Instruction/ maintenance manual of the product SRC-3810 Sunwave
Go to page of 58
SRC-3810/3815 Touch Screen Remote Control User Manual 031021.
.
Preface About this manual This manual is designed to make usi ng the SRC-3810/3815 T ouch Screen Remote Control as eas y as possible. Information in this document has been carefull y checked for accuracy; however, no guarantee is given to the correctness of the contents.
SRC-3 8 SERI ES User’ s Manu al ii Table of Contents Chapter 1 - Introducing the SRC- 3810/3815 .................................. 1 SRC-3810/381 5 Feat ures ............................................................. 1 Unpac king t he SR C-381 0/3815 .
Preface iii Using Ma cros .............................................................................. 27 Crea ting a New Ma cro .................................................... 28 Delet ing a Ma cro .............................................
.
1 Chapter 1 - Introducing the SRC-3810/3815 Congratulations on your purchase of the SRC- 3810/3815 To uch-Screen Remote Control. The SRC- 3810/3815 is a di gital universal remote cont rol that is easy.
SRC-3 8 SERI ES User’ s Manu al 2 • SRC-3815 can Choose of IR (direct to device) or RF ( to IR-extender to device) signal transmission. • Lost remote finder button – ac tiva tes be ep to lo ca te when lost (SRC-3815 with SEL-6000 IR-extender).
Identifying Components 3 Identifying Components Refer to the following illustration to identify the components of the SRC-3810/3815. Infrared Eye: point the infrared eye at the device you want to operate. Light Sensor: detects ambient light to automatically set the LCD panel backlight.
SRC-3 8 SERI ES User’ s Manu al 4 For SRC-3815 Remote Control IR Out jack – Connect the IR blaster cable to this jack to operate a specific device. IR-extender address setti ng – Set the RF address of the IR- extender by selecting and address number between 0 ~ 9.
5 Chapter 2 - Getting Started This c hapte r pr ovides you with th e inf orma tion to quickly get using the S RC-3810/3815. Installing IR-extender 1. Plug in AC adapter in to AC adapter jack on I R-extender and into A C wall outlet. 2. Set address code .
SRC-3 8 SERI ES User’ s Manu al 6 Battery full Battery half full Battery low Figure 2: The Battery Icon When the batteries are almost d epleted, the battery low icon appears. When the battery low icon appears, you are not allowed to enter setup mode.
About the Tou ch Scre en 7 About the Touch Screen The Touch Screen reduces the number of buttons by changing its configurati on for each device selected. In this way, the Touch Screen pro vides 672 but tons (16 devices x 2 pages x 21 buttons per page).
SRC-3 8 SERI ES User’ s Manu al 8 Touch Screen Buttons The Touch Screen buttons enable you to operate the SRC-3810/3815 and your external devices. Use these buttons to program codes f rom your existing remotes, control your devices , and set up command sequences called macros.
Entering the S etup Men us 9 Figure 3: Entering the Setup Menus When the battery low icon appears or you are in QUICK CH mode, you are not allowed to enter setup mode. Navigating the Setup Menus While in the setup menus , press and on the Touch Screen to scroll up and down t hrough the menus and settings.
SRC-3 8 SERI ES User’ s Manu al 10 The fallowing illustration shows the setu p menu tree: Figure 5: Setup Menu Hierarchy The following chapter describes each menu.
11 Chapter 3 - Setting Up the SRC-3810/3815 Before the SRC-3810/3815 c an be used to control a device, it needs to be configured to display your existing remote control buttons and it must be programmed to send the correct infrared signals. This chapter guides you through the Touch Screen layout and SRC-3810/3815 setup proc edure.
SRC-3 8 SERI ES User’ s Manu al 12 Creating a New Device Follow these steps to create a new device: 1. Press or to sel ect NEW . 2. Press . 3. Press the device key you want to use for this device (for example AMP).
