complete list of icons in Suunto Ambit, see Chapter 16 Icons on page 100 . 10.
4 USING BUTTONS Suunto Ambit has five buttons which allow you to access all the features. [Start Stop]: ● access the start menu ● pause or resume an exercise or stopwatch ● keep pressed to stop .
[View]: ● change views in TIME mode and during exercise ● keep pressed to invert the display from light to dark and vice versa [Back Lap]: ● return to the previous step ● add a lap during exer.
13 en.
5 GETTING STARTED Start by charging the battery. Your Suunto Ambit wakes up automatically when you attach it to your computer using the supplied USB cable. The device can also be woken up by attaching it to a mains socket using the optional Suunto wall charger.
6 CUSTOMIZING YOUR SUUNTO AMBIT 6.1 Connecting to Movescount Movescount.com is your free personal diary and online sports community that offers you a rich set of tools to manage your daily activities and create engaging stories about your experiences.
NOTE: Moveslink is compatible with PC (Windows XP, Windows Vista, Windows 7) and Mac (Intel-based, running OS X version 10.6 or later). To register to Movescount: 1.
To update your Suunto Ambit software: 1. Go to www.movescount.com/moveslink and install the Moveslink application. 2. Connect your Suunto Ambit to your computer with the Suunto USB cable. The Moveslink application will automatically check for software updates.
6.4 Suunto Apps Suunto Apps allow you to further customize your Suunto Ambit. Visit Suunto App Zone in Movescount to find Apps, such as various timers and counters, available for your use. If you cannot find what you need, create your own App with Suunto App Designer.
TIP: You can also invert the display of your Suunto Ambit by keeping [View] pressed. 6.6 Adjusting display contrast You can increase or decrease the display contrast of your Suunto Ambit. To adjust the display contrast in the settings: 1. Keep [Next] pressed to enter the options menu.
20.
7 USING TIME MODE TIME mode includes time measurement functions. TIME mode shows you the following information: ● top row: date ● middle row: time ● bottom row: toggle between weekday, seconds, dual time and battery level with [View]. 7.1 Changing time settings To access the time settings: 1.
Setting time The current time is shown in the middle row of the TIME mode display. To set the time: 1. In the options menu, go to GENERAL , then to Time/date and Time . 2. Change the hour and minute values with [Start Stop] and [Light Lock]. Accept with [Next].
To set the date: 1. In the options menu, go to GENERAL , then to Time/date and Date . 2. Change the year, month and day values with [Start Stop] and [Light Lock]. Accept with [Next]. 3. Go back to the settings with [Back Lap], or keep [Next] pressed to exit the options menu.
Setting alarm You can use your Suunto Ambit as an alarm clock. To access the alarm clock and set the alarm: 1. In the options menu, go to GENERAL , then to Time/date and Alarm . 2. Set the alarm on or off with [Start Stop] or [Light Lock]. Accept with [Next].
When the alarm sounds, you can: ● Select Snooze by pressing [Light Lock]. The alarm stops and restarts every 5 minutes until you stop it. You can snooze up to 12 times for a total of 1 hour. ● Select Stop by pressing [Start Stop]. The alarm stops and restarts the same time the following day, unless you switch the alarm off in the settings.
NOTE: GPS timekeeping corrects the time accurately, if it is less than 7.5 minutes wrong. If the time is wrong more than that, GPS timekeeping corrects it to the closest 15 minutes. To activate GPS timekeeping: 1. Keep [Next] pressed to enter the options menu.
8 NAVIGATION 8.1 Using GPS Suunto Ambit uses Global Positioning System (GPS) in determining your current position. GPS incorporates a set of satellites that orbit the Earth at an altitude of 20,000 km at the speed of 4 km/s. The built-in GPS receiver in Suunto Ambit is optimized for wrist use and receives data from a very wide angle.
