Instruction/ maintenance manual of the product NEC004-TD Superior
Go to page of 20
1 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. HOMEOWNER'S CARE AND OPERA TION INSTRUCTIONS 33" DIRECT-VENT GAS FIREPLACE HEATERS P/N 725,023M REV.
2 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. These appliances are designed to operate on natural or propane gas only. On Millivolt models the Input of the appliance can be varied from 13,500 to 17,500 BTU/HR. On Electronic models the input is fixed at 17,500 BTU/HR.
3 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Figure 1 Millivolt Appliances - To light millivolt appliances refer to the detailed lighting instructions found in both English and French on pages 12 and 13 of these instruc- tions respectively.
4 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. CAUTION: DO NOT ATTEMPT TO TOUCH THE FRONT ENCLOSURE GLASS WITH YOUR HANDS WHILE THE FIREPLACE IS IN USE. Variable Flame Height Adjustment ( Millivolt Appliances only) 1. All Millivolt appliances are equipped with a variable gas control valve.
5 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Periodically (After the Burning Season) Maintenance Task Accomplishing Person Procedure Cleaning Firebox Interior Check Flame Patterns and Flame Heig.
6 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Refer to Figure 5 and remove the front glass enclosure panel as follows : 1. Remove the top louver or radiant panel. 2. Open the hinged drop-down control com- partment panel. Flame Appearance and Sooting Proper flame appearance is a matter of taste.
7 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Log Placement Figure 8 3 . Insert the alignment hole of the left twig over the front log's left pin. Rotate the left twig until it just touches the edge of the ember bed bracket. 4 . Insert the alignment hole of the right twig over the front log's right pin.
8 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Electronic Appliance Checkout To light the burner, turn ‘ON’ the optional remote wall switch and turn the gas control switch to the “ON” position. Ensure the ignitor lights the pilot. The pilot flame should engulf the flame rod as shown in Figure 11 .
9 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. WARRANTY Your gas appliance is covered by a limited twenty year warranty. You will find a copy of the war- ranty accompanying this manual. Please read the warranty to be familiar with its coverage. Retain this manual.
10 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Remote Control System (Standard) H0249 RCL Standard Remote Control System (Model RCL) The Model RCL (Standard) Remote Control System, features a simplistic on/off control function for the fireplace.
11 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Door Frame Kits - 4 piece (shown) Brass Finish 99L62 DFK-4B Brushed Stainless Finish 99L63 DFK-4BS Door Frame Kits - 2 piece Brass Finish 17M28 DTK-4B Brushed Stainless Finish 17M29 DTK-BS Door Frame Kits Decorative door frame kits are available for use with these appliances.
12 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. LIGHTING INSTRUCTIONS – HONEYWELL AND SIT MILLIVOLT GAS VALVE WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
13 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. INSTRUCTIONS D’ALLUMAGE – VANNE GAZ MILLIVOLT HONEYWELL ET SIT INSTRUCTIONS D'ALLUMAGE 8. Enfoncez le bouton de réglage jusqu’au fond et gardez-le enfoncé.
14 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. A. When lighting the appliance, follow these instructions exactly.
15 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. INSTRUCTIONS D’ALLUMAGE — ELECTRONIC INSTRUCTIONS D’ALLUMAGE POUR VOTRE SÉCURITÉ, LISEZ CES INSTRUCTIONS AVANT L’ALLUMAGE A. Lorsque vous allumez l’appareil, suivez exactement ces in- structions.
16 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. TROUBLESHOOTING THE MILLIVOL T GAS CONTROL SYSTEM 1. Spark ignitor will not light pilot after repeated triggering of ignitor button. 2. Pilot will not stay lit after carefully following the lighting instructions.
17 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. TROUBLESHOOTING THE ELECTRONIC IGNITION SYSTEM SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION See Below. Disconnect the two black wires from the wire nuts. Test switch(s) for continuity with a multimeter.
18 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. REPLACEMENT PARTS LIST Natural Propane No. DESCRIPTION Part No. Qty. Part No. Qty. Gas Fireplace Assembly – – – – 1. Hood LB-91941FZ 1 LB-91941FZ 1 2. Louver LB-92400F 7 LB-92400F 7 3. Louver, (Base) LB-92402F 1 LB-92402F 1 4.
19 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. REPLACEMENT PARTS 9 4 1 2 5 14 6 3 2 11 10 13 8 15 7 41 40 21 43 23 22 24 42 26 25 30 31 32 33 34 35 36 27 37 20 12 44 16.
20 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Printed in U.S.A. © 2002 by LENNOX HEARTH PRODUCTS P/N 725,023M REV. J 11/2004 The manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products.
An important point after buying a device Superior NEC004-TD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Superior NEC004-TD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Superior NEC004-TD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Superior NEC004-TD you will learn all the available features of the product, as well as information on its operation. The information that you get Superior NEC004-TD will certainly help you make a decision on the purchase.
If you already are a holder of Superior NEC004-TD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Superior NEC004-TD.
However, one of the most important roles played by the user manual is to help in solving problems with Superior NEC004-TD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Superior NEC004-TD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
