Instruction/ maintenance manual of the product Legacy (2010) Subaru
Go to page of 450
2010 LEGACY/OUTBACK Owner’ s Manual MSA5M1004A A2460BE-A Issued May 2009 Printed in USA 05/09 2010A 2010 LEGACY/OUTBACK Owner’ s Manual FUJI HEA VY INDUSTRIES L TD.
Foreword Congratulations on choosing a SUBARU vehicle. This Owner ’ s Manual has all the information necessary to keep your SUBARU in excellent condition and to properly maintain the emission control system for minimizing emission pollutants. We urge you to read this manual carefully so that you may understand your vehicle and its operation.
This manual describes the following types of the Legacy series. 1) Legacy 2) Outback.
.
W arranties & W arranties for U.S.A. All SUBARU vehicles distributed by Subaru of America, Inc. and sold at retail by an authorized SUBARU dealer in the United States come with the following warranties: . SUBARU Limited Warranty . Emission Control Systems Warranty .
2 Chapter 12: Specifications This chapter informs you about the dimen- sions and capacities of your SUBARU. Chapter 13: Consumer information and Reporting safety defects This chapter informs you about T ire information, Uniform tire quality grading standards and Reporting safety defects.
Abbreviation Meaning HID High intensity discharge INT Intermittent LA TCH Lower anchors and tethers for children LED Light emitting diode LSD Limited slip differential MIL Malfunction indicator lamp M.
4 Mark Name Fan speed Instrument panel outlets Instrument panel outlets and foot outlets Foot outlets Windshield defroster and foot outlets Windshield defroster Rear window defogger/Out- side mirror d.
. The SRS airbags deploy with consi der ab le sp eed an d force . Occupants who are out of proper position whe n th e SRS ai rbag deploys could suffer very serious injuries.
6 They could accidentally injure themselves or others through inadvertent operation of the ve- hicle. Also, on hot or sunny days, the temperature in a closed ve- hicle could quickly become high enough to cause severe or pos- sibly fatal injuries. . Help prevent children, adults or animals from locking themselves in the trunk.
Please don ’ t drink and drive. Drunken dr iving is one of the most frequent causes of accidents. Since alco- hol affects all people differently , you may have consumed too much alcohol to drive safely even if the level of alcohol in your blood is below the legal limit.
8 & Modification of your vehicle CAUTION Y our vehicle should not be modified other than with genuine SUBARU parts and accessories. Other types of modifications could affect its performance, safety or durabi lity , and may even violate governmental regulations.
T able of contents Seat, seatbelt and SRS airbags 1 Keys and doors 2 Instruments and controls Climate control 4 Audio 5 Interior equipment 6 Starting and operating 7 Driving tips 8 In case of emergenc.
10 Illustrated index & Exterior 1) Engine hood lock release (page 1 1-7) 2) Headlight switch (page 3-27) 3) Bulb replacement (page 1 1-50) 4) Wiper switch (page 3-32) 5) Moonroof (page 2-28) 6) Ro.
1) Rear window defogger button (page 3-34) 2) Fuel filler lid and cap (page 7-3) 3) Child safety locks (page 2-20) 4) T owing hook (page 9-12) 5) Tie-dow n hooks (page 9-13) 6) Trunk lid (page 2-24) 7.
12 & Interior ! Passenger compartment area 1) Lower anchorages for child restraint system (page 1-33) 2) Seatbelt (page 1-12) 3) Center console (page 6-6) 4) Front seat (page 1-2) 5) Rear seat (pa.
1) T op tether anchorages (page 1-35) 2) Cargo area light (page 6-3) 3) Rear center seatbelt (page 1-18) 4) Cargo area cover (page 6-15) 13 – CONTINUED –.
14 1) Shift lever (MT) (page 7-16)/Select lever (A T and CVT) (page 7-19) 2) Climate control (page 4-1) 3) Audio (page 5-1) 4) Navigation system (Refer to the Owner ’ s Manual supplement for the nav.
& Instrument panel 1) Door locks (page 2-5) 2) Electronic parking brake switch (page 7-34) 3) Hill Holder switch (page 7-35) 4) Trunk lid opener switch (page 2-24) 5) V ehicle Dynamics Control OFF.
16 & Light control and wiper control levers/switches 1) Windshield wiper (page 3-31) 2) Mist (page 3-32) 3) Windshield washer (page 3-33) 4) Rear window wiper and washer switch (page 3-34) 5) Wipe.
& Combination meter ! U.S.-spec. models 1) Trip meter A/B selection and trip meter reset knob (page 3-6) 2) T achometer (page 3-7) 3) Trip meter and odometer (page 3-6) 4) Speedometer (page 3-6) 5.
18 ! Canada-spec. models 1) Trip meter A/B selection and trip meter reset knob (page 3-6) 2) T achometer (page 3-7) 3) Trip meter and odometer (page 3-6) 4) Speedometer (page 3-6) 5) Multi f unction d.
& W arning and indicator lights Mark Name Page Seatbelt warning light 3-10 Front passenger ’ s seatbelt warning light 3-10 SRS airbag system warning light 3-1 1 CHECK ENGINE warn- ing light/Malf.
20 Function settings A SUBARU dealer can change the settings of the functions shown in the following table to meet your personal requirements. Contact the nearest SUBARU dealer for details.
Front seats ........................................................... 1- 2 Manual seat ........................................................ 1 -3 Power seat (if equipped) ...................................... 1 -4 Head restraint adjustment .....
1-2 Seat, seatbelt and SRS airbags Front seats W ARNING . Never adjust the seat while driv- ing to avoid the possibi lity of loss of vehicle control and of personal injury . . Before adjusting the seat, make sure the hands and feet of rear seat passe ngers or cargo are clear of the adjusting mechan- ism.
According to accident statistics, chil dr en are s afer whe n prope rly restrained in the rear seating posi- tions than in the front seating posi- tions. For instructions and precau- tions concerning child restraint sys- tems, refer to “ Child restraint sys- tems ” F 1-25.
1-4 Seat, seatbelt and SRS airbags ! Seat height adjustment (driver ’ s seat) The height of the seat can be adjusted by moving the seat cushion adjustment lever up and down. When the lever is pushed down, the seat is lowered. When the lever is pulled up, the seat rises.
the seat cushion angle or seat cushion height. 2) Seat cushion angle control switch T o adjust the seat cushion angle, pull up or push down the front end of the control switch. 3) Seatback angle (reclining) control switch T o adjust the angle of the seatback, move the control switch.
1-6 Seat, seatbelt and SRS airbags T o remove: While pressing the release button, pull out the head restraint. T o install: Install the head restraint into the holes that are located on the top of the seatback until the head restraint locks. W ARNING .
. Do not put anything on the seat which insulates against heat, such as a blanket, cushion, or similar items. This may cause the seat heater to overheat. NOTE Use of the seat heater for a long period of time while the engine is not running can cause battery discharge.
1-8 Seat, seatbelt and SRS airbags & Reclining the seatback (Out- back) W ARNING T o prevent the passenger from slid- ing under the seatbelt in the event of a collision, always put the seatback in the upri ght pos ition wh ile the vehicle is in motion.
CAUTION The rear seatback may fold down quickly due to the internal spring. Hold the seatback while pulling the release lever to slow it down. ! Legacy CAUTION Before folding down the rear seats, make sure that no one is sitting and nothing is placed on the rear seats.
1-10 Seat, seatbelt and SRS airbags & Head restraint adjustment Both the rear window side seats and the rear center seat are equipped with head restraints.
! Rear center seating position CAUTION The head restraint is not intended to be used at the lowest position. Before sitting on the seat, raise the head restraint to the extended posi- tion. A) When not used (retracted position) B) When used (extended position) 1) Head restraint 2) Release button T o raise: Pull the head restraint up.
1-12 Seat, seatbelt and SRS airbags Armrest T o lower the armrest, pull on the top edge of the armrest. W ARNING T o avoid the possibility of serious injury , passengers must never be allowed to sit on the center armrest while the vehicle is in motion.