NOTE: When you activate GPS for the first time, or have not used it for a long time, it might take longer than usual to get a GPS fix. Subsequent GPS starts will take less time. TIP: To minimize GPS initiation time, hold the device steady with GPS facing up and make sure you are in an open area so that the device has a clear view of the sky.
You can select the format from the following grids: ● latitude/longitude is the most commonly used grid and has three different formats: ○ WGS84 Hd.d° ○ WGS84 Hd°m.m' ○ WGS84 Hd°m's.s ● UTM (Universal Transverse Mercator) gives a two-dimensional horizontal position presentation.
8.2 Checking your location Suunto Ambit allows you to check the coordinates of your current location using GPS. To check your location: 1. Press [Start Stop] to enter the start menu. 2. Scroll to LOCATION using [Start Stop] and enter with [Next]. 3. The device starts searching for a GPS signal and displays GPS found after acquiring the signal.
You can store up to 100 POIs in the device. Note that also routes take up this quota. For example, if you have a route with 60 waypoints, you can additionally store 40 POIs in the device. You can select a POI type (icon) and POI name from a pre-defined list, or freely name the POIs in Movescount.
TIP: You can also add POIs by selecting NAVIGATION in the start menu. 32.
TIP: You can create POIs in Movescount by selecting a location on a map or inserting the coordinates. POIs in your Suunto Ambit and in Movescount are always synchronized when you connect the device to Movescount.
TIP: When scrolling the menu options, you can increase the speed by keeping [Start Stop] or [Light Lock] pressed until the options start to scroll faster.
35 en.
8.3.3 Navigating to a point of interest (POI) Suunto Ambit includes GPS navigation which allows you to navigate to a pre-defined destination stored as a POI. NOTE: You can also navigate when you are recording an exercise, see Section 12.6.6 Navigating during exercise on page 79.
● your distance from the destination ● the name of the POI you are headed towards, your deviation from the heading in degrees (0° is the correct heading), or alternatively your current heading in cardinal ( N , S , W , E ) and half-cardinal ( NE , NW , SE , SW ) points.
38.
NOTE: Navigation shows the deviation from the north arrow of the watch bezel in low speeds (<4 km/h) and the deviation from course direction in high speeds (>4 km/h). When standing still, you can rotate the device until you see 0 indicating the correct direction.
40.
NOTE: When you delete a POI in Movescount and synchronize your Suunto Ambit, the POI is deleted from the device but only disabled in Movescount. 8.4 Route navigation 8.4.1 Adding a route You can create a route in Movescount, or import a route created with another device from your computer to Movescount.
8.4.2 Navigating a route You can navigate a route you have dowloaded to your Suunto Ambit from Movescount, see Section 8.4.1 Adding a route on page 41 . NOTE: You can also navigate when you are recording an exercise, see Section 12.6.6 Navigating during exercise on page 79.
6. Press [Next] to select Navigate . 7. If you selected a waypoint in the middle of the route, Suunto Ambit prompts you to select the direction of the navigation.
44.
45 en.
To skip a waypoint on a route: 1. While you are navigating a route, keep [Next] pressed to access the options menu. 2. Press [Next] to select NAVIGATION . 3. Scroll to Skip waypoint with [Start Stop] and select with [Next]. The device skips the waypoint and starts navigating directly to the next waypoint on the route.
Full track view The full track view shows you the following information: ● (1) arrow indicating your location and pointing to the direction of your heading. ● (2) the next waypoint on the route ● (3) the first and last waypoint on the route ● (4) POIs that are located close to the route.
NOTE: In the full track view the north is always upwards. Waypoint navigation view The waypoint navigation view shows you the following information: ● (1) arrow pointing to the direction of the next waypoint (turn left/right indicator) ● (2) your distance to the next waypoint ● (3) the next waypoint you are headed towards 8.
9 USING ALTI & BARO MODE In ALTI & BARO mode you can view the current altitude or barometric pressure. It offers three profiles: Automatic , Barometer and Altimeter . For information on setting profiles, see Section 9.2.1 Setting profiles on page 52 .
