Instruction/ maintenance manual of the product SR8200 Sunbeam
Go to page of 12
Please read these instructions carefully and retain for future reference. Steam Pro Compact Professional Ironing System Instruction Booklet SR8200.
Sunbeam’s Safety Precautions 1 Features of your Steam Pro Compact 2 Using your professional ironing system 4 Care and cleaning 6 Ironing guide 7 Ironing chart 8 Contents.
1 Sunbeam are very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance.
Iron thermostat light The iron thermostat light illuminates to indicate that the iron soleplate is heating, and goes out when it has reached the temperature selected on the temperature dial. The thermostat light cycles on and off during ironing as the iron soleplate maintains the selected temperature.
3 Steam release button Press and hold the steam release button to produce a constant stream of high-powered steam to reduce your ironing time and effort.
Before first use Remove any adhesive stickers, plastic covers or cardboard sleeves from the soleplate. Remove any remaining adhesive by rubbing the soleplate with a cloth dampened with methylated spirits.
5 5. Press and hold the steam release button to iron with steam. T o dry iron, do not press the steam release button. Both the steam ready indicator and the boiler thermostat light will cycle on and off during ironing as the ironing system maintains the selected steam pressure and temperature level.
T o clean the exterior of your appliance, wipe over with a damp soft cloth and wipe dry . Do NOT use harsh abrasives, chemical cleaners or solvents to clean the exterior of your appliance, as these will damage the surface. T o clean the stainless steel soleplate, use a stainless steel or metal cleaner and rub gently with a damp cloth and wipe dry .
7 Selecting the ironing temperature. Always read garment labels and follow the manufacturer’ s ironing instructions. Refer to the Ironing Chart for temperature recommendations. Hints for easier ironing • Sort articles to be ironed according to the type of fabric.
Fabric T emperature Setting Ironing Recommendation Acrylic • Dry iron on wrong side. Acetate • Dry iron on wrong side while still damp or use spray to dampen. Silk •• Iron on wrong side. Use an ironing cloth to prevent shine marks. Nylon •• Iron on wrong side while still damp or use spray to dampen.
‘Sunbeam’ and ‘Steam Pro’ are registered trademarks of Sunbeam Corporation. Designed in Italy . Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. Backed by Sunbeam‘s 2 Y ear Replacement Guarantee and National Service Network.
Consumer Hotline Australia 1800 025 059 New Zealand (09) 912 0747 www .sunbeam.com.au is a registered T rademark of Sunbeam Corporation Limited. ACN 000 006 771.
An important point after buying a device Sunbeam SR8200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sunbeam SR8200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sunbeam SR8200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sunbeam SR8200 you will learn all the available features of the product, as well as information on its operation. The information that you get Sunbeam SR8200 will certainly help you make a decision on the purchase.
If you already are a holder of Sunbeam SR8200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sunbeam SR8200.
However, one of the most important roles played by the user manual is to help in solving problems with Sunbeam SR8200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sunbeam SR8200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