According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seat- ing positions. For instructions and precautions concerning the child restraint system, refer to “ Child restraint systems ” F 1-25.
1-14 Seat, seatbelt and SRS airbags Retractor (ALR) mode. When the child restraint system is re- moved, make sure that the seatbelt retracts fully and the retractor returned to the Emergency Locking Retractor (ELR) mode.
turned ON next time, however, the complete sequence of the warning operation resumes. For further details about canceling the warning operation, please contact your SUBARU dealer . If the re is no passenger on the front passenger ’ s seat, the seatbelt warning device for the front passenger ’ s seat will be deac tiv ated.
1-16 Seat, seatbelt and SRS airbags W ARNING Never place the shoulder belt under the arm or behind the back. If an accident occurs, this can increase the risk or severity of injury . CAUTION Metallic parts of the seatbelt can become very hot in a vehicle that has been closed up in sunny weath- er; they could burn an occupant.
! Adjusting the front seat shoulder belt anchor height The shoulder belt anchor height should be adjusted to the position best suited for the driver/front passenger . Always adjust the anchor height so that the shoulder belt passes over the middle of the shoulder without touching the neck.
1-18 Seat, seatbelt and SRS airbags 4. T o make the lap part tight, pull up on the shoulder belt. 5. Place the lap belt as low as possible on your hips, not on your waist.
W ARNING Be sure to fasten both tongue plates to the respective buckles. If the seatbelt is used only as a shoulder belt (with the connector ’ s tongue plate not fastened to the connec- tor ’ s buckle on the right-hand side), it cannot properly restrain the wear- er in position in an accident, possi- bly resul ting in serious injur y or death.
1-20 Seat, seatbelt and SRS airbags 4. After fastening the seatbelt, make sure that the “ ” mark on the connector (tongue) and the “ ” mark on the buckle face outwards. 5. Insert the center seatbelt tongue plate into the center seatbelt buckle marked “ CENTER ” on the left-hand side until it clicks.
1. Insert a key or other hard pointed object into the slot in the connector (buckle) on the right-hand side and push it in, and the connector (tongue) plate will disconnect from the buckle. 2. Allow the retractor to roll up the belt. Y ou should hold the webbing end and guide it back into the retractor while it is rolling up.
1-22 Seat, seatbelt and SRS airbags & Seatbelt maintenance T o clean the seatbelts, use a mild soap and lukewarm water . Never bleach or dye the belts because this could seriously affect their strength.
. If the front seatbelt retractor assem- bly or surrounding area has been damaged, contact your SUBARU dealer as soon as possible. . When you sell your vehicle, we urge you to explain to the buyer that it has seatbelt pretensioners by alerting him to the contents of this section.
1-24 Seat, seatbelt and SRS airbags system weight sensor . Front passenger ’ s occupant detection control module . Front passenger ’ s frontal airbag ON and OFF indicator . All related wiring W ARNING If the warning light exhibits any of the following conditions, there may be a malfunction in the seatbelt pretensioners and/or SRS airbag system.
. Modification of the suspension system or front end structure. . Installation of a tire of different size and construction from the tires specified on the vehicle placard attached to the door pillar or specified for individual vehicle models in this Owner ’ s Manual.
1-26 Seat, seatbelt and SRS airbags W ARNING Never let a passenger hold a child on his or her lap while the vehicle is moving. The passenger cannot pro- tect the child from injury in a colli- sion, because the child will be caught between the passenger and objects inside the vehicle.
installing a child restraint system. Some types of child restraints might not be able to be secured firmly due to projection of the seat cushion. In this seating position, you should use only a child restraint system that has a bottom base that fits snugly against the contours of the seat cushion and can be securely retained using the seatbelt.
1-28 Seat, seatbelt and SRS airbags & Choosing a child restraint system Choose a child restraint system that is appropriate for the child ’ s age and size (weight and height) in order to provide the child with proper protection.
or around the child restraint system following the instructions provided by its manufacturer . 3. Insert the tongue plate into the buckle until you hear a click.
1-30 Seat, seatbelt and SRS airbags NOTE When the child restraint system is no longer in use, remove it and restore the ELR function of the retractor . That function is restored by retracting the seatbelt fully . ! Installing forward facing child re- straint 1.
Legacy Outback 8. If the child restraint system requires a top tether, latch the hook onto the top tether anchor and tighten the top tether . For additional instructions, refer to “ To p tether anchorages ” F 1-35.
1-32 Seat, seatbelt and SRS airbags CAUTION When you install a child restraint system, follow the manufacturer ’ s instructions supplied with it. After installing the child restraint system, check to ensure that it is held securely in position.
& Installation of child restraint systems by use of lower and tether anchorages (LA TCH) W ARNING . Child restraint systems and seat- belts can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child. Check the child restraint system before you place a child in it.
1-34 Seat, seatbelt and SRS airbags the rear seat window-side seating posi- tions. For each window-side seating posi- tion, two lower anchorages are provided.
Peel off the anchorage cover from the select ed si de of the rear se atback to expose the anchorages (bars) to be used for installation of the child restraint system.
1-36 Seat, seatbelt and SRS airbags instructions by the child restraint system manufacturer . Since a top tether can provide additional stability by offering another connection between a child restraint system and the vehicle, we recommend that you use a top tether whenever one is required or avail- able.
restraint while pressing the release button. Store the head restraint in the trunk. Avoid placing the head restraint in the passen- ger compartment to prevent it from being thrown around in the passenger compart- ment in a sudden stop or a sharp turn.
1-38 Seat, seatbelt and SRS airbags 3. Fasten the top tether hook of the child restraint system to the appropriate upper anchorage. 4. Tighten the top tether securely . *SRS airbag (Supplemental Restraint System airbag) *SRS: This stands for supplemental re- straint system.
refer to “ Seatbelts ” F 1-12. . Do not sit or lean unnecessarily close to the SRS airbag. Because the SRS airbag deploys with considerable speed – faster than the blink of an eye – and force to protect in high speed collisions, the force of an airbag can injure an occupant whose body is too close to SRS airbag.
1-40 Seat, seatbelt and SRS airbags seat properly restrained at all times in a child restraint device or in a se atbe lt, whi cheve r is appropriate for the child ’ s age, height and weight. Secure ALL types of child re- straint devices (including for- ward facing child seats) in the REAR seats at all times.
! Components 1) Front sub sensor (right-hand side) 2) Front sub sensor (left-hand side) 3) SRS airbag system warning light 4) Frontal airbag module (driver ’ s side) 5) Front passenger ’ s frontal.
1-42 Seat, seatbelt and SRS airbags 1) Curtain airbag sensor (left-hand side) 2) Curtain airbag module (left-hand side) 3) Curtain airbag module (right-hand side) 4) Front passen ger ’ s occ upant d.
& SUBARU advanced frontal airbag system Y our vehicle is equipped with a SUBARU advanced frontal airbag system that com- plies with the new advanced frontal airbag requirements i n the amended Federal Motor V ehicle Safety Standard (FMVSS) No. 208.
1-44 Seat, seatbelt and SRS airbags W ARNING Never hold a child on your lap or in your arms. The SRS airbag deploys with considerable force and can injure or even kill the child.
W ARNING Do not attach accessories to the windshield, or fit an extra-wide mir- ror over the rear view mirror. If the SRS airbag deploys, those objects could become projectiles that could seriously injure vehicle occupants. ! Driver ’ s SRS frontal airbag The driver ’ s SRS frontal airbag uses a dual stage inflator .
1-46 Seat, seatbelt and SRS airbags er immediately if the SRS airbag system warning light illuminates. If your vehicle has sustained impact, this may affe ct the p roper functi on of t he SUBARU advanced frontal airbag system. Have your vehicle inspected at your SUBARU dealer .
facing child restraint system and a small child is restrained with it. (See W ARNING that follows.) . The seat is equipped with a booster seat and a small child is in the booster seat. (See W ARNING that follows.) . The seat is relieved of the occupant load for a time exceeding the predeter- mined monitoring time period.