9.1.1 Getting correct readings If you are engaged in an outdoor activity that requires accurate sea level air pressure or altitude, you will first need to calibrate your Suunto Ambit by entering either your current altitude or the current sea level air pressure.
ALTIMETER profile + altitude moving + weather change If your Altimeter profile is on and the weather changes frequently while you climb in altitude or go down in altitude, the device will give you incorrect readings.
To get correct readings, you need to match the profile to your activity. You can either let Suunto Ambit decide a suitable profile for the activity, or choose a profile yourself. NOTE: You can define the profile as part of the custom mode settings in Movescount, or in your Suunto Ambit.
3. Scroll to Reference with [Light Lock] and enter with [Next]. 4. Scroll to Altitude or Sea level with [Light Lock] and enter the setting with [Next]. 5. Set the known reference value using [Start Stop] and [Light Lock]. 9.3 Using Altimeter profile The Altimeter profile calculates altitude based on reference values.
NOTE: If you are wearing your Suunto Ambit on your wrist, you will need to take it off in order to get an accurate temperature reading because your body temperature will affect the initial reading. 9.4 Using Barometer profile The Barometer profile shows the current sea level air pressure.
● middle row: a graph displaying sea level pressure data from the past 27 hours (1h recording interval) ● bottom row: toggle between temperature, time and altitude reference value with [View] Altitude reference is the latest altitude used in ALTI & BARO mode.
It is not possible to measure weather and altitude changes at the same time, as both cause a change in the surrounding air pressure. Suunto Ambit senses vertical movement and switches to measuring altitude, when needed. When altitude is shown, it is updated with a maximum delay of 10 seconds.
10 USING 3D COMPASS Suunto Ambit has a 3D compass that allows you to orient yourself in relation to magnetic north. The tilt-compensated compass gives you accurate readings even if the compass is not horizontally level.
NOTE: Calibrating the 3D compass requires two actions, horizontal rotation and vertical tilt. Be sure to read all the instructions before starting the calibration. To access the compass calibration: 1. Keep [Next] pressed to enter the options menu. 2.
10.2 Setting declination value To ensure correct compass readings, set an accurate declination value. Paper maps point to true north. Compasses, however, point to magnetic north – a region above the Earth where the Earth ’ s magnetic fields pull.
5. Turn the declination off by selecting -- , or select W (west) or E (east). 6. Set the declination value with [Start Stop] or [Light Lock]. 7. Press [Next] to accept the setting.
11 TIMERS 11.1 Activating and deactivating stopwatch The stopwatch allows you to measure time without starting an exercise. After you have activated the stopwatch, it is shown as the last display after the TIME , ALTI & BARO and COMPASS modes. To activate/deactivate the stopwatch: 1.
11.2 Using stopwatch To use the stopwatch: 1. In the activated stopwatch display, press [Start Stop] to start measuring time. 2. Press [Back Lap] to make a lap, or press [Start Stop] to pause the stopwatch. To view the lap times, press [Back Lap] when the stopwatch is paused.
While the stopwatch is running, you can: ● press [View] to switch between the time and lap time shown on the bottom row of the display. ● scroll the TIME , ALTI & BARO and COMPASS modes with [Next]. ● enter the options menu by keeping [Next] pressed.
The timer makes a short sound every second during the last 10 seconds and sounds an alarm when zero is reached. To set the countdown time: 1. Press [Start Stop] to enter the start menu. 2. Scroll to TIMERS with [Light Lock] and select with [Next]. 3. Scroll to Countdown with [Light Lock] and select with [Next].
After the countdown has stopped, the countdown timer display disappears after a 2 minute timeout period. To deactivate the timer, go to TIMERS in the start menu and select END Timer . TIP: You can pause/continue the countdown by pressing [Start Stop].
12 USING EXERCISE MODES Use the exercise modes to record exercise logs and view various information during your exercise. You can access the exercise modes by pressing [Start Stop] in the TIME or ALTI & BARO mode, or in the COMPASS mode after the compass has been calibrated.
