Instruction/ maintenance manual of the product SMW1100 Sunbeam
Go to page of 16
OWNER’S MANUAL Microwave Oven I SMW11 00 1 2 3 ; i&j 7 P P , J 1. Read these instructions carefully before installing and operating the oven. Keep them for future reference. 2. Record in the space below the SERIAL NO. found on the nameplate on our oven and retain this information for future reference.
‘, PRECAUTIONS TO ‘A VOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY (a) Do not attempt to operate this oven with the door open since open door-operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks.
IMPORTANT SAFETY INSTRUCTIONS When using this electrical appliance, basic . . heated in this oven. safety precautions should be followed, . 5. Use this appliance only for its intended including the following: use as described in this manual.
8. Do NOT operate with an empty oven, as 17. Do NOT dry clothes, newspapers or damage could result to the oven or its other materials in the oven. They may components.
-.__ e...- “1 _-_ .._ . .._ ~.. ,. -. I ! 28. Use only thermometers which are WARNING: It is hazardous for anyone specifically designed for use in other than a trained person to perform microwave ovens.
UTENSILS GUIDE This section lists which utensils can be used in the microwave, which ones have limited use for short periods, and which ones should not be used in the microwave. Recommended , l Microwave browning dish - Use to brown the exterior of small items such as steaks, chops, or pancakes.
l Metal utensils - These can damage your oven. Remove all metal before cooking. Note: Should you wish to check if a dish is safe for microwaving, place the empty dish in the oven and microwave on HIGH for 30 seconds. A dish which becomes very hot should not be used.
If the oven fails to operate: A) Check to ensure that the oven is outlet with another appliance, plugged in securely. If it is not, remove the C) Check to ensure that the control panel is plug from the outlet, wait 10 seconds and programmed correctly and the timer is set plug it in again securely.
CONTROL PANEL DISPLAY Cooking time, power, indicators and Allows you to reheat or cook food automatically without entering power level or time. POWER Use to set power level. TIMER You can use the TIMER function independently, even while a cooking program is going on in the oven.
NUMBER PADS (O-9) RESET Touch to set times or amounts. Clears all previous settings if touched before CLOCK cooking starts. Touch to set the clock. START/STOP Touch to start or stop cooking. OPERATING INSTRUCTIONS , BEEPS DURING OVEN SETTINGS ONE BEEP: Oven accepts the entry.
from 1 to 9. 3. Touch START/STOP to start cooking. timer, sets minutes and seconds from left to right so a single digit can be set (5 for S seconds) or up to 4 digits (2405 for 24 minutes 5 seconds). , 3. Touch START/STOP pad. 70% NOTE: 6 60% l After time has elapsed four beeps 5 50% sound and END appears in display.
“COOK BY WEIGHT” CODE DESCRIPTIONS CODE TYPE MAX WEIGHT 1 Beef 5 lb. 2 Mutton 5 lb. 3 Pork 5 lb. l Meat must be defrosted and at refrigerated temperature.
TO STOP THE OVEN WHILE THE OVEN IS 2. Open the door. OPERATING l YOU can restart the oven by closing the 1. Touch START/STOP pad. door and touching START/STOP pad. l YOU can restart the oven by touching NOTE: START/STOP pad. l Oven stops operating when door is l Toucti RESET to erase all instructions.
1 potato: 4 min. 15 sec. 2 potatoes: 7 min. 40 sec. 3 potatoes: 11 min. 05 sec. 4 potatoes: 14 min. 30 sec. 3. Touch START/STOP pad. SETTING “PIZZA” - Reheating a slice (or two thin ones) of leftover pizza: l.Touch PIZZA pad once. CODE and 0:45 (45 sec.
I I CLEANING AND CARE 1. Turn off the oven and remove the power humidity conditions, this is normal. plug from the wail socket before cleaning. -7. It is occasionally necessary to remove the 2. Keep the inside of the oven clean. When glass tray for cleaning.
31 No tes/No t as.
An important point after buying a device Sunbeam SMW1100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sunbeam SMW1100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sunbeam SMW1100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sunbeam SMW1100 you will learn all the available features of the product, as well as information on its operation. The information that you get Sunbeam SMW1100 will certainly help you make a decision on the purchase.
If you already are a holder of Sunbeam SMW1100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sunbeam SMW1100.
However, one of the most important roles played by the user manual is to help in solving problems with Sunbeam SMW1100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sunbeam SMW1100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
