Instruction/ maintenance manual of the product 4181 Sunbeam
Go to page of 24
Model 4181 6 Speed Blender U SER M ANUAL Modelo 4181 Licuadora de 6 velocidades M ANUAL DEL U SUARIO SUN400_4181_OPPBlend_EN/SP 2/20/02 10:42 AM Page 1.
IMPOR T ANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USE. When using electrical appliances, basic safety precautions should always be followed, including the following: ❏ Read all instructions. Keep these instructions for future use. ❏ V erify that the voltage in your home corresponds to that of your appliance.
❏ Screw on blade assembly firmly . Injury can result if moving blades become exposed. ❏ If the jar should turn when the motor is switched ON, switch OFF immediately and tighten blade assembly . ❏ Do not leave blender unattended while it is operating.
2 Important Safeguards Inside Cover W elcome 2 Learning About Y our Blender 3 Using Y our Blender 4 Hints For Best Use 6 Cleaning 7 Servicing 7 One-Y ear Limited W arranty 8 How T o Obtain W arranty Service 9 T able of Contents Welcome Congratulations on your purchase of Sunbeam ® Model 4181 Blender .
3 K NOW Y OUR B LENDER A. Filler-Cap B. Lid C. Jar (48 ounce) D. Gaskets (small gasket for blade assembly , large gasket for jar collar) E. Blade Assembly (also called cutting blades) F . Base G.Control Panel H. Pulse Button- For instant control the pulse operates only as long as the button is held down.
4 H OW T O U SE Y OUR S UNBEAM ® B LENDER After unpacking the blender , wash everything except the blender base in hot, soapy water . Dry thoroughly . Do not place in dishwasher . Wipe the blender base with a damp cloth or sponge. Do not immerse the base in water .
5 6-Speed Speeds are Chop, Mix, Grate, Blend, Liquefy , and Pulse/Of f. Pulse is a controlled cycle operation. This means it operates only while the button is held down. All other speeds are continuous cycle operation. They operate continuously at whatever speed is selected until the “Off” button is pressed.
6 H INTS FOR B EST U SE ❏ Processing hot foods or liquids in the blender may cause hot liquid to spurt out when the cover is removed. Always remove the filler-cap from the cover before blend- ing hot foods or liquids. (Please review Important Safeguards).
7 H OW TO C LEAN THE B LENDER 1. Unplug the blender from electrical outlet. 2. Wipe blender base, control panel, and cord with a damp cloth or sponge. T o remove stubborn spots, use a mild, non-abrasive cleanser . 3. T o clean jar , unscrew blade assembly and remove from jar .
8 1-Y EAR L IMITED W ARRANTY Sunbeam Products, Inc. (“Sunbeam”) warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. Sunbeam, at its option, will repair or replace this product or any component of the product found to be defective dur- ing this warranty period.
9 limitations may not apply to you. This warranty gives you specific legal rights and you may have the rights that vary by state, province and/or jurisdiction. How to obtain W arranty Service T ake the product to an Authorized Sunbeam Service Center .
D O NOT SEND THIS PRODUCT TO THE PLACE OF PURCHASE For product questions: Sunbeam Consumer Service P .O. Box 948389 Maitland, FL. 32794-8389 1.800.458.8407 www .sunbeam.com D O NOT SEND PRODUCT TO THE ABOVE ADDRESS ©2002 Sunbeam Products, Inc. All rights reserved.
Model 4181 6 Speed Blender U SER M ANUAL Modelo 4181 Licuadora de 6 velocidades M ANUAL DEL U SUARIO SUN400_4181_OPPBlend_EN/SP 2/20/02 10:42 AM Page 1.
IMPOR T ANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USE. When using electrical appliances, basic safety precautions should always be followed, including the following: ❏ Read all instructions. Keep these instructions for future use. ❏ V erify that the voltage in your home corresponds to that of your appliance.
❏ Screw on blade assembly firmly . Injury can result if moving blades become exposed. ❏ If the jar should turn when the motor is switched ON, switch OFF immediately and tighten blade assembly . ❏ Do not leave blender unattended while it is operating.
2 Important Safeguards Inside Cover W elcome 2 Learning About Y our Blender 3 Using Y our Blender 4 Hints For Best Use 6 Cleaning 7 Servicing 7 One-Y ear Limited Warranty 8 How T o Obtain Warranty Service 9 T able of Contents Welcome Congratulations on your purchase of Sunbeam ® Model 4181 Blender .
3 K NOW Y OUR B LENDER A. Filler-Cap B. Lid C. Jar (48 ounce) D. Gaskets (small gasket for blade assembly , large gasket for jar collar) E. Blade Assembly (also called cutting blades) F . Base G.Control Panel H. Pulse Button- For instant control the pulse operates only as long as the button is held down.
4 H OW T O U SE Y OUR S UNBEAM ® B LENDER After unpacking the blender , wash everything except the blender base in hot, soapy water . Dry thoroughly . Do not place in dishwasher . Wipe the blender base with a damp cloth or sponge. Do not immerse the base in water .
5 6-Speed Speeds are Chop, Mix, Grate, Blend, Liquefy , and Pulse/Off. Pulse is a controlled cycle operation. This means it operates only while the button is held down. All other speeds are continuous cycle operation. They operate continuously at whatever speed is selected until the “Off” button is pressed.
6 H INTS FOR B EST U SE ❏ Processing hot foods or liquids in the blender may cause hot liquid to spurt out when the cover is removed. Always remove the filler-cap from the cover before blend- ing hot foods or liquids. (Please review Important Safeguards).
7 H OW TO C LEAN THE B LENDER 1. Unplug the blender from electrical outlet. 2. Wipe blender base, control panel, and cord with a damp cloth or sponge. T o remove stubborn spots, use a mild, non-abrasive cleanser . 3. T o clean jar , unscrew blade assembly and remove from jar .
8 1-Y EAR L IMITED W ARRANTY Sunbeam Products, Inc. (“Sunbeam”) warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. Sunbeam, at its option, will repair or replace this product or any component of the product found to be defective dur- ing this warranty period.
9 limitations may not apply to you. This warranty gives you specific legal rights and you may have the rights that vary by state, province and/or jurisdiction. How to obtain W arranty Service T ake the product to an Authorized Sunbeam Service Center .
D O NOT SEND THIS PRODUCT TO THE PLACE OF PURCHASE For product questions: Sunbeam Consumer Service P .O. Box 948389 Maitland, FL. 32794-8389 1.800.458.8407 www .sunbeam.com D O NOT SEND PRODUCT TO THE ABOVE ADDRESS ©2002 Sunbeam Products, Inc. All rights reserved.
An important point after buying a device Sunbeam 4181 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sunbeam 4181 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sunbeam 4181 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sunbeam 4181 you will learn all the available features of the product, as well as information on its operation. The information that you get Sunbeam 4181 will certainly help you make a decision on the purchase.
If you already are a holder of Sunbeam 4181, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sunbeam 4181.
However, one of the most important roles played by the user manual is to help in solving problems with Sunbeam 4181. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sunbeam 4181 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