During exercise the predefined exercise modes give you information that is useful for that particular sport: ● Cycling : speed, distance, cadence and heart rate related information ● Mountaineerin.
○ Select COMPASS OFF/ON to activate/deactivate the compass. When the compass is activated during exercise, it is shown as the last display of the custom exercise mode. ○ Select HR LIMITS OFF/ON to set the HR limits on or off. The heart rate limit values can be specified in Movescount.
Using a heart rate belt enables the following additional information after exercise: ● calories burned during exercise ● average heart rate ● peak heart rate ● recovery time Troubleshooting: N.
WARNING: People who have a pacemaker, defibrillator, or other implanted electronic device use the hear rate belt at their own risk. Before starting the initial use of the heart rate belt, we recommend an exercise test under a doctor ’ s supervision.
TIP: Machine-wash the heart rate belt regularly after use to avoid unpleasant odor and to ensure good data quality and functionality. Only wash the textile strap. 12.5 Starting exercise To start exercising: 1. Moisten the contact areas and put on the heart rate belt (optional).
72.
12.6 During exercise Suunto Ambit gives you additional information during your exercise. The additional information varies depending on the exercise mode you have selected, see Section 12.1 Exercise modes on page 66 . You will also get more information, if you use a heart rate belt and GPS during exercise.
automatically, Suunto Ambit records the laps based on the distance you have specified in Movescount. To make laps manually, press [Back Lap] during the exercise.
To record altitude: 1. Make sure that the Altimeter profile is activated. 2. Press [Start Stop] to enter the start menu. 3. Scroll to EXERCISE with [Start Stop] or [Light Lock] and select with [Next]. 4. Scroll the exercise modes with [Start Stop] or [Light Lock] and select a suitable mode with [Next].
76.
12.6.4 Using compass during exercise You can activate the compass and add it to a custom exercise mode during your exercise. To use the compass during exercise: 1. While you are recording your exercise, keep [Next] pressed to access the options menu. 2.
To deactivate the compass, go back to the options menu and set the compass off. 12.6.5 Using interval timer You can add an interval timer to each custom exercise mode in Movescount. To add the interval timer to a custom mode, go to the GEAR section of your profile and select Customization .
12.6.6 Navigating during exercise You can navigate a route or navigate to a point of interest (POI) during your exercise. To navigate during exercise: 1. While you are recording your exercise, keep [Next] pressed to access the options menu. 2. Press [Next] to select NAVIGATION .
To deactivate navigation: 1. Keep [Next] pressed to access the options menu. 2. Press [Next] to select NAVIGATION . 3. Scroll to End navigation with [Start Stop] and accept with [Next]. 12.6.7 Finding back during exercise Suunto Ambit automatically saves the starting point of your exercise, if you are using GPS.
To find back to the starting point during exercise: 1. While you are recording your exercise, keep [Next] pressed to access the options menu. 2. Press [Next] to select NAVIGATION . 3. Scroll to Find back with [Start Stop] and select with [Next]. The navigation guidance is shown as the last display on the custom exercise mode.
12.6.8 Autopause Autopause pauses the recording of your exercise when your speed is less than 2 km/h. When your speed increases to more than 2km/h, the recording continues automatically. You can set autopause to on/off for each sport mode in Movescount.
12.7 Viewing logbook after exercise You can view the summary of your exercise after you have stopped recording. To stop recording and view the summary information: 1. Keep [Start Stop] pressed to stop and save the exercise. Alternatively, you can press [Start Stop] to pause the recording.
You can also view the summaries of all your saved exercises in the logbook. In the logbook the exercises are listed according to time and the latest exercise is shown first. The logbook can store approximately 15 hours of exercises with 1 second ’ s GPS fix and data collection interval.
12.7.1 After exercise with heart rate belt When you use a heart rate belt during exercise, the summary includes the following information: ● start time and date of the log ● duration ● number of.
