Instruction/ maintenance manual of the product Solitaire 10 Sunfire
Go to page of 24
DIM - STANDBY BRIGHT - ON Solitaire 10 T rue Subwoofer User's Manual Solitair e 10 and Solitair e 12 DIM - STANDBY BRIGHT - ON Solitaire 10.
2 5SERgS-ANUAL Safety In struc tions 1. Read In struc tions -– All the safe ty and op er a tion instructions should be read before the Sun fi re Com po nent is operated. 2. Retain Instructions — The safety and operating in struc tions should be kept for future reference.
3 5SERgS-ANUAL 15. T o Prevent Electric Shock , do not use this polarized plug with an extension cord, re cep ta cle or other outlet unless the blades can be fully inserted to prevent blade ex po sure.
4 5SERgS-ANUAL Y our Sun fi re Subwoofer should reach you in perfect con di tion. If you do notice any ship ping dam age, please contact your Sun fi re Dealer im me di ate ly .
5 5SERgS-ANUAL Y our Sun fi re True Subwoofer EQ Soli- tiare is designed to give you the best pos- sible low-fre quen cy sound quality for your Home Theater ex pe ri ence.
6 5SERgS-ANUAL 1. V olume This control lets you match the output level of the subwoofer to the level of your sat el lite/main speak ers. The subwoofer output will increase as this control is rotated clockwise. When you have just installed your system, turn this down fi rst before turning on your sub woof er .
7 5SERgS-ANUAL passive network with a fi xed crossover frequency of 70 Hz and a 6 dB per octave slope. We rec om mend using this high-pass function with main/satellite speak ers that are small and not designed to reproduce low fre quen cies.
8 5SERgS-ANUAL Control Panel Features continued EURO (230 V AC) MODEL: Connect the linecord to the subwoofer before connecting the other end to a 230 V olt, 50/60 Hz AC outlet. The outlet must have a cir cuit rating of 8 amps or more. Never plug the Euro (230 V AC) model subwoofer directly into 120- 130 V olts AC.
9 5SERgS-ANUAL Installation Observe the following general pre cau - tions and read the safety in struc tions on pages 2 and 3 before using your Sun fi re Subwoofer . • Never open the cabinet or remove the metal control panel as this might result in an electrical shock to you, or dam age to the unit.
10 5SERgS-ANUAL Please consider the following when set- ting up your new system : • Before making or changing any connec tions, AL W A YS make sure that the subwoofer and your other components are turned OFF . Also turn down the volume control of the sub woof er and your pream pli fi er or receiver .
11 5SERgS-ANUAL Placing your subwoofer in a corner will produce optimum performance. Ex per i ment with at least two corners and decide which is the best, or you can try the following procedure: 1. Start by placing the subwoofer right on the seat of your favorite couch or easy chair .
12 5SERgS-ANUAL DIM - STAND BY BRIGH T - O N S olita ire 1 0 Subwoofer performance is greatly af- fected by the room in which it is situated, and the positioning within the room. The room effects will boost and cut the output levels reaching your listening position.
13 5SERgS-ANUAL 9. The sub automatically calculates the best equalization, based on the mea- sured frequency response at your listen- ing position. This will be saved, before returning to the normal listening mode. 10. In normal listening, you can adjust the overall effect of the saved EQ settings with the Equalizer Authority control.
14 5SERgS-ANUAL DIM - STANDBY BRIGHT - ON Solitaire 10 PREAMPLIFIER MAIN OUTPUTS R SUB/LFE OUT R L L AMPLIFIER INPUTS T O FRONT SPEAKERS System Con fi gurations The following pages show some typical con nec tions that you might make in your in stal la tion.
15 5SERgS-ANUAL If your preampli fi er does not have a sub/LFE output, you can use “Y” cables to send its main outputs to both the sub woof er and your am pli fi er . The subwoofer will play the low frequency range and your front speak ers will play the full range.
16 5SERgS-ANUAL If you are using a pream pli fi er which does not have a sub/LFE output, you can send its left and right front output into the sub woof er ’ s Line Level inputs and then connect the sub woof - er ’ s High-Pass outputs to the inputs of your ampli fi er.
17 5SERgS-ANUAL If you are using a receiver which does not have a sub- woof er output or line level outputs (pre-outs), you can connect its speak er outputs to the subwoofer ’ s speaker- level inputs. The front speak ers can still be con nect ed to your receiver .
18 5SERgS-ANUAL There are two main methods for adjust- ing the level, crossover frequency and phase of the Sun fi re Subwoofer to match a sys tem: • Bob Carver ’ s preferred method: By listening and making the adjustments to suit your taste. • Laboratory method: By measuring the output and adjusting for a fl at frequency response.
19 5SERgS-ANUAL Speci fi cations (Solitaire 12) Ampli fi er Output 1,500 watts rms (3.3 Ω impedance) High Cut Filter 30 Hz - 100 Hz adjustable, with a "Bypass" position.
20 5SERgS-ANUAL Ampli fi er Output 1,250 watts rms (3.3 Ω impedance) High Cut Filter 30 Hz - 100 Hz adjustable, with a "Bypass" position.
21 5SERgS-ANUAL T roubleshooting The Sun fi re Subwoofer is expertly de signed and built to provide years of trou ble-free per for mance. Most problems that occur can usually be solved by checking your setup or making sure that the com po nents con nect ed to the am pli fi er are on and fully op er a tion al.
22 5SERgS-ANUAL Hum Adding any component such as a sub- woof er to an existing system will often give rise to a hum which wasn’t there before. Y our fi rst thought may be that the sub woof er has a problem, but this is more than likely caused by a “ground- loop” in your system.
23 5SERgS-ANUAL Limited W arranty Sun fi re Corporation is proud of its prod ucts which have been built with care using ad vanced technology and premium com po nent parts.
Manual part number 913-101-00 Rev B Solitaire.
An important point after buying a device Sunfire Solitaire 10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sunfire Solitaire 10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sunfire Solitaire 10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sunfire Solitaire 10 you will learn all the available features of the product, as well as information on its operation. The information that you get Sunfire Solitaire 10 will certainly help you make a decision on the purchase.
If you already are a holder of Sunfire Solitaire 10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sunfire Solitaire 10.
However, one of the most important roles played by the user manual is to help in solving problems with Sunfire Solitaire 10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sunfire Solitaire 10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