1-48 Seat, seatbelt and SRS airbags sition and seatback of front passenger ’ s seat are locked into place securely by moving the seat back and forth.
. Ensure that there is no article, book, shoe, or other object trapped under the seat, at the rear of the seat, or on the side of the seat. . Ensure that the backward-forward po- sition and seatback of front passenger ’ s seat are locked into place securely by moving the seat back and forth.
1-50 Seat, seatbelt and SRS airbags The SRS airbag can function only when the ignition switch is in the “ ON ” position. The SUBARU advanced f rontal airbag system is designed to determine the act.
! Examples of accident in which the driver ’ s/driver ’ s and front passen- ger ’ s SRS frontal airbag(s) will most likely deploy . A head-on collision against a thick con- crete wall at a vehic.
1-52 Seat, seatbelt and SRS airbags ! Examples of the types of accidents in which deployment of the driver ’ s/driver ’ s and front passenger ’ s SRS frontal airbag(s) is unlikely to occur. 1) The vehicle strikes an object, such as a telephone pole or sign pole.
! Examples of the types of accidents in which the driver ’ s/driver ’ s and front passenger ’ s SRS frontal airbag(s) will basically not deploy .
1-54 Seat, seatbelt and SRS airbags window and supplements the seatbelt by reducing the impact on the occupant ’ s head. W ARNING The SRS side airbag and SRS curtain airbag are designed as only a supplement to the primary protec- tion provided by the seatbelt.
W ARNING Do not rest your arm on either front door or its internal trim. It could be injured in the event of SRS side airbag deployment. W ARNING . Never allow a child to kneel on the front passenger ’ s seat facing the side window or to wrap his/ her arms around the front seat seatback.
1-56 Seat, seatbelt and SRS airbags near the SRS side airbags. In the event of the SRS side airbag deployment, they could be pro- pelle d dange rousl y to ward th e vehicle ’ s occupants and cause injuries.
impa ct force , is loc ated in t h e airb ag control module. If one of the center pillar impact sensors and the impact sensor that is located in the airbag control module together sense an impact forc.
1-58 Seat, seatbelt and SRS airbags ! Example of the type of accident in which the SRS side airbag and SRS curtain airbag will most likely de- ploy (Legacy). A severe side impact near the front seat activates the SRS side airbag and SRS curtain airbag.
! Examples of the types of accidents in which the SRS curtain airbag will most likely deploy (Outback). 1) A severe side impact near the front seat or the rear seat activates the SRS curtain airbag.
1-60 Seat, seatbelt and SRS airbags ! Examples of the types of accidents in which it is possible that the SRS side airbag and the SRS curtain airbag will deploy (Outback).
! Examples of the types of accidents in which the SRS side airbag and SRS curtain airbag are unlikely to deploy . 1) The vehicle is involved in an oblique side-on impact. 2) The ve hicle is inv olved in a side-o n impact in an area outside the vicinity of the passenger compartment.
1-62 Seat, seatbelt and SRS airbags ! Examples of the types of accidents in which the SRS side airbag and SRS curtain airbag will basically not deploy . 1) The vehicle is involved in frontal collision with another vehicle (moving or station- ary). 2) The vehicle is struck from behind.
. Airbag control module (including im- pact sensors (all models) and rollover sensors (Outback)) . Frontal airbag module (driver ’ s side) . Frontal airbag module (front passen- ger ’ s side) . Side airbag sensor (center pillar right- hand side) .
1-64 Seat, seatbelt and SRS airbags CAUTION If you need service or repair in areas of your vehicle listed in the follow- ing, have an authorized SUBARU dealer perform the work. The SRS airbag control module, impact sen- sors and airbag modules are stored in these areas.
. Installation of additional electri- cal/electronic equipment such as a mobile two-wa y radio on or near the SRS airbag s ystem components and/or wiring is not advi sabl e. Thi s coul d i nter fere with prop er operati on of the SRS airbag system. CAUTION Do not perform any of the following modifi cati ons.
—————————————— ——————————————— ——————————— —————————————— ———————————.
Keys ..................................................................... 2-2 Key number ........................................................ 2 - 2 Immobilizer .......................................................... 2-3 Security ID plate .....
2-2 Keys and doors Keys 1) Master key 2) Submaster key 3) V alet key 4) Key number plate 5) Security ID plate Three types of keys are provided for your vehicle: Master key , submaster key and valet key . The master key and submaster key fit all locks on your vehicle.
Immobilizer The immobilizer system is designed to prevent an unau thorized person f rom starting the engine. Only keys registered with your vehicle ’ s immobilizer system can be used to operate your vehicle.
2-4 Keys and doors (Canada-spec. models). & Security indicator light The security indicator light deters potential thieves by indicating that the vehicle is equipped with an immobilizer system.
Door locks & Locking and unlocking from the outside T o lock the driver ’ s door from the outside with the key , turn the key toward the rear. T o unlock the door , turn the key toward the front. Lift the outside door handle to open an unlocked door .
2-6 Keys and doors & Locking and unlocking from the inside W ARNING Keep all doors locked when you drive, especially when small chil- dren are in your vehicle. Along with the proper use of seat- belts and child restraints, locking the doors reduces the chance of being thrown out of the vehicle in an accident.
lights do not turn off automatically . T o turn off the lights, it is necessary that each door is completely closed. The operational/non-operational setting of this function can be changed by a SUBARU dealer . Contact the nearest SUBARU dealer if you would like to change the setting.
2-8 Keys and doors NOTE . The factory setting (default setting) for this function is set as “ operational ” . . When leaving the vehicle, make sure you are holding the key before locking the doors.
facility or electronic equipment emitting strong radio waves such as a power plant, broadcast station, TV tower , or remote controller of home electronic appliances. NOTE The remote keyless entry system does not operate when the key is inserted in the ignition switch.
2-10 Keys and doors & Opening the trunk lid (Legacy) The trunk lid opens when the “ ” button is pres sed contin uously for at least 2 seconds. An electronic chirp will sound twice and the turn signal lights will flash twice. & Unlocking the rear gate (Outback) Pressing the “ ” button unlocks the rear gate.
& Selecting audible signal op- eration Using an electronic chirp, the system will give you an audible signal when the doors lock and unlock. If desired, you may turn the audible signal off. T o deactivate the audible signal, perform the following procedure.
2-12 Keys and doors 3. Remove the transmitter case from the key head. 4. Open the transmitter case by releasing the hooks. 1) Negative ( − ) side facing up 5. Replace the old battery with a new battery (Type CR1620 o r equiv alent) making sure to install the new battery with the negative ( − ) side facing up.
Progr am ming tr ansmitt er codes int o system: Key unit tag T ransmitter circuit board T o register a new transmitter with the remote keyless entry system, it is neces- sary to program the transmitter ’ s code (identification number) into the system.
2-14 Keys and doors NOTE . When part 4 of the procedure is completed, an electronic tone will sound for 30 seconds. . If you do not perform the operations in part 4 within 15 seconds, an error will occur and the electronic tone will not sound. In this event, perform the registration steps again beginning with part 3 of the procedure.
NOTE If you do not start entering the number using the lock switch before the elec- tronic tone stops sounding, an error will occur . In this event, perform the procedure again beginning with part 3.
2-16 Keys and doors Alarm system The alarm system helps to protect your vehicle and valuables from theft. The horn sounds and the turn signal lights flash if someone attempts to break into your vehicle. The system can be armed and disarmed with the remote transmitter .
& Arming the system ! T o arm the system using remote transmitter 1. Close all windows and the moonroof (if equipped). 2. Remove the key from the ignition switch. 3. Open the doors and get out of the vehicle. 4. Make sure that the engine hood (and the trunk lid (Legacy)) are locked.
2-18 Keys and doors start flashing rapidly . After rapid flashing for 30 seconds (standby time), the security indicator light will then flash slowly (twice approximately every 2 seconds), indicat- ing that the system has been armed for surveillance. NOTE .
! Arming the system CAUTION In passive mode, the system will automatically activate the alarm but WILL NO T au tomati cally lo ck the doors. In order to lock the doors you must either lock them as in- dicated in step 4 below or with the key once they have been closed.