Device Menu 13 You are promp ted to selec t an attribute for the new device . 5. Press or to select a device whose a ttributes will be loaded to the ne w device . 6. Press to confirm the entry. Re-Labeling Devices Follow these instructions to edit a device label.
SRC-3 8 SERI ES User’ s Manu al 14 4. Edit the de vice label: • Press or to scroll through the characters (from A-Z, 0-9, and the space key). Note: Press and hold or to quickly scroll through the characters. • Press or to mo ve to the previous or next character.
Device Menu 15 an IR signal to the desired dev ice. Both th e device and the IR-extender must be set to the same RF address to operate properly. To set the RF address: 1. Press or to select RF ADDR 2. Press Ok 3. Select either IR to operate in the IR mode or an RF address (0- 9) f or t he I R-e xt end er.
SRC-3 8 SERI ES User’ s Manu al 16 Deleting Devices Follow these instructions to delete a device conf igura tion inc ludin g the LC D disp lay a nd cod es. 1. Press or to sel ect Delete . 2. Press . 3. Press the device key you want to delete (for examp le TV).
Code Menu 17 Code Menu Enter the setup menus, scroll to Code and press to enter the code menu. In the code menu, press and to scroll thr ough the code menu options: • Pre-C ode : us e thi s me thod to a utoma tica lly con fig ure all buttons on the SRC-3810/3815 for use with a specific manufactur e model numb er.
SRC-3 8 SERI ES User’ s Manu al 18 Using Pre-Code to Program Devices Follow these instructions to program a device using preprogrammed codes. Press or to select PRE-CODE ， and then press OK. Manually Selecting the Code 1. Turn on the device you want to pr ogr am th e SRC - 3810/3815 t o control.
Code Menu 19 Note: Some codes are d esigned to operate more than on e model. It may take several trie s to find the code that works with your unit. 6. Press to confirm the select ion and save the settings or click to ex it. Note: When y ou enter the Man ufacture Code a nd an 'ERROR’ message is displayed, it could be for two reasons: 1.
SRC-3 8 SERI ES User’ s Manu al 20 Using Code Learning Mode Follow these instructions to enable the SRC-3810/3815 to detect and learn a remote control's confi guration.
Code Menu 21 Learning from Another Remote Control Before using learning mode, set both remotes on a flat surface so that the device’s remot e control IR is pointe d at th e SRC- 3810 /3815’ s learn ing ey e, whic h is located at the bottom of the unit.
SRC-3 8 SERI ES User’ s Manu al 22 Erasing Key Codes Follow these instructions to delete either SRC- 3810/3815 key cod es. 1. Press or to sel ect del key . 2. Press . 3. Select t he device whose key code you want to delete (for example TV ). 4. Select the key corresponding to the code that yo u want to delete.
Code Menu 23 Erasing Device Codes Follow these instructions to delete a device code from the SRC-3810/3 815. 1. Press or to sel ect del bank . 2. Press OK. 3. Select t he device whose codes you want to delete (for example TV ). Press to scroll between device pages.
SRC-3 8 SERI ES User’ s Manu al 24 Debugging Device Codes Use this procedure if the SR C-3810/3815 is unable to recognize the infrared si gnals from another remote control.
Code Menu 25 1. Press or to sel ect debug . 2. Press . 3. Point the target device's remote control’s infrared eye at the SRC-3810/3815 learning eye located at the bottom of the u nit (see Figure 1: Front View, Page3) and keep apart between 2~4 inches ( 5~10cm).
SRC-3 8 SERI ES User’ s Manu al 26 LCD Layout The layout edit mode enables you to customize the SRC-3810/3815's Touch Screen display to match your existing remote controls. 1. Press or to sel ect layout . 2. Press . 3. Select a device (for example TV).
Using Macros 27 Using Macros A macro is a series of commands. The Ma cro feature enables you to initiate a sequence of up to 60 commands with a single button. You can create a macro on any control button and insert time delays into the sequence. Remember, however, assigning a macro eliminates the button's original function.
