Instruction/ maintenance manual of the product DuraDrive AT2 Super Talent Technology
Go to page of 8
SSD User Manual Solid State Driv e ssd .super talent.c om.
Table of Contents 1. Product Overview ................................................... 2 (1.1) – PRODUCT DEFINITION .................................................. (1.2) – INTERFACE DESCRIPTION ...............................................
(1.1) – Product Denition (1.2) – Interface Description A Solid State Drive (SSD) is a storage device that is based on semiconductors rather than rotating magnetic platters. Super Talent uses Flash memory as the storage media because they are fast, highly reliable, widely available, and are non-volatile.
(1.3) – SSD Diagram 1.3.1 SATA Diagram Figure 1 shows the internal components and its connections in an SSD. The three main components that make up an SATA SSD are the following: 1.3.2 IDE Diagram Figure 2 shows the internal components and its connections in an SSD.
(2.1) Back Up Your Data Back up your existing drive before installing the SSD (2.2) Visual Inspection Before unpacking and handling the SSD, discharge the static electricity by touching the metal chassis of your computer or by using an anti-static wrist strap.
(3.1) SSD Conguration The SSD can be installed in any mounting position in your computer. (3.2) Install the SSD 1. Power down the PC 2. Remove the computer system outside cover 3. Connect a cable between the SSD and the host 4. Replace the PC cover 5.
4. Using the SSD 6 (4.1) Handling the SSD Be cautious when unpacking, installing, and handling the SSD drive. Misuse of the SSD voids all warranty. Follow these instructions when managing the SSD. WARNING: If the warranty void label is broken, the warranty voids immediately (4.
(5.1) Technical Support If additional support is needed, please visit our Web site for the following topics. CORPORATE HEADQUARTERS United States 2077 North Capitol Avenue San Jose, CA 95132 U.S.A. Tel: 1.408.934.2560 Fax: 1.408.719.5020 ssd.supertalent.
An important point after buying a device Super Talent Technology DuraDrive AT2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Super Talent Technology DuraDrive AT2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Super Talent Technology DuraDrive AT2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Super Talent Technology DuraDrive AT2 you will learn all the available features of the product, as well as information on its operation. The information that you get Super Talent Technology DuraDrive AT2 will certainly help you make a decision on the purchase.
If you already are a holder of Super Talent Technology DuraDrive AT2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Super Talent Technology DuraDrive AT2.
However, one of the most important roles played by the user manual is to help in solving problems with Super Talent Technology DuraDrive AT2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Super Talent Technology DuraDrive AT2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