2-20 Keys and doors causes the horn to sound and the turn signal lights to flash for a short time when the sensed impact is weak, but it warns of a strong impact or multiple impacts by sounding the horn and flashing the turn signal lights, both lasting approximately 30 seconds.
Windows W ARNING T o avoid serious personal inju ry caused by entrapment, always con- form to the following instructions without exception. . When operating the power win- dows, be extre mely c aref ul to prevent anyone ’ s fingers, arms, neck, head or other objects from being caught in the window.
2-22 Keys and doors held. For some models, this switch also has a one-touch auto up function that allows the window to be closed fully without holding the switch. Pull the switch up until it clicks and release it, and the window will fully close. T o stop the window halfway , press the switch down lightly .
! Locking the passengers ’ windows 1) Lock 2) Unlock T o lock: Press the lock switch. When the lock switch is in the pressed “ LOCK ” position, the passengers ’ windows cannot be opened or closed.
2-24 Keys and doors & Initialization of power win- dow If the vehicle ’ s battery is disconnected due to situations such as battery or fuse replacement, the following functions are deactivated. . One-touch auto up/down function . Anti-entrapment function Initialize the power window in the following procedure to reactivate such functions.
! T o lock and unlock the trunk lid opener switch When you entrust your vehicle key to another person, you can lock the trunk lid opener switch to prevent items in the trunk from being stolen. T o lock the trunk lid opener switch, per- form the following procedure.
2-26 Keys and doors ! Inspection Perform the following steps at least twice a year to check the release handle for correct operation. 1. Open the trunk lid. 2. Use a flat-head screwdriver with a thin blade. Slide the flat-head screwdriver blade from the slit aperture of the lock assembly fully to the end until you hear a click.
Rear gate (Outback) The rear gate can be locked and unlocked using any of the following systems. . Power door locking switch: Refer to “ Power door locking switches ” F 2-7. . Remote keyless entry system: Refer to “ Remote keyless entry system ” F 2-8.
2-28 Keys and doors NOTE If the rear gate cannot be unlocked due to a discharged vehicle battery , a malfunction in the door locking/unlock- ing system or other causes, you can unlock it by manually operating the rear gate lock release lever .
& Moonroof switches ! Tilting moonroof 1) Raise 2) Lower The raising function will only operate when the moonroof is fully closed. The lowering function will only operate when the moon- roof is raised. Press the rear side of the “ UP/DOWN ” switch to raise the moonroof.
2-30 Keys and doors CAUTION Never attempt to test this function using fingers, hands or other parts of your body . & Sun shade The sun shade can be slid forward or backward by hand while the moonroof is closed. If the moonroof is opened, the sun shade also moves back.
Ignition switc h ..................................................... 3-3 LOCK .................................................................. 3 - 3 A cc..................................................................... 3 - 4 O N ..............
Instruments and controls Light control switch ........................................... 3-2 7 Headlights. ......................................................... 3 -2 7 High/low beam change (dimmer) ......................... 3 -2 8 Headlight flasher .
Ignition switch W ARNING . Never turn the ignition switch to “ LOCK ” while the vehicle is being driven or towed because that will lock the steering wheel, preventing steering control. And when the engine is turned off, it takes a much greater effort than usual to steer .
3-4 Instruments and controls & Acc In this position the electrical accessories (radio, accessory power outlet, etc.) can be used. & ON This is the normal operating position after the engine is started. & ST ART CAUTION Do not turn the ignition switch to the “ ST ART ” position while the engine is running.
Hazard warning flasher The hazard warning flasher is used to warn other drivers when you have to park your vehicle under emergency conditions. The hazard warning flasher works with the ignition switch in any position. T o turn on the hazard warning flasher, press the hazard warning button on the instrument panel.
3-6 Instruments and controls “ ” on the trip meter display . The display can be switched as shown in the following illustration by pressing the trip knob. * 1 : “ ” or “ ” and “ ” or “ ” cannot be displayed when the ignition switch is in the “ ON ” position.
possible to switch bet ween the A trip meter and B trip meter indications while the odometer/trip meter is lit up. If you do not press the trip knob within 10 seconds of illumination of the odometer/trip meter, the odometer/trip meter will turn off.
3-8 Instruments and controls The gauge may move slightly during braking, turning or acceleration due to fuel level movement in the tank. If you press the trip knob while the ignition switch is in the “ LOCK ” or “ Acc ” position, the fuel gauge ’ s dial will light up and the needle will indicate the amount of fuel remaining in the tank.
indicator needle is pointing to the “ + ” side, it indicates fuel-efficient driving. Except U.S.-spec. models: If the current rate of fuel consumption is lower than the average rate of fuel consumption, the indicator needle points to the “ − ” side.
3-10 Instruments and controls If any lights fail to illuminate, it indicates a burned-out bulb or a malfunction of the corresponding system. Consult your authorized SUBARU dealer for repair .
. Do not install any accessory such as a table or TV onto the seatback. . Do not store a heavy load in the seatback pocket. . Do not allow the rear seat occupant to place his/her hands or legs on the front passenger ’ s seatback, or allow him/her to pull the seatback.
3-12 Instruments and controls & Front passenger ’ s frontal airbag ON and OFF indica- tors ON / : Front passenger ’ s frontal airbag ON indicator / : Front passenger ’ s frontal airbag OFF indicator The front passenger ’ s frontal airbag ON and OFF indicators show you the status of the front passenger ’ s SRS frontal airbag.
warning light/malfunction indicator lamp turn off immediately . It may take several driving trips. If the light does not turn off, take your vehicle t o your authorized SUBARU dealer immediately .
3-14 Instruments and controls turns off when the engine is warmed up sufficiently . If the engine coolant temperature in- creases over the appropriate range, the indicator light/warning light blinks in RED . At this time, decelerate the vehicle. After the blinking RED light turns off, you can drive the vehicle normally .
at a safe and level location, and then check t he engine oi l le vel . Wh en the engine oil level is not within the normal range, refill with engine oil if necessary .
3-16 Instruments and controls bined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.
position and turns of f after approximately 2 seconds. This is an indication that the ABS system is working properly . CAUTION If the warning light behaves as follows, the ABS system may not work properly . When the warning light illuminates, the ABS function shuts down; how- ever , the conventional brake system continues to operate normally .
3-18 Instruments and controls NOTE . When the ignition switch is turned to the “ LOCK ” position with the electronic parking brake applied, the brake sys- tem warning light remains illuminated for approximately 30 seconds and then turns off.
has been restarted, shut down the engine again, apply the parking brake, and check the brake fluid level. 5. If the brake fluid level is not below the “ MIN ” mark, the EBD system may be malfunctioning. Drive carefully to the nearest SUBARU dealer and have the system inspected.
3-20 Instruments and controls & Door open warning light When the ignition switch is in the “ ON ” position, the door open warning light illuminates for approximately 2 seconds and then turns off. The door open warning light illuminates if any door , the rear gate (Outback) or trunk lid (Legacy) is not fully closed.
ABS system. Accordingly , if the ABS is inoperative, the V ehicle Dynamics Control system becomes unable to provide ABS control. As a result, the V ehicle Dynamics Control system also becomes inoperative, causing the warning light to illuminate.
3-22 Instruments and controls The Vehicle Dynamics Control system is probably malfunctioning under any of the following conditions. Have your vehicle checked at a SUBARU dealer immedi- ately . . The light does not illuminate when the ignition switch is turned to the “ ON ” position.
3. T o change the current setting, press the trip knob for at least 2 seconds. : Activated : Deactivated NOTE . The initial setting for your vehicle of the gear position indicator and shift-up indicator has been set for activation “ ” at the time of shipment from the factory .
3-24 Instruments and controls Clock NOTE Y our SUBARU dealer can change the settings of activating/deactivating the automatic adjustment of the clock by the GPS (Global Positioning System) (for models with the genuine SUBARU navigation system). Contact your SUBARU dealer for details.