● average speed (exercise with GPS) ● descent 12.7.3 Recovery time Suunto Ambit always shows your current cumulative recovery time from all your saved exercises. The recovery time indicates how long it takes for you to fully recover and be ready to exercise with full intensity.
13 FUSEDSPEED FusedSpeed TM is a unique combination of GPS and wrist acceleration sensor readings for measuring your running speed more accurately. GPS signal is adaptively filtered based on wrist acceleration, giving more accurate readings at steady running speeds and a quicker response to changes in speed.
NOTE: FusedSpeed TM is meant for running and other similar type of activities. TIP: To get the most accurate readings with FusedSpeed TM , only glance shortly at the device when needed. Holding the device in front of you without moving it reduces the accuracy.
● floorball ● football The other exercise modes use the basic GPS speed data. Use example: Running and biking with FusedSpeed TM When you change from running to biking, FusedSpeed TM notices that the wrist acceleration is not giving valid speed readings.
14 ADJUSTING SETTINGS To access and adjust the settings: 1. Keep [Next] pressed to enter the options menu. 2. Scroll the menu with [Start Stop] and [Light Lock]. 3. Press [Next] to enter a setting. 4. Press [Start Stop] and [Light Lock] to adjust the setting values.
○ Metric ○ Imperial ○ Advanced : Allows you to customize a mix of imperial and metric settings according to your own liking in Movescount. ● Position format : ○ WGS84 Hd.
Tones/display ● Invert display : inverts the display ● Tones : ○ All on : button tones and system tones are activated ○ Buttons Off : only system tones are activated ○ All off : all tones are off NOTE: The alarm will sound even when all tones are off.
○ Heading up : Displays the zoomed-in map with the heading pointing up. ○ North up : Displays the zoomed-in map with the north pointing up. ALTI-BARO settings ● Profile : altimeter, barometer, automatic ● Reference : altitude, sea level PAIR settings ● Bike POD : Pair a Bike POD.
● TEST : ○ LCD test : allows you to test that the LCD works properly. ● ACTION : ○ GPS reset : allows you to reset GPS. NOTE: Resetting GPS resets GPS data, compass calibration values, alti/baro graphs and recovery time. However, your recorded logs will not be removed.
15 PAIRING POD/HEART RATE BELT Pair your Suunto Ambit with optional Suunto PODs (Bike POD, heart rate belt, Foot POD or Cadence POD) and ANT+ PODs to receive additional speed, distance and cadence information during exercise. You can pair up to four different PODs (one of each POD type).
96.
TIP: You can also activate the heart rate belt by moistening and pressing both electrode contact areas. Troubleshooting: Heart rate belt pairing fails If the heart rate belt pairing fails, try the following: ● Check that the strap is connected to the module.
15.1 Calibrating PODs You can use your Suunto Ambit to calibrate Suunto Foot POD Mini for accurate speed and distance measurement. Perform the calibration on an accurately measured distance, for instance, on a 400 meter running track. To calibrate Suunto Foot POD Mini with Suunto Ambit: 1.
To calibrate Suunto Bike POD in Movescount, set the bike tire circumference in Movescount. Movescount calculates a calibration factor. The default calibration factor is 1.
16 ICONS For example the following icons are displayed in Suunto Ambit: barometer altimeter chronograph settings GPS signal strength pairing heart rate exercise mode alarm interval timer 100.
button lock battery current screen button indicators up/increase next/confirm down/decrease POI icons The following POI icons are available in Suunto Ambit: building/home car/parking camp/camping 101 .
food/restaurant/cafe lodging/hostel/hotel water/river/lake/coast mountain/hill/valley/cliff forest crossroad sight begin end geocache waypoint 102.
road/trail rock meadow cave 103 en.
17 TERMINOLOGY With AUTOLAP , you can define laps in distance instead of time. Autolap The way in which the GPS receiver's position will be displayed on the wrist unit. Commonly displayed as latitude/longitude in degrees and minutes, with options for degrees, minutes and seconds, degrees only, or one of several grid formats.
