Instruction/ maintenance manual of the product R9001490 Barco
Go to page of 93
BARCO PROJECTION SYSTEMS Date : 29082000 OWNER'S MANUAL Rev. : 03 ELM R12 R9001490 Art. No. : R5976072.
Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, October 2000. All rights reserved. Trademarks are the rights of their respective owners. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.
i-1 Table of Contents 5976072 BARCOELM R12 29082000 i TABLE OF CONTENTS TABLE OF CONTENTS ........................................................................................................ I - 1 SAFETY INSTRUCTION RELA TED TO ELM PROJECTORS ....
i-2 Table of Contents 5976072 BARCOELM R12 29082000 Optional Profile Sections ................................................................................................................................................................. 3 -11 Fork lift Supports .
i-3 Table of Contents 5976072 BARCOELM R12 29082000 ST ART UP OF THE ADJUSTMENT MODE ........................................................................ 6- 1 Adjustment Mode ........................................................................
i-4 Table of Contents 5976072 BARCOELM R12 29082000 How to adjust the input balance ? .............................................................................................. ................................................... 7-12 Geometry ....
i-5 Table of Contents 5976072 BARCOELM R12 29082000 SERVICE MODE .................................................................................................................. 9 -1 Service Mode .....................................................
i-6 Table of Contents 5976072 BARCOELM R12 29082000.
1-1 Safety 5976072 BARCOELM R12 05052000 1 SAFETY INSTRUCTION RELA TED T O ELM PROJECTORS Warnings To prevent personel injury The customer should never attempt to disassemble the lamp casing or to dispose of the lamp casing other than by returning it t o BARCO.
1-2 Safety 5976072 BARCOELM R12 05052000.
2-1 Packaging and Dimensions 5976072 BARCOELM R12 07012000 2 1 23 4 5 379 Pull T o open PACKAGING AND DIMENSIONS Projector Packaging Way of Packaging The projector can be packed in two different ways : - in a flightcase or - in carton. Flightcase The projector is packed in a flightcase without the lamp casing and the lens.
2-2 Packaging and Dimensions 5976072 BARCOELM R12 07012000 Lamp Packaging Way of Packaging The lamp casing is supplied as an individual item. The lamp can be packed in two different ways : - in a flightcase or - in carton.
2-3 Packaging and Dimensions 5976072 BARCOELM R12 07012000 1420 15 5 475 7 6 0 7 4 5 785 13 14 67 95 0 190,5 ( n o m i n a l ) 3 4 4 45 8 7 , 5 273 2 7 , 5 95 0 4 2 6 ( ) 1 1 0 TOP VIEW SIDE V IEW REF.
2-4 Packaging and Dimensions 5976072 BARCOELM R12 07012000.
3-1 Installation Guidelines 5976072 BARCO ELM R12 17102000 3 INST ALLA TION GUIDELINES Installation Guidelines Ambient Temperature Conditions Careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are crit ical to the optimum use of the projection system.
3-2 Installation Guidelines 5976072 BARCO ELM R12 17102000 Regardless of the type of screen used, it is important that your screen is of sufficient height to display the images at the as pect ratio intended to be used. If you have insufficient height, you will have to reduce the overall image size in order to display the full image on your screen.
3-3 Installation Guidelines 5976072 BARCO ELM R12 17102000 Scr een PD B Floor Proje ctor CD SH Opti c al axi s pro j ect ion len s SH SW SI D E V I E W BAC K VIEW Screen TOP VI EW SW Floor Tabl e/ Top.
3-4 Installation Guidelines 5976072 BARCO ELM R12 17102000 AIR I N IR O UT Sa fe ty ar ea f or air i n & ou t Image 7 Image 6 Image 6a Warning on Rotating the Projector When the lamp casing is installed, it is not allowed to rotate the projector clockwise when facing the lenses.
3-5 Installation Guidelines 5976072 BARCO ELM R12 17102000 Installing the projection lamp. 1 Unplug the projector from the wall outlet. 2 On the input side of the projector, remove the side by turning the 3 bolts a quarter turn counter clockwise (image 8).
