Instruction/ maintenance manual of the product OLE-2SF Sunfire
Go to page of 24
.
2 Safety W ARNING – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Important Safety Instructions 1. Read Instructions 2. Keep these Instructions 3. Heed all W arnings. 4. Follow all Instructions 5. Do not use this apparatus near water .
Contents Important Safety Instructions ...................... 2 Introduction ................................................. 4 Features ...................................................... 7 System Design, Installation and Connections ............
Introduction The Olé ® -2SF Film Interactive T ouchpad (FIT) is a revolutionary in-wall controller for your Sunre receiver or processor . Using a photographic lm overlay instead of hard button.
Features • Plug-and-play . Right out of the box, the Olé-2SF controls Zone 2 on Olé-ready Sunre receivers and processors • Simple SunT ools™ PC program- ming for customization • Sunre .
Installation & Usage T ips • When properly installed, nothing should be applying contact pres- sure to the touchpad except for the operator ’s nger .
Features 1. Mounting Screw (x 4) Use these screws to mount the touchpad into a standard 32 cu in. double-gang electrical box. 2. Program Button This button is for future use. 3. Light Sensor When this sensor is enabled, the Olé-2SF backlight will brighten or dim depending on the room's ambient light conditions.
8 1 1 9 10 12 12 6 5 13 5. Power T urns system audio on and off. 6. System Bass/T reble control and other system options. 7. Home This toggles between the main source selection screen and the current source control. 8. Source selection View/change the source selection pages.
14. Z•NET/VIA!NET Switch Y ou must set this switch to VIA!NET for use with Sunre receivers and processors. 15. System RJ-45 Jack Connect this jack with Cat-5 cable to the TP1 or TP2 RJ-45 con- nectors on the rear panel of your Sunre receiver or processor .
System Design, Installation and Connections Planning Before installing the Olé-2SF , it is essential to have a detailed and ac- curate system design. An authorized Sunre installer should be con - tracted for proper installation and programming of your touchpad.
Rough-In Roughing-in the Olé-2SF requires careful attention to the design plan made previously . Review the previ- ous page and make a list of things to factor in to specic mounting loca - tions, before deciding exactly where to place the unit. In order to avoid Electro-Magnetic Interference (EMI), do not mount touchpads close to light dimmers.
Connectors/Pinout The Olé-2SF has a system RJ-45 connector and a ve-pin Interface Port connector which each perform specic functions. All applications use the RJ-45 connector , while certain situations will require the use of the Local interface port.
Local IR Interface Port Use this connector when utilizing the Olé-2SF’s local control features, such as local source control, local IR sensors, or sense-enabled auto- mated sequences. W arning: The connection labeled “+12 V olts Out” is a voltage output.
Local IR Input The Local IR-RECEIVER IN is typically used to connect an external IR sensor to the touchpad. T ypical applications include a plasma- friendly IR sensor placed near a TV , or an auxiliary IR sensor placed in an area more convenient than the location of the touchpad.
Local Sense In The LOCAL SENSE IN port allows a contact-closure to trigger IR se- quences programmed into the Olé- 2SF using SunT ools. Use a motion sensor to activate a contact-closure and cause automated actions such as system power on, drapes closed, and lights dimmed, for example.
System Connections Zone 2 Control The most common application (and default conguration out of the box) is to use your Olé-2SF as a Zone 2 controller .
CA T-5 USE EITHER CONNECTION MAIN ZONE SPEAKERS MAIN ZONE Olé-2SF Home Theater Control (PC required) The Olé-2SF is perfectly suited as an in-wall Home Theater controller . Y ou may want to include one by the entrance to startup or shutdown the system.
Programming The Olé-2SF must be pro- grammed with Sunre’s SunT ools setup software using a PC running Windows XP . Downloads are facili- tated through the USB download port on the front of the unit. Note: A standard USB-A to USB- mini-B cable must be utilized for programming and is not included with the Olé-2SF .
Feature Enable/Disable: Speaker The Olé-2SF contains a small speaker that allows audible feed- back signals to be heard as a result of button pushes. This feature can be disabled in the SunT ools setup software. IR Sensor The Olé-2SF features a built-in IR Sensor .
Specications Viewing Angle 180° up/down,180° left/right Operating T emp 32°F-104°F / 0°C-40°C OLED Display T ype: 2” Organic LED (OLED) Colors: 252K Resolution: 160 pixels (W) x 128 pixels .
T roubleshooting Power Symptom Cause Solution Olé-2SF does not power up. 1. RJ-45 plug crimped incorrectly; or wiring pinout of RJ-45 reversed. V erify wiring pinout and RJ-45 crimp. Correct by re-crimping RJ-45 to Cat-5 cable. 2. Break in Cat-5 between Zone and “Head-End”.
IR Symptom Cause Solution No control of IR sources. 1. Programming: missing or incorrect IR commands. V erify and correct program- ming. T est IR commands from SunT ools. 2. Wiring: Incorrect wiring between Zone and ‘Head-End”. V erify and correct wiring.
Sunre W arranty 23 Sunre, LLC is proud of its products that have been built with care using advanced technology and premium component parts. Y our unit has been crafted to perform properly for many years.
Manual 913-144-00 Rev A.
An important point after buying a device Sunfire OLE-2SF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sunfire OLE-2SF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sunfire OLE-2SF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sunfire OLE-2SF you will learn all the available features of the product, as well as information on its operation. The information that you get Sunfire OLE-2SF will certainly help you make a decision on the purchase.
If you already are a holder of Sunfire OLE-2SF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sunfire OLE-2SF.
However, one of the most important roles played by the user manual is to help in solving problems with Sunfire OLE-2SF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sunfire OLE-2SF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