& Outside temperature indica- tor 1) U.S.-spec. models 2) Except U.S.-spec. models The outside temperature indicator shows the outside temperature in a range from − 22 to 122 8 F( − 30 to 50 8 C). The indicator can give a false reading under any of the following conditions: .
3-26 Instruments and controls Pressing the trip knob toggles the indica- tion between the average fuel consump- tion corresponding to the A trip meter indication and the average fuel consump- tion corresponding to the B trip meter indication.
1) U.S.-spec. models 2) Except U.S.-spec. models If the driving range is shown as “ ” , there is only a tiny amount of fuel left in the tank. Y ou must refuel the vehicle immedi- ately .
3-28 Instruments and controls : Auto on/off headlights When the ignition switch is in the “ ON ” position, the headlights, instrument panel illumination, front side marker lights, tail lights and license plate lights are auto- matically on or off depending on the level of the ambient light.
& Daytime running light system W ARNING The brightness of the illumination of the high beam headlights is reduced by the daytime running light system.
3-30 Instruments and controls Illumination brightness con- trol The illumination brightness of the clock display , audio, air conditioner , multi func- tion display and meter/gauge dims under the following conditions. . when the light switch is in the “ ” or “ ” position .
The indicator light located on the combi- nation meter will illuminate when the front fog lights are on. Wiper and washer W ARNING In freezing weather , do not use the windshield washer until the wind- shield is sufficiently warmed by the defroster . Otherwise the washer fluid can freeze on the windshield, blocking your view.
3-32 Instruments and controls fluid ” F 1 1-42. Also, when driving the vehicle when there are freezing tempera- tures, use non-freezing type wi- per blades. . Do not clean the wiper blades with gasoline or a solvent, such as paint thinner or benzine.
! Wiper intermittent time control When the wiper switch is in the “ INT ” position, turn the dial to adjust the operat- ing interval of the wiper . The operating interval can be adjusted in five steps from the shortest interval to the longest. ! Windshield washer T o wash the windshield, pull the wiper control lever toward you.
3-34 Instruments and controls & Rear window wiper and washer switch (Outback) : W asher (accompanied by wiper operation) ON: Continuous INT : Intermittent OFF: Off : W asher (accompanied by wiper .
window defogger . Some models are also equipped with an outside mirror defogger and/or windshield wiper deicer. The de- fogger and deicer system is activated only when the ignition switch is in the “ ON ” position.
3-36 Instruments and controls NOTE . T ur n on the defogger and deicer system if the wipers are frozen to the windshield. . If the windshield is covered with snow , remove the snow so that the windshield wiper deicer works effec- tively .
button, the compass display is toggled on or off. When the compass is on, an illuminated compass reading will appear in the lower part of the mirror . Even with the mirror in anti-glare mode, the mirror surface turns bright if the transmission is shifted into reverse.
3-38 Instruments and controls & Outside mirrors ! Convex mirror (passenger side) W ARNING Objects look smaller in a convex mirror and farther away than when viewed in a flat mirror . Do not use the convex mirror to judge the distance of vehicles behind you when changing lanes.
and forward and backward. Horn T o sound the horn, push the horn pad. Instruments and controls 3-39.
—————————————— ——————————————— ——————————— —————————————— ———————————.
V entilator .............................................................. 4- 2 Air flow selection ................................................ 4 - 2 V entilators ........................................................... 4 -3 Manual climate control syste m (if equipped) .
4-2 Climate control V entilator & Air flow selection.
& V entilators ! Center ventilators 1) Open 2) Close Move the tab up and down or right and left to adjust the flow direction. T o open the ventilator , turn the center grille open/close wheel to the “ ” position. T o close it, turn the wheel to the “ ” position.
4-4 Climate control Manual climate control system (if equipped) & Control panel 1) Fan speed control dial 2) T emperature control dial 3) Air flow control buttons 4) Air conditioner button 5) Air inlet selection button 6) Rear window defogger button (Refer to “ Defogger and deicer ” F 3-34.
! Fan speed control dial The fan operates only when the ignition switch is turned to the “ ON ” position. The fan speed control dial is used to select four fan speeds. ! T emperature control dial This dial regulates the temperature of air flow from the air outlets over a range from the blue side (cool) to red side (warm).
4-6 Climate control ! Air conditioner button The air conditioner operates only when the engine is running. Press the air conditioner button while the fan is in ope ration to turn on the air conditioner . The indicator light will illumi- nate. Press it again to turn off the air condi- tioner .
3. Turn the temperature control dial all the way to the right. 4. Set the fan speed control dial to the highest speed. ! Heating and defrosting T o direct warm air toward the floor and the windshield: 1. Set the air inlet selection button to the OFF position.
4-8 Climate control NOTE When the “ ” button or “ ” button is pressed the air conditioner compres- sor automatically operates to quickly defog the windshield. However the indicator on the air conditioner button will not illuminate. At the same time, the air inlet selection is automatically set to “ outside air ” mode.
& Control panel 1) T emperature control button (driver ’ s side) 2) Dual mode button 3) Air flow mode selection button 4) Fan speed control button 5) T emperature control button (front pas- seng.
4-10 Climate control ! AUTO button FULL AUTO mode operation: When the “ AUTO ” button is pressed, the indicator light “ FULL AUTO ” on the display illuminates. In this state, fan speed, air flow distribution, air-inlet control, and air conditioner compresso r operation are automatically controlled.
button. T o decrease the temperature setting, press the “ ” side of the tempera- ture control button. Each temperature setting is shown on the display . When the “ LO ” is shown, the system provides maximum cooling perfor- mance. When the “ HI ” is shown, the system provides maximum heating perfor- mance.
4-12 Climate control ! A/C – Air conditioner button If the windshield starts to fog when the climate control system is operated in the AUTO mode, press the air conditioner button “ A/C ” to defog and dehumidify .
Press the air inlet selection button to the OFF position when the interior has cooled to a comfortable temperature and the road is no longer dusty . The indicator light will turn off. W ARNING Continued operation in the ON posi- tion (recirculation) may fog up the windows.
4-14 Climate control Operating tips for heater and air conditioner & Cleaning ventilator grille Always keep the front ventilator inlet grille free of snow, leaves, or other obstructions to ensure efficient heating and defrosting.
Air filtration system Y our vehicle ’ s air conditioning system is equipp ed with an air f iltrat ion syst em. Replace the air filter element according to the replacement schedule shown in the following table. This schedule should be followed to maintain the filter ’ s dust collection ability .
4-16 Climate control 3. Remove the air filter . 4. Replace the air filter element with a new one. 5. Reinstall the cover of the air filter . CAUTION The arrow mark on the filter must point UP . 6. Reinstall the glove box, and connect the damper shaft.
driver ’ s side of the instrument panel as shown in the illustration. Climate control 4-17.
—————————————— ——————————————— ——————————— —————————————— ———————————.
Antenna system .................................................. 5-2 Printed antenna ................................................... 5- 2 FM reception ....................................................... 5 -2 XM TM satellite rad io reception (if equipped) .
5-2 Audio Antenna system & Printed antenna CAUTION Do not use sharp instruments or window cleaner containing abra- sives to clean the inner surface of the window on which the antenna is printed. Doing so may damage the antenna printed on the window.
Y ou may experience problems in receiving XM TM satellite radio signals in the follow- ing situations. . If you are driving northward in a coastal area Y ou will notice that the XM TM satellite radio antenna is fixed to the upper right hand corner of your windshield.
5-4 Audio Installation of accessories Always consult your SUBARU dealer before installing a citizen band radio or other transmitting device in your vehicle. Such devices may cause the electronic control system to malfunction if they are incor rectl y instal led or if t hey are no t suited for the vehicle.
& T ype A audio set (if equipped) The audio set will operate only when the ignition switch is in the “ Acc ” or “ ON ” position. . Power and sound controls: refer to page 5-7 . Radio operation: refer to page 5-10 . Satellite radio operation (if equipped): refer to page 5-14 .
