Instruction/ maintenance manual of the product CSE-RACK14U SUPER MICRO Computer
Go to page of 24
CSE-RACK14U Mini-Rack Cabinet User ’ s Guide Revison 1.0a.
CSE-RACK14U Mini-Rack Cabinet User ’ s Guide ii The information in th is User ’s Guide has been ca ref u lly reviewed and is belie ved to be accurate.
0-iii Preface About this Manual This manual is written for professional system integrators, Information T echnology professionals, service personnel and tech nicians. It provides information for the installation and use of Supermicro's CSE-RA CK14U mini-rack cabinet.
CSE-RACK14U Mini-Rack Cabinet User ’s Guide 0-iv Notes.
v Table of Contents Chapter 1 Introduction .............. ................. ................. ................. .............. ............... 1-1 1-1 Overview ................... ................. ................. ................ ................. .
CSE-RACK14U Mini-Rack Cabinet User ’s Guide vi Door Filter (Optional) ..................... ................. ................ .................... .... 4-2 4-3 Gauge Label Indica tors .............. ................ ................. ..............
1-1 Chapter 1 Introduction 1-1 Overview The CSE-RACK14U mini-rack cabinet is optim ized for office, small/medium businesses (SMB), research and academic institutions and profession al studio environments (movie animation, music production, and so on).
CSE-RACK14U Mini-Rack Cabinet User ’s Guide 1-2 1-4 Features The mini-rack cabinet offers the following features: • Supports EIA 19" rackmount servers with regular square mounting holes • Ideal for office environments - 30.
1-3 Chapter 1: Introduction 1-6 Cont acting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com ( General Information) support@supermicro.
CSE-RACK14U Mini-Rack Cabinet User ’s Guide 1-4 Notes.
2-1 Chapter 2 System Safety 2-1 Electrical Safety Precautions Basic electrical safety pr ecautions should be followed to protect yourself and the equipment from harm and damage: • Be aware of the locations of the power on/off switch on the chassis as well as the room's emergency power-off switch, disconnection switch or electrical outlet.
CSE-RACK14U Mini-Rack Cabinet User ’s Guide 2-2 2-3 ESD Peculations Electrostatic discharge (ESD) is generated by two objects with different electrical charges coming into contact with each other . An electrical disc harge is created to neutralize this difference, which can dam age electronic components and printed circuit boards.
3-1 Chapter 3 Setup and Installation This section covers setup and installati on of the CSE-RACK14U min i-rack cabinet. 3-1 Unp acking the System Follow the steps below to unpack the rack from its shipping cont ainer . Step1: Inspect the Shipping Container Y ou should inspect the box the rack was shipped in and note if it was damaged in any way .
CSE-RACK14U Mini-Rack Cabinet User ’s Guide 3-2 S tep 3: Remov e To p of Shippin g Container Remove the top of the shipping container to expose the rack unit.
3-3 Chapter 3: Setup and Installation Step 5: Lift Out Rack Unit Lift out the rack unit from the shipping container base. T ake care not to damage the rack unit when removing it from the base. Step 6: Inspect Rack Unit Inspect the rack unit to make sure it is free of defects.
CSE-RACK14U Mini-Rack Cabinet User ’s Guide 3-4 3-2 Choosing a Setup Location Decide on a suitable location for the rack un it. It should be situated in a clean, dust-free area that is well ventilated. Avoid areas w here heat, electrical noise and electromagnetic fields are generated.
3-5 Chapter 3: Setup and Installation Reliable Ground A reliable ground must be maintained at all times. T o ensure this, the rack itself should be grounded. Particular attention should be given to power supply connections other than the direct connections to the branch circuit (i.
CSE-RACK14U Mini-Rack Cabinet User ’s Guide 3-6 Notes.
4-1 Chapter 4 Features This chapter covers features and their us e s in the CSE-RACK14U mini-rack cabinet. These features are shown below in Figu re 4-1 . 4-1 Mobility and St ability The CSE-RACK14U mini-rack cabinet is fu lly mobile with four caste rs and can be stabilized with four support stands.
CSE-RACK14U Mini-Rack Cabinet User ’s Guide 4-2 Supporting St ands The mini-rack cabinet has support stands at each corner that can be screwed down to support and stabilize the cabinet. Before inst alling equipment in the mini-r ack cabinet, be sure to secure it with the support stands first.
4-3 Chapter 4: Features 4-4 Cable Egress Holes Eight detachable floor holes are placed in the rear of the CSE- RACK14U mini-rack cabinet for use in threading cabling or wiring safely through the cabinet to power outlets or network ports at the bottom or rear of the cabinet.
CSE-RACK14U Mini-Rack Cabinet User ’s Guide 4-4 Notes.
Disclaimer The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilitie s or syste ms, aircraf t, aircraft devices, aircraft/.
CSE-RACK14U Mini-Rack Cabinet User ’s Guide.
An important point after buying a device SUPER MICRO Computer CSE-RACK14U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SUPER MICRO Computer CSE-RACK14U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SUPER MICRO Computer CSE-RACK14U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SUPER MICRO Computer CSE-RACK14U you will learn all the available features of the product, as well as information on its operation. The information that you get SUPER MICRO Computer CSE-RACK14U will certainly help you make a decision on the purchase.
If you already are a holder of SUPER MICRO Computer CSE-RACK14U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SUPER MICRO Computer CSE-RACK14U.
However, one of the most important roles played by the user manual is to help in solving problems with SUPER MICRO Computer CSE-RACK14U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SUPER MICRO Computer CSE-RACK14U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