3-6 Installation Guidelines 5976072 BARCO ELM R12 17102000 Image 14 Remark : No electrical connections have to be made while installing the lamp casing. All connections are automatically made while inser ting the lamp casing. Note : While starting up the projector, the electronics detect if a lamp is installed.
3-7 Installation Guidelines 5976072 BARCO ELM R12 17102000 Lenses Which Lens has to be selected. 1 Determine the required screen width. 2 Determine the approximate position of the projector in the projection room with regard to the screen and measure the projector-screen distance (PD).
3-8 Installation Guidelines 5976072 BARCO ELM R12 17102000 Installing the Projection Lens The projector is supplied without any lens. Remark : To install a projection lens, the projector must be switched ON. Installation of QLD lenses : Remove the foam rubber in the opening of the lens holder.
3-9 Installation Guidelines 5976072 BARCO ELM R12 17102000 310a.D RW Insert here the 'Insert card RCU' which you can cut out on the last page of this manual. Contact plate Battery Image 15 Insert the battery into the lower compartment and put the cover back.
3-10 Installation Guidelines 5976072 BARCO ELM R12 17102000 A A C Image 16 Image 17 Stacking two Projectors Two projectors can be stacked on each other without using extra tools or accessories.
3-11 Installation Guidelines 5976072 BARCO ELM R12 17102000 A B Image 19 Image 18 Rigging points and Accessories. Optional Profile Sections Two sets of Profile sections are available as option.
4-1 Connections 5976072 BARCOELM R12 05052000 4 RGB H / C V On 98 27910 RGB H / C V O n H ig h Ban dwidth R G B ANA LO G INP UT RGB H / C V On Hig h Bandwid th 5 C ABLE IN PUT O UT IN On 9840110 O UT .
4-2 Connections 5976072 BARCOELM R12 05052000 Lamp run time is 500 hours. Operating the lamp longer than 500 hours may damage the projector. Please replace the lamp. When OK (ENTER) is pressed to go on, the warning will be repeated every 30 min. The total lifetime of the lamp for a safe operation is 500 hours max.
4-3 Connections 5976072 BARCOELM R12 05052000 RGB H / C V On 98 2 7910 R G BH / C V O n High Bandwi dth RG B ANA LO G INPUT RGB H / C V O n High Bandwi dth 5 CABLE I NPU T O UT I N O n 984 0110 O UT I.
4-4 Connections 5976072 BARCOELM R12 05052000 R G B H / C V On 98 27910 R G BH / C V On Hig h Bandwi dth RG B ANA LOG IN PUT R G B H / C V On Hig h Ba ndw i dth 5 CA B L E INP U T O UT IN On 9840110 O.
4-5 Connections 5976072 BARCOELM R12 05052000 Select with é or ê then <ENTER> <EXIT> to return. Fixed RGB analog input (slot 1) Slot 1 has RGB analog input terminals (BNC) with separate Horizontal and Vertical sync (RGBHV) or with composite sync input (RGBS).
4-6 Connections 5976072 BARCOELM R12 05052000 Possible indication : RGB-SS [CS or HS&VS] = separate sync is composite sync or horizontal and vertical sync. RGB-SS [3LSS or CV] = separate sync is composite tri-level sync or composite video. Fixed 5-Input Slot (slot 2) Slot 2 has 5 BNC input terminals.
4-7 Connections 5976072 BARCOELM R12 05052000 S- V I DEO 98 27900 VI DEO LR AUDI O On On Video/S-video Input Module What can be connected to the Video input ? Composite video signals from a VCR, OFF air signal decoder, etc.
4-8 Connections 5976072 BARCOELM R12 05052000 Select with é or ê then <ENTER> <EXIT> to return. Select with é or ê then <ENTER> <EXIT> to return. Floati ng Non-Floating How to set the input priority ? 1 Press ADJUST or ENTER key to start up the Adjustment mode.