5-6 Audio & T ype B audio set (if equipped) The audio set will operate only when the ignition switch is in the “ Acc ” or “ ON ” position. . Power and sound controls: refer to page 5-7 . Radio operation: refer to page 5-10 . Satellite radio operation (if equipped): refer to page 5-14 .
Power and sound controls & Power switch and volume control The dial is used for both power (ON/OFF) and volume control. The radio is turned ON and OFF by pressing the dial, and the volume is controlled by turning the dial.
5-8 Audio ! SVC setting SVC (Speed V olume Control) is a function that automatically adjusts the volume according to the vehicle speed. As the vehicle speed increases, the audio vo- lume automatically increases to match the vehicle speed, in order to create a pleasant listening environment even as the driving noise increases.
& Adjustable level of each mode Mode Range of levels (displayed) Initial setting Turn counterclockwise Turn clockwise V olume V olume control 0 to 40 15 For less volume For more volume AUX volume .
5-10 Audio FM/AM radio operation Press the “ FM ” or “ AM ” button when the radio is off to turn on the radio. & FM selection Press the “ FM ” button when the radio is on to select FM1, FM2 or FM3 reception.
! Seek tuning (SEEK) If you press the “ ” or “ ” side of the “ SEEK ” button briefly , the radio will auto- matically search for a receivable station and stop at the first one it finds. This function may not be available, however , when radio signals are weak.
5-12 Audio ! PTY (Program type) group selection In PTY selection mode, press the “ PTY ” button “ ” or “ ” to change the PTY group by one step at a time. Pressing “ ” changes the PTY group up by one step. Pressing “ ” changes the PTY group down by one step.
& Station preset Preset buttons ! How to preset stations 1. Press the “ FM ” or “ AM ” button to select FM1, FM2, FM3 or AM reception. 2. Press the “ ” or “ ” side of the “ SEEK ” button or tune the radio manually until the desired station f requency is displayed.
5-14 Audio mode – Switching to the other band – Press the “ A.S ” button – Press the “ SCAN ” button – Press the “ SEEK ” button – Press any of the preset buttons – T urn the “ TUNE/TRACK/CH ” dial – T urn off the audio system – T urn off the ignition switch .
dealer or visit Sirius Satellite Radio at www .sirius.com or call 1-888-539-SIRIUS (7474) for more information. Sirius, the Sirius dog logo, channel names and logos are trademarks of SIRIUS Satellite Radio Inc. & Satellite radio reception Satellite radio signals are best received in areas with a clear view of the open sky .
.
pressing the “ FOLDER ” button “ ” changes the category up by one step. Pressing “ ” changes the category down by one step. When a category is selected, pressing the “ SEEK ” button selects channels only with- in the selected category .
5-18 Audio & Display selection Press the “ TEXT ” button while receiving the satellite radio to change the display as follows: CD player operation NOTE . Make sure to always insert a disc with the label side up. If a disc is inserted with the label side down, the player displays “ CHECK DISC ” .
If no indicator blinks, it means that there is no idle position in the magazine. 2. When the “ LOAD ” indicator illumi- nates, insert the disc. Once you have inserted the disc, the “ LOAD ” indicator will turn off and the “ LOADING ” indicator will illuminate.
5-20 Audio if you press “ FM ” , “ AM ” or “ SA T ” button, the player will enter standby mode. Press the “ CD/AUX ” button to start playback. ! Loading all the magazine (full disc loading mode) 1. If you continue to press the “ LOAD ” button for more than 1.
! When selecting a CD to play (type B) Disc select buttons Press a desired one of the disc select buttons the disc number indicator of which steadily lights up.
5-22 Audio & Fast-forwarding and fast-re- versing ! Fast-forwarding Press the “ ” side of the “ SEEK ” button continuously to fast-forward the track/file.
“ RPT ” button (type B audio) while the track/file (track) is playing. Each time you briefly press the button, the mode changes in the following se- quences. T ype A audio: T ype B audio: NOTE . The “ TRACK RPT ” indication refers to the repeat playback of a single track.
5-24 Audio second or longer (type A audio) or press the “ RDM ” button (type B audio). . For type A audio, press the “ RPT/RDM ” button for 0.5 second or longer . . For type B audio, press the “ RDM ” button. Each time you press the button, the mode changes in the following sequences.
. Press the “ RPT/RDM ” button . T urn the “ TUNE/TRACK/CH ” dial . Press the “ ” or “ ” side of the “ FOLDER ” button . Press the “ ” button . Press the “ ” or “ ” side of the “ SEEK ” button . Press the disc select button .
5-26 Audio “ FOLDER ” button starts playback be- ginning with the first track/file (track). & How to eject a CD from the player (type A) When a disc is being played back or when a disc is in the player , press the eject button “ ” . The disc will be ejected.
! Ejecting all discs from the player (all disc ejection mode) 1. If you press the “ ” button for 1.5 seconds or longer, the player will produce beep sound and will enter the all disc ejection mode. At this time, the disc number indicator and “ ALL EJECT ” indi- cator will flash.
5-28 Audio AUX unit operation By connecting a commercial audio pro- duct to the vehicle, such as a portable audio player, you can hear its sound via the vehicle ’ s speaker . For the audio input jack, a stereo mini pin plug (3.5ø) can be connected.
Precautions to observe when handling a compact disc Use only compact discs (CDs, CD-Rs and CD-RWs) that have the mark shown in the following illustration.
5-30 Audio there are deposits, wipe the disc surface from the center outward with a dry , soft cloth. Be sure not to use a rough cloth, thinner , benzine, alcohol, etc. . Do not use any disc that is scratched, deformed, or cracked. Also, do not use any disc that has a non-standard shape (for example, a heart shape).
These buttons are located on the spokes of the steering wheel. They allow the driver to control audio functions without taking his/her hands off the steering wheel. & MODE button This button is used to select the desired audio mode. Each time it is pressed, the mode changes to the next one in the following sequence.
5-32 Audio side to reduce the volume. A number indicating the volume will be shown on the audio display . & MUTE button (if equipped) Press this button if you wish to immedi- ately cut the volume to zero. The audio display will show “ MUTE ” .
with it left in the breast pocket or bag. NOTE The Hands-free system may not oper- ate properly under the following condi- tions. . The cell phone is turned off. . The cell phone is not in the phone call area. . The battery of the call phone has run down.
5-34 Audio would void the user ’ s authority to operate this device. CAUTION . Do not leave the cell phone in the vehicle. The temperature in the vehicle may become extremely high and cause a malfunction of the cell phone. . When using the cell phone, be careful not to get it close to the in-vehicle equipment.
“ TUNE/TRACK/CH ” dial. 4. Select “ Pair phone ” by operating the “ TUNE/TRACK/CH ” dial. 5. Press the talk switch. Refer to “ V oice command system ” F 5-40. 6. Say the name to be registered. 7. Se l e ct “ Confirm ” by op erating the “ TUNE/TRACK/CH ” dial or say “ Confirm ” .
5-36 Audio If the registered name or phone number has more than 12 characters, press the “ TEXT ” button for more than 1.5 seconds to scroll the name or phone number .
! Menu list of the Hands-free system Turn the “ TUNE/TRACK/CH ” dial to select a menu, and then press the dial to enter the selected menu. NOTE For details about the operation, follow the voice guidance.
.
First menu Second menu Third menu Details Setup Security Set Pin Setting a PIN code Phbk Lock Locking the phonebook* Phbk Unlock Unlocking the phonebook* Go Back Phone setup Pair Phone Registering a n.
5-40 Audio ! V oice command system T alk switch T o turn on the voice command system, press the talk switch briefly . T o turn off the voice command system, press the talk switch for more than 1.5 seconds. The commands available for the voice command system are listed in the follow- ing chart.
45 set pass key 46 list phone 47 add entry 48 delete entry 49 delete speed dial 50 by voice 51 voice 52 by phone 53 phone 54 call history 55 by call history 56 set speed dial 57 next 58 incoming 59 ou.
—————————————— ——————————————— ——————————— —————————————— ———————————.
Interior ligh t ......................................................... 6 -2 Dome light .......................................................... 6- 2 Map light ............................................................. 6 -2 Cargo area light (Outback) .
