Instruction/ maintenance manual of the product CF4200 Sunbeam
Go to page of 16
Please read these instructions carefully and retain for future reference. Snack Heroes ™ Chocolate Fountain Instruction Booklet CF4200.
Contents Sunbeam’s Safety Precautions 1 Features of your Snack Heroes ™ Chocolate Fountain 2 Assembly Instructions 4 Using your Snack Heroes ™ Chocolate Fountain 6 Chocolate Measurements and Melting T ips 7 Care and Cleaning 8 T roubleshooting 9 Serving Suggestions 10 Recipes 11 Important instructions – retain for future use.
1 If you have any concerns regarding the performance and use of your appliance, please visit www .sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Features of your Snack Heroes ™ Chocolate Fountain 2 Plastic screw The plastic screw rotates inside the tower to distribute the chocolate flow . Chocolate is moved from the base and cycled through the screw , then distributed back at the top of the fountain.
3 Control settings Warm Up T urn the 'warm up' setting on prior to adding the liquid chocolate. This warms the base ensuring that warm chocolate does not 'set' to the base.
1. Before using the chocolate fountain for the first time, ensure that all packaging material are removed. 2. Wipe the metal base with a damp cloth and wash the plastic screw and tower in warm soapy water; dry all parts well before use.
5 Assembly Instructions (continued) 5. Place the chocolate tower over the plastic screw and into the middle of the base of the chocolate fountain – ensuring that it aligns with the 3 points on the base and is fitted securely .
6 Using your Snack Heroes ™ Chocolate Fountain 1. T urn the chocolate fountain to the ‘off’ dial setting. 2. Plug the unit into a 230-240 volt AC power outlet and switch the power on. Note: Place the chocolate fountain on a flat level bench.
7 Chocolate Measurements and Melting T ips Recommended quantities for the chocolate fountain are as follows: 750g chocolate melts and ¾ cup canola oil. W e recommend using good quality chocolate melts. Other chocolates that are high in cocoa solids work well also.
8 T o clean the chocolate tower and screw 1. Ensure that the chocolate fountain is positioned to the ‘off’ position and remove the plug from the power point. 2. Remove the chocolate tower and screw from the centre of the chocolate fountain.
9 Problem Possible cause Suggested solution The chocolate does not cover the tiers completely The fountain is not level Ensure that the fountain and tiers are level. Not enough chocolate Make sure that there is 750g of chocolate and ¾ cup Canola oil.
10 There are many different foods to serve with the chocolate fountain. Make sure that all pieces are quite large and serve with skewers.
Chocolate Fudge Sauce Makes 1 litre 400g dark chocolate, chopped 100g marshmallow , chopped 600ml cream 1. Place all ingredients in medium saucepan; stir over low heat without boiling, until combined. 2.
12 Chocolate Brownies Makes 24 60g butter 200g dark chocolate, chopped 1 cup firmly packed brown sugar 2 eggs, beaten lightly ½ cup plain flour 1. Preheat oven 180ºC fan forced. Grease 12 hole mini muffin pan.
Should you experienceany difficulties with your appliance, please phone our customer service line foradvice on 1300 881 861 in Australia, or 0800786 232 in New Zealand. Alternatively ,you can send a written claim to Sunbeam at the address listed below .
is a registered trademark. Need help with your appliance? Contact our customer service team or visit our website for information and tips on getting the most from your appliance. In Australia Visit www .sunbeam.com.au Or call 1300 881 861 In New Zealand Visit www .
An important point after buying a device Sunbeam CF4200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sunbeam CF4200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sunbeam CF4200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sunbeam CF4200 you will learn all the available features of the product, as well as information on its operation. The information that you get Sunbeam CF4200 will certainly help you make a decision on the purchase.
If you already are a holder of Sunbeam CF4200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sunbeam CF4200.
However, one of the most important roles played by the user manual is to help in solving problems with Sunbeam CF4200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sunbeam CF4200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