4-9 Connections 5976072 BARCOELM R12 05052000 R G B H / C V On 98 27910 Vert. sync Hor. sync or Composite sync Blue Green Red RGB Analog Input Module. What can be connected to these inputs ? RGB analog input terminals with separate Horizontal and Vertical sync inputs(RGB-HV), with Composite sync input(RGB-S) or with Sync signals on green(RGsB).
4-10 Connections 5976072 BARCOELM R12 05052000 Float i ng Non-Fl oat ing Select with é or ê then <ENTER> <EXIT> to return. Select with é or ê then <ENTER> <EXIT> to return. Possible indication : RGB-SS [CV] = separate sync is composite video signal H/C input.
4-11 Connections 5976072 BARCOELM R12 05052000 R- Y Y B- Y S On 98 2793 0 Sync Component Input Module. What can be connected to these inputs ? Connect your component signals (Y-luma, R-Y and B-Y), e.g. a professional VCR to the Component input module.
4-12 Connections 5976072 BARCOELM R12 05052000 RGB H / C V On 98 27 920 Fl o ati ng Non-Fl oat i ng Vert. 3 level sync Blue Green Red Hor. or composite 3 level sync Factory preset : J8 'separate sync' and J9 'normal sync'. RGB3S / RG3sB Input Module.
4-13 Connections 5976072 BARCOELM R12 05052000 Fl oat i ng Non-Fl oat i ng All input signals are always 75 ohm terminated, even in the "not selected" mode. How to select the RGB3S input : Key in the corresponding slot number on the RCU or the local keypad.
4-14 Connections 5976072 BARCOELM R12 05052000 How to select the Digital input : Key in the corresponding slot number on the RCU or the local keypad. Note : When a RCVDS05 is connected to the projector, the SDI input is available by keying in 85 or 86 on the RCU.
4-15 Connections 5976072 BARCOELM R12 05052000 RGB H / C V On 98 2 7910 R G BH / C V On Hig h Band wi dth RG B AN ALO G INPUT RGB H / C V On Hig h Ba ndw i dth 5 C A B LE IN P UT O UT IN On 9840 110 O.
4-16 Connections 5976072 BARCOELM R12 05052000 Connecting a VS05 to the projector The VS05 can switch up to 5 Composite Video sources, 3 Super Video sources and 1 RGB analog or component video source to the projector. In addition, the audio signal proper to the source, can be switched to an audio amplifier.
5-1 Getting Started 5976072 BARCOELM R12 17012000 5 GETTING ST ARTED Remote Control & Local Keypad Functionality This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the projector remotely . This remote control and local keypad is used for source selection, control, adaptation and set up.
5-2 Getting Started 5976072 BARCOELM R12 17012000 Terminology 1 Barco key : = selection key, to get direct access to the lens adjustment menus. 2 ADJ. : ADJUST key, to enter or exit the adjustment mode. 3A ddress key (recessed key), to enter the address of the projector (between 0 and 9).
5-3 Getting Started 5976072 BARCOELM R12 17012000 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 32a - + ? COLOR PHA S E SHA R PN T IN T BR I GH TN STANDBY ENT E R TEXT EX IT PAUSE $ Operating the Projector Switching on Use the power switch to switch on. When '0' is visible, the projector is switched off.
5-4 Getting Started 5976072 BARCOELM R12 17012000 Select with é or ê then <ENTER> <EXIT> to return. ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Select with é or ê then <ENTER> <EXIT> to return.
5-5 Getting Started 5976072 BARCOELM R12 17012000 LENS ADJUSTMENT ZOOM/FOCUS ZOOM with é or ê FOCUS with ç or è <ENTER> to Shift <EXIT> to return LENS ADJUSTMENT SHIFT SHIFT with é or.
5-6 Getting Started 5976072 BARCOELM R12 17012000 Using the RCU Pointing to the reflective screen Point the front of the RCU to the reflective screen surface. C e ilin g Sc r ee n IR s e n s o r RCU Quick On Screen Color change For quick change of the the on-screen color of the highlighted items.