6-2 Interior equipment Interior light When leaving your vehicle, make sure the light is turned off to avoid battery dis- charge. & Dome light 1) ON 2) DOOR 3) OFF The dome light switch has three positions: ON: The light remains on continuously . OFF: The light remains off.
When leaving the vehicle, make sure the light is turned off to avoid battery dis- charge. ! Door interlock switch 1) Door interlock switch Although the map light switches are in the OFF position (manually off), the map lights can be set to illuminate automatically in conjunction with a door opening, etc.
6-4 Interior equipment . The ignition switch is turned from the “ LOCK ” po sition to the “ Acc ” or “ ON ” position. . The rear gate is locked using the remote keyless entry transmitter . The setting of the period for which the lights remain on (OFF delay timer) can be changed by a SUBARU dealer .
CAUTION Do not pull out the extension plate with the sun visor positioned over the windshield. The extension plate would obstru ct you r v iew o f t he rearview mirror . & V anity mirror with light CAUTION Keep the vanity mirror cover closed while the car is being driven to avoid being blinded by glare.
6-6 Interior equipment & Glove box 1) Lock 2) Unlock T o open the glove box, pull the handle. T o close it, push the lid firmly upward. T o lock the glove box, insert the key and turn it clockwise. T o unlock the glove box, insert the key and turn it counterclockwise.
T o use again as cup holders: Insert the divider plate into the console box. ! Center console box (rear) The center console box has a two-layer structure consisting of an upper compart- ment and a lower compartment. ! Upper compartment 1) Upper compartment lock release Pull up the upp er c ompartme nt lo ck release to open the upper compartment.
6-8 Interior equipment & Overhead console T o open the console, push on the lid lightly and it will automatically open. CAUTION When your vehicle is parked in the sun or on a warm day , the inside of the overhead console heats up. Avoid storing plastic or other heat- vulnerable or flammable articles such as a lighter in the overhead console.
& Front passenger ’ s cup holder The dual cup holder is built into the center console. & Rear passenger ’ s cup holder A dual cup holder is built in the armrest. CAUTION When a cup containing a beverage is in the cup holder , do not fold down or recline any seat.
6-10 Interior equipment trim can be used to hold beverage bottles and other items. Accessory power outlets Power outlet below the climate control Power outlet in the center console Power outlet in the cargo area (if equipped) Acce ss ory po wer outl ets ar e pro vi ded below the climate control, in the center console and in the cargo area.
CAUTION . Do not attempt to use a cigarette lighter in the accessory power outlet. . Do not place any foreign objects, especially metal ones such as coins or aluminum foil, into the accessory power outlet. That could cause a short circuit. Al- ways put the cap on the acces- sory power outlet when it is not in use.
6-12 Interior equipment power outlet in the center console to be used. Pass the cord of the electrical appliance through this gap. Ashtray (if equipped) CAUTION Do not use ashtrays as waste re- ceptacles or leave a lighted cigarette in an ashtray . This could cause a fire.
NOTE Particles of ash and tobacco will accu- mulate around the hinges of the ash- tray ’ s inner lid. Clean them off using a toothbrush or another narrow- ended implement. Coat hook W ARNING Do not hang coat hangers or other hard or pointed objects on the coat hooks.
6-14 Interior equipment Shopping bag hook CAUTION Do not hang items on the shopping bag hook that weigh 1 1 lbs (5 kg) or more. & Legacy A shopping bag hook is attached to each inner side wall of the trunk near the trunk lid opening. & Outback A shopping bag hook is attached to each side of the cargo area.
CAUTION Make sure the driver ’ s floor mat is placed back in its proper location and correctly secured on its retain- ing pin. Also, do not use more than one floor mat. If the floor mat slips forward and interferes with the movement of the pedals duri ng driving, it could cause an accident.
6-16 Interior equipment & T o remove the cover housing 1. Rewind the cover . 2. Hold down the button on the right- hand rear quarter panel and lift up the right-hand cover housing. 3. Remove the cover housing. & Stowage of the cargo area cover The cargo area cover can be stowed in under the cargo floor .
& T o install the cover housing 1. T o install the cover housing, insert both ends of the cover housing into the retainers. 2. Make sure to fix the front part of the cargo area cover behind the rear seat. Convenient tie-down hooks (if equipped) CAUTION The convenient tie-down hooks are designed only for securing light cargo.
6-18 Interior equipment storing recesses. Under-floor storage compart- ment The subfloor storage compartment is located under the floor of the trunk or cargo area and can be used to store small items. T o open the lid, pull the tab or handle up. NOTE When storing a flat tire, put the sub- floor storage in the trunk or cargo area.
Rear view camera (if equipped) Legacy Outback A rear view camera is attached to the trunk lid (Legacy) or rear gate (Outback). When the ignition switch is “ ON ” and the shift lever (MT models) or.
6-20 Interior equipment malfunction. . If the rear view camera is used for a long time while the engine is not operated, the battery may become completely discharged. NOTE . Do not wipe the camera with alcohol, benzine or pain t thin ner . Oth erwise , discoloration may occur .
& Viewing range on the screen Range of view Range of view Image from camera The area from the rear end of the bumper can be viewed. Areas at both ends of the bumper and areas just under the bumper cannot be viewed. Also, the image from the rear view camera looks shorter than the actual distance.
6-22 Interior equipment tion cannot be seen on the screen. CAUTION The range that can be viewed with the rear view camera is limited. Always be sure to check with your eyes when moving backward and proceed slowly .
! When there is an upward slope at the back 1) 3 feet (1 m) The distance on the screen looks farther than the actual distance. ! When there is a downward slope at the back 1) 3 feet (1 m) The distance on the screen looks nearer than the actual distance.
—————————————— ——————————————— ——————————— —————————————— ———————————.
Fuel ...................................................................... 7 -2 Fuel requirements ............................................... 7- 2 Fuel filler lid and cap ........................................... 7 -3 State emission testing (U.
7-2 Starting and operating Fuel CAUTION Use of a fuel which is low in quality or use of an inappropriate fuel additive may cause engine damage. & Fuel requirements ! Non-turbo models The non-turbo en gine is designed to operate using unleaded gasoline with an octane rating of 87 AKI or higher .
! MMT Some gasoline contains an octane-en- hancing additive called MMT (Methylcy- clopentadienyl Manganese Tricarbonyl). If you use such fuels, your emission control system performance may deteriorate and the CHECK ENGINE warning light/mal- function indicator lamp may turn on.
7-4 Starting and operating 1. T o open the fuel filler lid, pull the lid release lever up. The lever is on the floor at the left of the driver ’ s seat.
4. Hook the cord that is attached to the fuel filler cap onto the hook inside the fuel filler lid. W ARNING . When refueling, insert the fuel nozzle securely into the fuel filler pipe. If the nozzle is lifted or not fully inserted, its automatic stop- ping mechanism may not func- tion, causing fuel to overflow the tank and creating a fire hazard.
7-6 Starting and operating mage to the fuel system. . After refueling, turn the cap to the right until it clicks to ensure that it is fully tightened. If the cap is not securely tightened, fuel may leak out while the vehicle is being driven or fuel spillage could occur in the event of an accident, creating a fire hazard.
not damage an AWD SUBARU vehicle. Under no circumstances should the rear wheels be jacke d off the groun d, nor should the driveshaft be disconnected for state emission testing. The EP A has issued re gulations for inspecting the On-Board Diagnostic (OBD) system as part of the state emis- sion s in spect ion .
7-8 Starting and operating NOTE Engine oil, engine coolant, brake fluid, washer fluid and other fluid levels should be checked daily , weekly or at fuel stops. Starting the engine & MT models 1. Apply the parking brake. 2. T urn off unnecessary lights and ac- cessories.
6. Confirm that all warning and indicator lights have turned off after the engine has started. The fuel injection system auto- matically lowers the idle speed as the engine warms up.
