Instruction/ maintenance manual of the product FS-56L Summit
Go to page of 11
FELIX STORCH, INC. SUMMIT APPLIANCE DIVISION ® INSTRUCTION MANUAL FOR MODELS: FS-60 FS-56L Thank you for putting your trust in our compan y and for purchasing this appliance. We hope it will successfully serve its purpose for m any years. A Freezer is used for freezing fresh f oods at a temperature of -25°C.
Before Putting Into Use Before connecting the applia nce to the power supply, l eave it standing for about 2 hours, which will reduce a possibility of malfunctions in the cooling system due to transport handling. Clean the appliance thoroughl y; especially in the in terior (See Cleaning and Maintenance).
Important To reduce the risk of fire, electrical shock, Warning! or in j ur y when usin g y our appliance, follow these basic precautions. Read all instructions be fore using the appliance If you bought this appliance to repla ce an old one equipped with a lock that cannot be opened from inside (lock, bolt), make sure that the lock is broken.
Placing and Installation Choosing the Right Place Place the appliance in a strong dry and regularly ventilated ro om . Allowed ambient Temperature depends on the model (c lass) of the appliance and is stated on the rating plate of the appliance.
Description of the Appliance Shelves If you want to remove the shelf slightly lift up the back part and pull it out. Quickly perishable foods should be stored on the back of the shelf which is the coldest part.
Operation Control The appliance is controlled with the thermostat knob, placed in the right upper part inside the appliance. Turn the knob clockwise from STOP (0 ) position towards 7 and backwards. Temperature Selection • When the freezer operates automatica lly, the interior tem perature is controlled by the thermostat.
Use Storing Fresh Foods • Foods to be stored in the freezer shou ld be properly packed as to prevent mixing various moisture degrees and odor s (in polyethylene bags or sheet, aluminum foil and covered containers). • Never store any inflammable, vol atile or explosive substances.
Changing the Di rection of Opening th e Door If the door opening direction does not su it you, it may be changed to the opposite side of the cabinet were holes are already made. • Before changing the door the front side of the appliance m ust be slightly raised.
Maintenance and Cleaning Manual Defrosting of the All-Freezer When the frost and ice layer in the fr eezer is 1/8” thick you should clean the freezer. • First turn the thermostat knob to th e STOP (0) position and disconnect the power supply. Empty the compartment and m ake sure that the packages remain frozen.
Switch Off the Applian ce When Not in Use If you do not intend to use the appliance for a long period of time set the thermostat knob to the S TOP (0) positi on and disconnect the power supply. Then take out the foods and defrost and clean the appliance.
Noise Cooling in the freezing appliances is enabled by the comp ressor, this pro duces noise. How noisy the appliance is depends on where it is placed, how it’s used and how old the appliance is. • After starting the appliance, the operation of the compressor may be louder and this does not mean something is wrong with the appliance.
An important point after buying a device Summit FS-56L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Summit FS-56L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Summit FS-56L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Summit FS-56L you will learn all the available features of the product, as well as information on its operation. The information that you get Summit FS-56L will certainly help you make a decision on the purchase.
If you already are a holder of Summit FS-56L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Summit FS-56L.
However, one of the most important roles played by the user manual is to help in solving problems with Summit FS-56L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Summit FS-56L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