5-7 Getting Started 5976072 BARCOELM R12 17012000 Hardwired Remote Input RCU used in a hardwired configuration. Plug one end of the remote cable in the connector on the bottom of the RCU and the second side in the connector in the front panel of the projector labelled 'Hardwired CTRL1'.
5-8 Getting Started 5976072 BARCOELM R12 17012000 Projector Address Why a projector address ? As more than one projector can be installed in a room, the separate projectors should be separately addressable with an RCU or computer. There for each projector has its own address.
5-9 Getting Started 5976072 BARCOELM R12 17012000 PROJECTOR ADDRESS 001 To continue using the RCU with that specific address, it is necessary to enter the same address with the digit buttons (address between 0 and 9) within 5 seconds after pushing the address key.
5-10 Getting Started 5976072 BARCOELM R12 17012000 Phase Control Use the control + and - button to adjust the phase of the displayed image to climate pixel jitter on computer generated images. Note : this contol has no effect on Video images. The Pause key.
6-1 Start up of the Adjustment Mode 5976072 BARCOELM R12 17012000 6 ST ART UP OF THE ADJUSTMENT MODE Adjustment Mode Start up All source parameters, picture tuning and geometry are made while in the 'Adjustment Mode'. Press the ADJUST or ENTER key to enter the 'Adjustment mode'.
6-2 Start up of the Adjustment Mode 5976072 BARCOELM R12 17012000 Error Invalid password <EXIT> to return When the password is correct, you gain access to the selected item. When the password is wrong. The error message "Invalid password" is displayed on the screen.
7-1 Random Access Adjustment Mode 5976072 BARCOELM R12 17012000 7 RANDOM ACCESS ADJUSTMENT MODE Random Access Mode Starting up Push the control disc up or down to highlight 'Random Access' and then press ENTER .
7-2 Random Access Adjustment Mode 5976072 BARCOELM R12 17012000 Picture Service Connecting a new Source. Before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most used sources.
7-3 Random Access Adjustment Mode 5976072 BARCOELM R12 17012000 Select with é or ê then <ENTER> <EXIT> to return. Load File Start up the Load File. 1 Push the cursor key é or ê to highlight 'Load' (menu 1). 2 Press ENTER to select.
7-4 Random Access Adjustment Mode 5976072 BARCOELM R12 17012000 Edit File What can be done with the Edit File menu ? The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult the source specification before entering the data.
7-5 Random Access Adjustment Mode 5976072 BARCOELM R12 17012000 Select with é or ê <ENTER> to toggle ç or è to change value <EXIT> to return EDIT FILE OPTIONS Source number 1 Clamp position [leading] Clamp delay 0 Clamp width 1 0 Field polarity [pos] Field select [both] Vertical refresh [sync] Vert.
7-6 Random Access Adjustment Mode 5976072 BARCOELM R12 17012000 Field Polarity : The field polarity function is used for interlaced images. Both rasters of the image could be shifted in a wrong way (double lines are visilble in the image). This can be corrected by forcing the field polarity to [neg] or [pos].
7-7 Random Access Adjustment Mode 5976072 BARCOELM R12 17012000 Select with é or ê then <ENTER> <EXIT> to return. How to change the characters ? 1 Push the cursor key ç or è to select the desired character (menu 4). 2 Change that character by pushing the cursor key é or ê .
7-8 Random Access Adjustment Mode 5976072 BARCOELM R12 17012000 Select with é or ê then <ENTER> <EXIT> to return. FILE SERVICE LOAD EDIT RENAME COPY DELETE OPTIONS DELETE FILE Filename Sr c Resolution ----------------------------------------------------- Video525.
7-9 Random Access Adjustment Mode 5976072 BARCOELM R12 17012000 PICTURE TUNING CTI [ON] COLOR TEMPERATURE GAMMA DECODING [EBU] DYNAMIC COLOR DEPTH NOISE REDUCTION INPUT BALANCE Select with é or ê then <ENTER> <EXIT> to return.
7-10 Random Access Adjustment Mode 5976072 BARCOELM R12 17012000 COLOR TEMPERATURE PROJECTOR WHITE COMPUTER 9300K VIDEO 6500K FILM 5400K BROADCAST 3200K CUSTOM BALANCE Select with é or ê then <ENTER> <EXIT> to return.
