Instruction/ maintenance manual of the product R9010111 Barco
Go to page of 51
D-Cine Pr emie r e DP1 00 User’s manual R9010111 R9010118 R5976907/00 02/11/2005.
Barco nv Digital Cinema Noordl aan 5, B-8520 Kuurne Phone: +32 56.36.84.93 Fax: +32 56.36.88.62 E-mail: info.bdc.bps@barco.com Visit us at the web: www.
Federal Communications Commis sion (FCC Statement) This equipment has been tested and fou nd to comply with the limits for a class A digital device, pu rsuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equ ipment is operated in a commercial environment.
.
Table of con tents T ABLE OF CONTENTS 1 . S a f e t y I n s t r u c t i o n s .................................................................................................. 3 1.1 General . ................... ................... ............... ..
Table of con tents 2 R5976907 D-CINE PREMIERE DP100 02/11/2 005.
1. Sa fety Instruct ions 1. SAFETY INSTRUCTIONS Overview • General • W arning Risk of Fire • V entilation •S e r v i c e • Optical performances • Cabinet maintenance 1.1 General Summary • This equipment is intended for installation in a restricted access location.
1. Safety I nstructions 1.4 Service Protection on Servicing Attempt to alter the factory-set internal controls or to change other control settings not specially discussed in this manual can lead to permanent damage to the projection unit and cancellation of the warranty .
2. Check up the D-Cine Premie re DP100 2. CHECK UP THE D-CINE PREMIERE DP100 Which parts have t o be checked before starting up! • All covers in place and access doors closed • Power connection to wall outlet • Pressure in the cooling system of the DMD’s.
2. Check up the D-Cine Premiere DP100 2.2 Power Connection to W all Outlet Power plugg ed into wall outle t! Image 2-3 Power connection to W all out let 2.3 Pressure in the Cooling System Access to the manometer 1. Insert the lock key in the keyhole on the lamp house door and turn the key to the right to unlock the door .
2. Check up the D-Cine Premie re DP100 Max. Min. Image 2-5 Manome ter vi ew A rapid/significa nt drop in system pressure ind icates leakage. V erify whether the cir cuit sh ows any visible signs of liquid leakage. Refer the problem to a qualified Barco service center .
2. Check up the D-Cine Premiere DP100 8 R5976907 D-CINE PREMIERE DP100 02/11/2 005.
3. Starting up th e D-Cine Premi ere DP100 3. ST ARTING UP THE D-CINE PREMIERE DP100 Overview • Switching On the projector • Starting Image Projection 3.1 Switching On the projector H o wt os w i t c hO nt h ep r o j e c t o r 1. First, carry out the projector check up (see "Check up the D-Cine Premiere DP100", page 5).
3. Starting up the D- Cine Premier e DP100 A Image 3-1 Switching ON the p rojector A B D C MACRO 01 MACRO 07 MACRO 03 MACRO 05 MACRO 09 MACRO 11 MACRO 13 MACRO 02 MACRO 08 MACRO 04 MACRO 06 MACRO 10 M.
3. Starting up th e D-Cine Premi ere DP100 3.2 Starting Image Projectio n Overview • Using the Button control Panel • Using the T ouch Screen Panel 3.2.1 Usi ng the Button control Panel How to start image projection 1. Press the lamp ignition button (A).
3. Starting up the D- Cine Premier e DP100 3.2.2 Usi ng the T ouch Screen Panel How to start image projection 1. Start lamp ignition and opening dowser with the toggle buttons on the control panel (see "Using the Button control Panel", page 11 ) .
4. Cinema Oper ation 4. CINEMA OPERA TION Introduction This section explains how trained operators can use the projector for presenting cinema even ts such as first-run movies stored an a digital media storage device. The digital media storage device or cinema s erver is connected to one of the A or B i nput port on the input panel.
4. Cine ma Operation The assigned macro is activated resulting in a full ima ge display according the cinema processing procedu re (pre-defined by the producers).
5. Non-Cinema Oper ation 5. NON-CINEMA OPERA TION Overview • ACSAR 2 Input facilities • Monitoring ACSAR 2 selected Source • Selecting an ACSAR 2 Source • Remote Control Functionality Introduction This section explains how to d isplay “alternative content” ori ginating from a s tandard definition or high definition non-cin ema source.
