Instruction/ maintenance manual of the product SCFF-55 Summit
Go to page of 9
FELIX ST OR CH, INC. SUMMIT APPLIANCE DIVISION® INSTRUCTION MANUAL FOR MODEL: SCFF-55 ALL-FREEZER.
*Before Putting Into UsE* Before connecting the appliance to the power supply, leave it standing for about 2 hours, this will reduce the possibility of malfunctions in the cooling system due to transport handling. Clean the appliance thoroughl y; especially in the in terior (See Cleaning and Maintenance).
IMPORTANT If you bought this appliance to repla ce an old one equipped with a lock that cannot be opened fro m inside (lock, bolt), make sure that the lock is broken. This will make it impossib le for children to lock themselves inside the appliance and suffocate.
PLACING AND INSTALLATION It is important to make sure the applian ce is leveled evenly to prevent falling. Two spacers attached to the appliance mu st be fitted onto the upper edge of the condenser, thus preventing the applia nce from being installed too close to the wall.
Storing Fresh Foods Food to be stored in the freezer should be properly packed as to prevent mixing various moisture degrees and odors (in polyethylene bags or sheet, alum inum foil, wax paper, covered containers or bottles). Never store any inflammable, volatile or explosive substances.
Self-defrosting There is no need to defrost the fre ezer, because this appliance is self-defrosting. Cleaning the Appliance Disconnect the power supply before cleaning the appliance. Do not use coarse or aggressive cleaning ag ents as you can damage the surface.
Trouble-Shooting Guide During the service of your appliance, you can come across some trouble that in most cases result from improper handling of the appliance th at can easily be eliminated.
Door swing reversal ( Stainless steel models with towel bar handles do not have reversible doors.) If you find the direction of opening the door on your appliance inconvenient, you can change it. Holes on the opposite side have already been prepared at the factory 1.
Noise During the operation of the compressor, a liquid n oise is heard and when the compressor is not op erating a refrigerant flow is heard. This is a normal condition and it has no influence whatsoever on the lif etim e of the appliance.
An important point after buying a device Summit SCFF-55 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Summit SCFF-55 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Summit SCFF-55 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Summit SCFF-55 you will learn all the available features of the product, as well as information on its operation. The information that you get Summit SCFF-55 will certainly help you make a decision on the purchase.
If you already are a holder of Summit SCFF-55, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Summit SCFF-55.
However, one of the most important roles played by the user manual is to help in solving problems with Summit SCFF-55. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Summit SCFF-55 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