7-11 Random Access Adjustment Mode 5976072 BARCOELM R12 17012000 3 PICTURE TUNING CTI [ON] COLOR TEMPERATURE GAMMA DECODING [EBU] DYNAMIC COLOR DEPTH NOISE REDUCTION INPUT BALANCE GAMMA = 2.2 How to change the Gamma Value ? To change the gamma value : 1 Push the cursor key é or ê to highlight 'Gamma' (menu 1).
7-12 Random Access Adjustment Mode 5976072 BARCOELM R12 17012000 Select with é or ê then <ENTER> <EXIT> to return. PICTURE TUNING CTI [ON] COLOR TEMPERATURE GAMMA DECODING [EBU] DYNAMIC .
7-13 Random Access Adjustment Mode 5976072 BARCOELM R12 17012000 Select with é or ê then <ENTER> <EXIT> to return. RANDOM ACCESS ADJUSTMENT MODE FILE SERVICE PICTURE TUNING GEOMETRY GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING OPTIONS Select with é or ê then <ENTER> <EXIT> to return.
7-14 Random Access Adjustment Mode 5976072 BARCOELM R12 17012000 GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING ASPEC RATIO [4:3] OPTIONS Select with or then <ENTER> <EXIT> to return. GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING ASPEC RATIO [4:3] OPTIONS Select with or then <ENTER> <EXIT> to return.
7-15 Random Access Adjustment Mode 5976072 BARCOELM R12 17012000 Bo tto m bl an k i ng Top blankin g Right blan king Left blank ing Blanking What can be done ? Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen an d to hide or black out unwanted information (or noise).
7-16 Random Access Adjustment Mode 5976072 BARCOELM R12 17012000 GEOMETRY OPTIONS Use the same side keystone correction for all files ? [YES] <ENTER> to toggle <EXIT> to return Options Which Options are available within the Geometry menu ? It is possible to use the same keystone correction for all source.
8-1 Installation Mode 5976072 BARCOELM R12 05052000 8 INST ALLA TION MODE Installation Mode Start Up Push the cursor key é or ê to highlight 'Installation Mode' and then press ENTER .
8-2 Installation Mode 5976072 BARCOELM R12 05052000 Select with é or ê <ENTER> to toggle <EXIT> to return. Select with é or ê <ENTER> to toggle <EXIT> to return.
8-3 Installation Mode 5976072 BARCOELM R12 05052000 Configuration What can be done ? The way of physical installation of the projector can be defined to the projector.
8-4 Installation Mode 5976072 BARCOELM R12 05052000 Changing the Background Color To change the background color handle as follow : 1 Push the cursor key é or ê to highlight 'No signal' (menu 1). 2 Press ENTER to select. The 'No Signal' menu will be displayed (menu 2).
8-5 Installation Mode 5976072 BARCOELM R12 05052000 Internal Patterns What can be done with these internal patterns ? The projector is equipped with different internal patterns which can be used for measurment and alignment purposes.
8-6 Installation Mode 5976072 BARCOELM R12 05052000 Zoom/Focus/Shift/Tilt Within the displayed pattern it is possible to adjust the Zoom/Focus and the Shift.
8-7 Installation Mode 5976072 BARCOELM R12 05052000 BRIDGE Open with é Close with ê <EXIT> to return Select with é or ê then <ENTER> <EXIT> to return.
8-8 Installation Mode 5976072 BARCOELM R12 05052000 Menu Position What can be done ? The adjustment menus can be displayed in the corner or in the middle of the image. How to set up? 1 Push the cursor key é or ê to highlight 'Menu Position' (menu 1).
Service Mode 9-1 5976072 BARCOELM R12 05052000 9 Select with é or ê <ENTER> to toggle <EXIT> to return. LAMP Constant light output [YES] Serial number : R101111 Type : B400049 Run time :.