5. Non-Cin ema Operatio n RGBHV Image 5-2 Monitoring ACSAR 2 output sig nal 5.3 Selecting an ACSAR 2 So urce About Macro’ s files For any display , the projector interprets incoming signal data according to a selectable “Macro file” defined at the time of installation or later (e.
5. Non-Cinema Oper ation The macro will be executed, resulting in a full image display of the source conne cted to the respective input module of the ACSAR 2. Because these macros are also assigned to a button on the c ontrol panel, the LED associated to the button will be On.
5. Non-Cin ema Operatio n 5.4.2 Remot e Control Functions Function of the RCU keys No function No function Menu keys No function Text On/Off Image Freeze ACSA R Input Image keys IR LED Macro keys Lamp On/Off Lens keys Pause On/Off Address key Image 5-6 Functi on of the R CU keys Ref.
5. Non-Cinema Oper ation Ref. Key name Description 10 Te x t O n / O f f Press to deactivate or reactivate the On Screen Dialog Boxes and Menus on projection screen (not applicable on the image preview monitor). 11 Image keys Use these keys to adjust the image display performances.
5. Non-Cin ema Operatio n 20 R5976907 D-CINE PREMIERE DP100 02/11/2 005.
6 . S w i t c h i n gO f ft h eD - C i n eP r e m i e r eD P 1 0 0 6. SWITCHING OFF THE D-CINE PREMIERE DP100 Procedure for switching off the projector • Close the dowser . • Switch off the lamp • Switch off the projector 6.1 Stop Image Projection How to stop image projecti on 1.
6 . S w i t c h i n gO f ft h eD - C i n eP r e m i e r eD P 1 0 0 A Image 6-2 Powerin g off the pr ojector 22 R5976907 D-CINE PREMIERE DP100 02/11/2 005.
7. Maintenance of the D- Cine Premier e DP100 7. MAINTENANCE OF THE D-CINE PREMIERE DP100 Overview • Lamp Unit replacement 7.1 Lamp Unit replaceme nt Overview • Removal of the Lamp House • Installation of the Lamp Unit 7.1.1 R emoval of the Lamp House 7.
7. Maintenance o f the D-Cine Pre miere DP100 A A B C C Image 7-2 Lamp casing removal 7.1.2 Insta llation of t he Lamp U nit 7.1.2.1 Installation of the la mp unit in the project or head How to inst all the la mp unit 1. Place the lamp unit on the lamp base in the projector , lining up the lamp unit foot with the slots on the base.
7. Maintenance of the D- Cine Premier e DP100 A A Image 7-4 Securing the l amp unit Before using the lamp, I nsert the lamp parameters via the D-Cine Co mmunicator software. 7.1.2.2 Closing the Lam p house door Installation o f a new lam p requires alignment of the lamp po sition when installed in th e projector head.
7. Maintenance o f the D-Cine Pre miere DP100 26 R5976907 D-CINE PREMIERE DP100 02/11/2 005.
8. C leaning Air Du ct 8. CLEANING AIR DUCT Overview • Cleaning the Blower on top of the Projector Head • Cleaning the Dust filters 8.1 Cleaning the Blower on top of the Projector Head This item should be clea ned approximately every six mon ths under normal enviro nment conditions.
8. Cleaning Air Duct Location of the air filters Air filters are placed at the front (A) and at the right side (B) of the projector head. A Image 8-2 Air filter at t he front of the project or B Image 8-3 Air filter at the side of the proj ector Removing the air fil ters 1.
9. I mage C ontrol 9. IMAGE CONTROL 9.1 Lens Focus test pattern How to select a test p attern for focus ali gnment 1. On the touch screen panel, starting from the Ho me screen, consecutively press touch button Home (1), Patterns (2) and More (3) .
9. Image Control Lens zoom can be perform ed without removing any cover. 9.2.1 Preparation of the projector Removing both s ide panels 1. Loosen the 2 screws on top side and t he 2 screws on the bottom side of the cover nearest the lens. (image 9-3 ) 2.
9. I mage C ontrol Image 9-5 Lens Zoom 9.2.3 Le ns Focus The focus adju stment is located just belo w the lens on th e left side (C on image 9-6 ). Remove the side cov er nearest the lens and open the dust sock around the lens. How to focus? 1. Loose fixation nut C1.
9. Image Control 2. Shift the image by turning the knurled torque knob (A2) clockwis e or counter clockwise until the image is on the desired position. 3. Secure this position by fastening nut A1 again. 4. For a horizontal shift, loosen first fixation nut B1.