Travelling to a given waypoint with knowledge of the current position in relation to the waypoint. Navigation Peak Training Effect is a parameter that indicates the impact of a training session on your maximal aerobic performance (VO 2 max). Go to Movescount to select it to be displayed during your exercise.
Suunto App Designer is an easy-to-use graphical tool that gives everyone the possibility to create new features. Registration to Movescount is required. You can find Suunto App Designer in Movescount. Suunto App Designer You can find existing Suunto Apps in Suunto App Zone in Movescount.
18 CARE AND MAINTENANCE Handle the unit with care – do not knock or drop it. Under normal circumstances the device will not require servicing. After use, rinse it with fresh water, mild soap, and carefully clean the housing with a moist soft cloth or chamois.
NOTE: Water resistance is not equivalent to functional operating depth. The water resistance marking refers to static air/water tightness withstanding shower, bathing, swimming, poolside diving and snorkeling. To maintain water resistance, it is recommended to: ● never push the buttons while submerged.
NOTE: In case of abnormal capacity decrease due to defective battery, Suunto warranty covers the battery replacement for 1 year or for at maximum 300 charging times, whichever comes first. TIP: If the device is taking GPS fix each second, the charge lasts at least ~15 hours.
18.3 Replacing HR belt battery Replace the battery as illustrated here: 110.
19 TECHNICAL SPECIFICATIONS General ● operating temperature: -20° C to +60° C/-5° F to +140° F ● battery charging temperature: 0° C to +35° C/+32° F to +95° F ● storage temperature: -30° C to +60° C/-22° F to +140° F ● weight: ~78 g/~2.
Barometer ● display range: 950...1060 hPa/28.34...31.30 inHg ● resolution: 1 hPa/0.01 inHg Altimeter ● display range: -500 m...9000 m/-1500 ft...
19.2 FCC compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
registered or unregistered trademarks of Suunto Oy. This document and its contents are proprietary to Suunto Oy and are intended solely for the use of clients to obtain knowledge and information regarding the operation of Suunto products.
Warranty Period The Limited Warranty Period starts at the date of original retail purchase. The Warranty Period is two (2) years for display devices. The Warranty Period is one (1) year for accessories including but not limited to PODs and heart rate transmitters, as well as for all consumable parts.
Suunto does not warrant that the operation of the Product will be uninterrupted or error free, or that the Product will work with any hardware or software provided by a third party. Access to Suunto warranty service You must have proof of purchase to access Suunto warranty service.
Index A adjusting display contrast, 19 after exercise, 83, 85 with heart rate belt, 85 without heart rate belt, 85 alarm, 24 Alti & Baro mode, 49 Altimeter profile, 53 Automatic profile, 55 Barome.
E exercise mode after exercise, 83 during exercise, 73 starting exercise, 71 Exercise mode after exercise, 85 exercise modes, 17, 66 additional options, 67 F finding back, 80 FusedSpeed, 87 G GPS, 27 .
POD pairing, 95 POI icons, 101 point of interest (POI) adding coordinates manually, 33 adding current location, 30 deleting, 39 navigating, 36 position formats, 28 R recording altitude, 74 recording t.
© Su unt o O y 0 6 / 2013 Su unt o is a r eg is t er ed t rad e ma rk of S uu nt o Oy. All R ig ht s re s er v e d. SUUNTO CUSTOMER SUPPORT 1. www.suunto.
An important point after buying a device Suunto Ambit HR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Suunto Ambit HR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Suunto Ambit HR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Suunto Ambit HR you will learn all the available features of the product, as well as information on its operation. The information that you get Suunto Ambit HR will certainly help you make a decision on the purchase.
If you already are a holder of Suunto Ambit HR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Suunto Ambit HR.
However, one of the most important roles played by the user manual is to help in solving problems with Suunto Ambit HR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Suunto Ambit HR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