Service Mode 9-2 5976072 BARCOELM R12 05052000 ADD-INS LIGHT SENSOR : [INACTIVE] Select with é or ê <ENTER> to toggle/select <EXIT> to return. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION LAMP MORE.
Service Mode 9-3 5976072 BARCOELM R12 05052000 - Projector Run Time : gives the total run time since the first start up. All projectors leave the factory with a run time of approximately 24 hours. - Projector Serial number : indicates the fabrication number of the projector.
Service Mode 9-4 5976072 BARCOELM R12 05052000 Select with é or ê then <ENTER> <EXIT> to return. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ.
Service Mode 9-5 5976072 BARCOELM R12 05052000 Select with é or ê then <ENTER> <EXIT> to return. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION LAMP MORE... Select with é or ê then <ENTER> <EXIT> to return.
Service Mode 9-6 5976072 BARCOELM R12 05052000 Setting up the Baud rate To change the baud rate, handle as follow : 1 Push the cursor key é or ê to highlight 'Baudrate' (menu 1). The actual baud rate will be displayed. 2 Press ENTER to toggle between the available baudrates.
Service Mode 9-7 5976072 BARCOELM R12 05052000 Select with é or ê then <ENTER> <EXIT> to return. Select with é or ê <ENTER> to toggle <EXIT> to return.
Service Mode 9-8 5976072 BARCOELM R12 05052000 Select with é or ê then <ENTER> <EXIT> to return. Add-Ins How to get add ins ? The available add-ins can be activated by entering your personal access key when buying this function. Please contact your reseller.
Service Mode 9-9 5976072 BARCOELM R12 05052000 Select with é or ê then <ENTER> <EXIT> to return. I2C DIAGNOSIS DCA DECODER 1 2H # # # MOTOR DRIVER 1 A H # # # LIGHT SENSOR 1 CH # # # LAM.
Service Mode 9-10 5976072 BARCOELM R12 05052000.
Programmable Function Keys 10-1 5976070 BARCO ELM R12 05052000 10 PROGRAMMABLE FUNCTION KEYS Programmable Function Keys What can be done with these keys The five function keys on top of an adapted remote control can be programmed as short cut keys (quick access) to almost any adjustment menu.
Programmable Function Keys 10-2 5976070 BARCO ELM R12 05052000.
A-1 Appendix A : Standard Source Set Up Files 5976072 BARCOELM R12 261099 A ST ANDARD SOURCE SET UP FILES NAME : NAME OF FILE, CONTAINS THE SETTINGS RESOLUTION : IMAGE RESOLUTION, WHEN FOLLOWED BY ...I MEANS INTERLACED. FVERT HZ : VERTICAL FRAME FRE- QUENCY OF THE SOURCE FHOR KHZ : HORIZONTAL FREQUENCY OF THE SOURCE.
A-2 Appendix A : Standard Source Set Up Files 5976072 BARCOELM R12 261099 NAME RESOLUTION FVERT FHOR FPIX PTOT P A C T L T O T L A C T HZ KHZ MH Z PAM500 640 X 400 60,000 26,400 22,810 864 6 40 440 40.
A-1 Index 5976072 BARCOELM R12 17102000 i INDEX Symbols 800 Peripheral 8-2 A Add-Ins 9-8 Adjustment Mode 6-1 Installation Mode 8-1 Random Access Mode 7-1 Service Mode 9-1 S t art up adjustment mode 6-.
A-2 Index 5976072 BARCOELM R12 17102000 Available lenses 3-7 Cleaning the lens 3-8 Installing the Projection Lens 3-8 Lens Adjustments 8-5 Lens formulas 3-7 Lens Packaging 2-2 Quick Lens Adjustment 5-.
An important point after buying a device Barco R9001490 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Barco R9001490 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Barco R9001490 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Barco R9001490 you will learn all the available features of the product, as well as information on its operation. The information that you get Barco R9001490 will certainly help you make a decision on the purchase.
If you already are a holder of Barco R9001490, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Barco R9001490.
However, one of the most important roles played by the user manual is to help in solving problems with Barco R9001490. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Barco R9001490 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