10. Status of the D-Ci ne Premiere DP10 0 1 0 . S T A T U SO FT H ED - C I N EP R E M I E R ED P 1 0 0 Status lights On top of the projector head, rear side, stat us lights are built-in in t he corners. Wh en no errors, e.g. fan failure, overheatin g.
10. Status of the D-Ci ne Premiere DP1 00 Image 10-4 Status st art up Image 10-5 Status menu Overview of the Sta tus menu The status menu contains the following items: • T emperature overview • V oltage overview • Fan speeds overview 10.2 T emperature overview T o get DMD temperatures an d lamp house temperature 1.
10. Status of the D-Ci ne Premiere DP10 0 The switched mode power supply temperatures are listed. (image 10-1 1) - Switched mode power supply 1 primary side - Switched mode power supply 1 secondary si.
10. Status of the D-Ci ne Premiere DP1 00 Image 10-12 10.3 V oltage overview First voltage overvi ew 1. Push V o ltages . (image 10-13) The first voltage menu will be displayed. (image 10-1 4) The following voltages are monitored: - 5V standby - 12V standby -3 .
10. Status of the D-Ci ne Premiere DP10 0 The second voltage overview window will be displayed. (image 10-16) The following voltages are monitored: - Lamp fa n T op - Lamp fan Anode - Lamp fan Cathode - Electronic fans Image 10-15 Selecting second volta ge overview Image 10-16 Second voltage overview windo w Third voltage overvi ew 1.
10. Status of the D-Ci ne Premiere DP1 00 Image 10-19 Fan speed s elected Image 10 -20 Fan speed overvie w window Second fan speed window 1. Push More → .
11. D-Cine Premi ere DP100 Info 1 1. D-CINE PREMIERE DP100 INFO 1 1.1 Starting up the Menu How to select! 1. On the touch screen panel, starting from the Home screen, consecutively press touch button Home and Projector . (image 1 1-1) On the touch screen appears two fields, named the Lamp Info and the projector Properties.
11. D-Cine Premiere DP100 Info The second lamp info menu will be displayed. (image 1 1-5) The following information is given: Power Actual power supplied to the lamp Nominal p ower Nominal power to be.
11. D-Cine Premi ere DP100 Info 1 1.3.1 Projector properties sta rt up How to sta rt up 1. Push Properties . (image 1 1-8) The properties window opens. (image 1 1-9) Image 1 1-8 Projecto r propertie s selecte d Image 11-9 Properties w indow 1 1.3.2 IP addresses proj ector Use the D-Cine Commu nicator software to setup the IP addresses.
11. D-Cine Premiere DP100 Info The IP overview list will be displayed. (image 1 1-1 1) Projector IP IP address of built-in Barco controller D IM-PC . Subnet mask subnet mask address Default gateway De.
11. D-Cine Premi ere DP100 Info Image 1 1-12 IP cinema selected Image 11-13 IP cinema ov erview 1 1.3.4 Communication Overview 1. Push Commu nication .
11. D-Cine Premiere DP100 Info Image 1 1-16 T ouch p anel overvie w selected Image 11-17 T ouch panel software ver sion 44 R5976907 D-CINE PREMIERE DP100 02/11/2 005.
Index INDEX A Access doors 5 Check up 5 ACSAR 2 selected source 15 Monitoring 15 Air duct 27 Cleaning 27 B Blower 27 Cleaning 27 Button control panel 1 1 Image projection 1 1 C Check up 5 Access doors.
Index Image proj ection 21 Switching off 21 Projector 21 Switching On 9 Projector 9 T T ouch panel 33–34, 36–37, 39–43 Projector functions 39–43 Communication 43 IP addresses projector 41 IP c.
Revision Sheet To : Barco nv Digital Cin ema/Documentation Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.84.93, F ax: +32 56.36.88.62 E-mail: service.digitalcinema@barco.
An important point after buying a device Barco R9010111 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Barco R9010111 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Barco R9010111 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Barco R9010111 you will learn all the available features of the product, as well as information on its operation. The information that you get Barco R9010111 will certainly help you make a decision on the purchase.
If you already are a holder of Barco R9010111, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Barco R9010111.
However, one of the most important roles played by the user manual is to help in solving problems with Barco R9010111. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Barco R9010111 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