SRC-3 8 SERI ES User’ s Manu al 28 Creating a New Macro Follow these steps to create a new macro: 1. Press or to sel ect NEW . 2. Press . 3. Press the device key you want to us e for thi s macr o (f or example TV ), and then press any key to define as the macro key.
Using Macros 29 The following example will help you to better understand creati ng a macro sequence. It i s provided to teach you how to record a macro but is by no means the only macro sequence yo u can create. Example: the following defines a mac ro that turns on your TV, switches the TV to DVD viewing mode, turns on the DVD, and plays a DVD.
SRC-3 8 SERI ES User’ s Manu al 30 Deleting a Macro Follow these steps to delete a macro: 1. Press or to sel ect delete . 2. Press . 3. Press the device k ey for the macro you want to delete . The screen displays the macro key for the device. 4. Press the macro key you want to delete; the macro key is deleted when the key is pressed.
Using Macros 31 Viewing a Macro Follow these steps to view the steps of a macro: 1. Press or to sel ect View . 2. Press . 3. Press the device k ey for the macro you want to view. The screen displays the macro keys for the device. 4. Press the macro key for the macro you want to view.
SRC-3 8 SERI ES User’ s Manu al 32 Setting QUICK CHs The SRC-3810/3815 enables yo u to classify c hannels into groups ma king it easier to lo cate all the pr ograms on every device. Enter the setup menus, scroll to QUICK CH and press to enter the QU ICK CH menu.
Setting QUICK CHs 33 4. Enter the QUICK CH number (e.g., 12). Note: You c an only use buttons number 0- 9, +10, and Enter to enter the QU ICK CH. 5. Select the QUICK CH (e.g., News). 6. Repeat steps 4 ~ 5 to continue adding QUICK CHs. 7. Press to exi t to the se tup menu.
SRC-3 8 SERI ES User’ s Manu al 34 Relabeling a QUICK CH This option enables you to edit the QUICK CH label on the LCD. Follow these steps to edit a QUICK CH: 1. Press or to sel ect relabel . 2. Press . 3. Press the QUICK CH that you want to relabel (e.
Using the Transmission Featur e 35 After you have set up the QUICK CH, pre ss any QUICK CH (e.g., “NEWS”) to open the QU ICK CH screen. Usi ng the CH+ and CH- to scroll thro ugh all channe ls stored in thi s QUICK CH . Press that QUICK CH (e.g., “NEW S”) again to exit the QUICK CH screen.
SRC-3 8 SERI ES User’ s Manu al 36 2. Press to be gin tra nsmi ssion . Dur ing th e trans mis sio n, th e LCD displays blank keys as shown in the illustrat ion. When the transmis sion is completed, OK is displayed on the LCD. If ther e is an error in tran smi tting t he d ata, ERROR is displayed.
Miscellaneous Menus 37 Setting the Date and Time 1. Press or to sel ect CLOCK . 2. Press . 3. Enter the date: • Press or to scroll through the characters: Month: JAN~DEC Day: 01~31 Year: 02~50 ( 2002~2050) Note: Press and hold or to quickly scroll through the characters.
SRC-3 8 SERI ES User’ s Manu al 38 Setting the Power Down Time 1. Press or to sel ect power . 2. Press . 3. Press or to s elec t the ti me that will el apse before the SRC- 3810/3815 turns off. Note: The power down time ca n be set from 01 ~ 90 minutes at 1- minute increment s.
Miscellaneous Menus 39 5. Press or to set the li ght sens or sen sitiv it y manuall y or press to aut omati cally detect the ambient light brightne ss. Note: The lig ht sensor levels are 0 ~ 16. 6. Press to confirm the setting. Setting the Beep Signal 1.
SRC-3 8 SERI ES User’ s Manu al 40 Checking the Version Number 1. Press or to sel ect version . 2. Press . 3. Press or to view the program and pre-programmed (pre-code) version numbers. 4. Press to exit . Resetting the SRC-3810/3815 to Factory Defaults This item ena bles you to set the S RC-3810/3815 back to the fact ory defaul t configur ation.
Resetting the SRC-3810/3 815 to Factory Default s 41 1. Press or to sel ect Reset . 2. Press . 3. You are promp ted to confir m the reset. 4. Press to c onf irm the r ese t or press to exit .
42 Chapter 4 - Controlling Devices The SRC-3810/3815 i s designed to be simple and straightforward to operate. This chapter explains how to use the SRC-3810/3815 to control all y our devices. This Chapter assumes you have al ready setup the SRC-3810/3815 and assig ned Infrared codes to different buttons.
Alternating Touch Screen Pages 43 Alternating Touch Screen Pages Press the Page Button to alternate betw een page 1 and page 2 of the device buttons. Viewing the Macro Key You can view which keys are assigned to macros for any particular device. Follow these instructions: 1.
SRC-3 8 SERI ES User’ s Manu al 44 Using the QUICK CH Buttons For information on setting u p the QUICK CH buttons, refer to Setting QU ICK CHs on page 32. 1. Press the device bu tton tha t cor res pon ds to the QUICK CH you want to use (for examp le, TV).
Controlling Devices 45 Controlling Devices 1. Make sure the SRC-3810/3 815 is pointing at the target de vice. 2. Press the hardware but ton or Touch Screen key you want to send. The Record Key Must Be Held Down for 2 Seconds : As a safety feature, the record button needs to be pressed for 2 seconds.
46 Appendix A - Specifications Model SRC-3810/3815 Dimensions (W x H x D): 2.4 x 8.3 x 1.0 inches (6.0 x 21.0 x 2.5 cm) Weight (without Batteries): 5.3 oz (150g) Device Number: 16 devices LCD Screen (W x H): 1.
47 Appendix B - Accessories SLC–2080 The SLC–2080 is an optional link cable that enables transmission of system setup t o a personal computer or another SRC-3810/3815. With th e RemoteComm software enables user to customize the remote control , create macros and timers.
SRC-3 8 SERI ES User’ s Manu al 48 IR Blaster Cable – SRC-IR -( for SRC-3815 ) The IR Blaster Cable is an optional 6 ft. cable with an IR emitter on one end that enables the IR-extender to send signals to a device t hat would not be within its normal directional range.
Troubleshooting Tables 49 Appendix C – Troubleshooting Troubleshooting Tables Problem Solution LCD does not show anything when you touc h it or press the hardware buttons. Batteries may be dead. Replac e the batteries with 4 new AAA Alkal ine Batteries ( page 5).
SRC-3 8 SERI ES User’ s Manu al 50 The SRC-3810/3815 doesn’t opera te a device . In RF mode: Make sure the SEL-60 00 IR-extender is aimed at desired equipment . Make sure RF Addr ess on IR-extender matches sett ings in SRC-3815. You canno t operate a device even after teaching the device using the learning function.
Troubleshooting Tables 51 Macro does not work. Be sure to aim the SRC-3810/3815 at the devices while the macro commands are being sent. Macro was not properly set up. Repeat macro set-up procedure (page 27). IR LEARNING is not successful. Replace batterie s in the SRC-381 0/3815 and the r em ote y ou a re tr ying to configure.
SRC-3 8 SERI ES User’ s Manu al 52 One or more devices do not respond in RF mode. When operating properly , the red LED light on the front of the IR-extender will blink while sending or receiving signals. To test IR-extender: 1. Press Remote Locator button.
An important point after buying a device Sunwave SRC-3810 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sunwave SRC-3810 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sunwave SRC-3810 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sunwave SRC-3810 you will learn all the available features of the product, as well as information on its operation. The information that you get Sunwave SRC-3810 will certainly help you make a decision on the purchase.
If you already are a holder of Sunwave SRC-3810, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sunwave SRC-3810.
However, one of the most important roles played by the user manual is to help in solving problems with Sunwave SRC-3810. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sunwave SRC-3810 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