7-10 Starting and operating hard. Stopping the engine W ARNING Do not stop the engine when the vehicle is moving. This will cause loss of power to the power steering and the brake booster, making steer- ing and braking more diff icult.
& Starting your vehicle NOTE All vehicle doors, the engine hood and trunk / rear gate must be closed prior to activating the remote engine start sys- tem.
7-12 Starting and operating vehicle ’ s engine management system determines there is a safety risk due to a vehicle related problem, the vehicle will shut down and the vehicle ’ s horn will honk three times.
Transmitte r flash sequence Feature description Flashes when button is pressed Indicates that the system is transmitting an RF signal. T wo long flashes following re- mote start activation (transmit- .
7-14 Starting and operating & Service mode In service mode, the remote engine start function is temporarily disabled to prevent the system from unexpectedly starting the engine while being serviced. T o engage or disengage service mode: 1. Enter the vehicle and close all vehicle doors and the trunk/rear gate.
. Be careful not to allow children to touch the batte ry and any re- moved parts; children could swallow them. . There is a danger of explosion if an incorrect replacement battery is used. Replace only with the same or equivalent type of bat- tery . .
7-16 Starting and operating ference, and (2) this device must accept any interference received, in- cluding interference that may cause undesired operation. Changes or modifications not ex- pressly approved by the party respon- sible for compliance could void the user ’ s authority to operate the equip- ment and void warranty .
transmission in neutral, release the clutch pedal momentarily , and then try again. & Shifting speeds ! Recommended shifting speeds The best compromise between fuel econ- omy and vehicle performance during normal driving is ensured by shifting up at the speeds listed in the following table.
7-18 Starting and operating Automatic transmission/Con- tinuously variable transmis- sion The automatic transmission is electroni- cally controlled and provides 5 forward speeds and 1 reverse speed. The con- tinuously variable transmission is electro- nically controlled and provides an infinite number of forward speeds and 1 reverse speed.
provides s uperior transmission effi- ciency for maximum fuel economy . At times, depending on varying driving conditions, a chain operating sound may be heard that is characteristic of this type of system.
7-20 Starting and operating ! D (Drive) This position is for normal driving. The transmission automatically shifts into a suitable gear accor ding to the vehicle speed and the acceleration you require. When more acceleration is required in this position, depress the accelerator pedal fully to the floor and hold that position.
! Shift lock release using the shift lock release button Perform the following procedure to release the shift lock. 1. Apply the parking brake and stop the engine.
7-22 Starting and operating 1) Upshift indicator 2) Downshift indicator 3) Gear position indicator When the manual mode is selected, the gear position indicator and upshift indica- tor and/or downshift indicator on the combination meter illuminate.
place and let the engine idle until the warning light turns off. & Driving tips . On a road surface where there is a risk of wheelspin (for example, a snow- or gravel-covered road), you can pull away from a standstill safely and easily by first selecting the 2nd gear of the manual mode.
7-24 Starting and operating a loss of control of the vehicle. Keep driving straight ahead while gradually reducing speed. Then slowly pull off the road to a safe place. & Brake system ! T wo separate circuits Y o ur vehic le has a d ual circ uit b rake system.
ABS (Anti-lock Brake Sys- tem) W ARNING Always use the utmost c are in driving – overconfidence because y o ua r ed r i v i n gw i t ha nA B S equipped vehicle could easily lead to a serious accident. CAUTION . The ABS system does not always decrease stopping distance.
7-26 Starting and operating minate when the ignition switch is turned to the “ ON ” position. . The warning light illuminates when the ignition switch is turned to the “ ON ” position, but it does not turn off even when the vehicle speed exceeds approxi- mately 8 mph (12 km/h).
& Steps to take if EBD system malfunctions If a malfunction occurs in the EBD system, the system stops working and the brake system warning light and ABS warning light illuminate simultaneously . The EBD system may be malfunctioning if the brake system warning light and ABS warning light illuminate simultaneously during driving.
7-28 Starting and operating V ehicle Dynamics Control system W ARNING Always use the utmost c are in driving – overconfidence because you are driving with a V ehicle Dy- namics Control system equipped vehicle could easily lead to a ser- ious accident.
NOTE . Slight twitching of the brake pedal may be felt when the Vehicle Dynamics Control system operates; a small de- gree of vehicle or steering wheel shak- ing may also be noticed in this situa- tion. These are normal characteristics of V ehicle Dynamics Control operation and are no cause for alarm.
7-30 Starting and operating through the ABS, whenever the ABS stops operating due to a malfunc- tion in that electrical system, the V ehicle Dynamics Control will also become unable to control all four brakes. Thus V ehicle Dynamics Control system operation halts and the warning light illuminates.
minutes have passed to allow the engine to heat up sufficiently . ! V ehicle Dynamics Control OFF in- dicator light The light illuminates when the ignition switch is turned to the “ ON ” position and turns off after approximately 2 seconds.
7-32 Starting and operating . If the switch is held down for 10 seconds or longer , the indicator light turns off, the V ehicle Dynamics Control system is activated, and the system ignores any furth er pr essing of the switch. T o make the switch usable again, turn the ignition switch to the “ LOCK ” position and restart the en- gine.
low pressure threshold, the low tire pressure warning light should turn off a few minutes later. If this light still illuminates while driving after adjusting the tire pres- sure, a ti re may have sig nificant damage and a fast leak that causes the tire to lose air rapidly .
7-34 Starting and operating & Electronic parking brake 1) Parking brake switch 2) Hill Holder switch 3) Indicator light W ARNING . Before exiting the vehicle, make sure that you turn off the engine. Otherwise, the parking brake may be released and an accident may occur .
without depressing the brake pedal or the clutch pedal, the parking brake is not released. . When the parking brake is being applied or relea sed, noise may be noticed.
7-36 Starting and operating the brake system warning light has illuminated. Otherwise, the Hill Holder function may not operate properly and an accident may occur. 1) Parking brake switch 2) Hill Holder switch 3) Indicator light Y ou can activate/deactivate the Hill Holder function by pressing the Hill Holder switch.
! Electronic parking brake system warning CAUTION If the brake system warning light flashes, the electronic parking brake system may be malfunctioning. Im- mediately stop your vehicle in the nearest safe location and contact your SUBARU dealer. If a malfunction occurs in the electronic parking brake system, the brake system warning light flashes.
7-38 Starting and operating Cruise control Cruise control enables you to maintain a constant vehicle speed without holding your foot on the accelerator pedal and it is operative when the vehicle speed is 25 mph (40 km/h) or more. W ARNING Do not use the cruise control under any of the following conditions.
the accelerator pedal. At this time, the cruise control set indicator light is illuminated in the combination meter . The vehicle will maintain the desired speed. V ehicle speed can be temporarily in- creased while driving with the cruise control activated.
7-40 Starting and operating & T o change the cruising speed ! T o increase the speed (by the “ RES/ SET ” switch) Press the “ RES/SET ” switch to the “ RES ” side and hold it until the vehicle reaches the desired speed. Then, release the switch.
! T o decrease the speed (by brake pedal) 1. Depress the brake pedal to release cruise control temporarily . 2. When t he spe ed dec reases to the desired spee d, press the “ RES/SET ” switch to the “ SET ” side once. Now the desired speed is set and the vehicle will keep running at that speed without de- pressing the accelerator pedal.
—————————————— ——————————————— ——————————— —————————————— ———————————.
New vehicle break-in driving – the first 1,000 miles (1,600 km) ..................................... 8-2 Fuel economy hints ............................................ 8-2 Engine exhaus t gas (ca rbon monoxide) ............ 8-2 Catalytic convert er .
8-2 Driving tips New vehicle break-in driving – the first 1,000 miles (1,600 km) The performance and long life of your vehicle are dependent on how you handle and care for your vehicle while it is new. Follow these instructions during the first 1,000 miles (1,600 km): .
exhaust fumes are entering the vehicle, have the problem checked and corrected as soon as possible. If you must drive under these conditions, drive only with all windows fully open. . Keep the trunk lid (Legacy) or rear gate (Outback) closed while driving to prevent exhaust gas from entering the vehicle.
8-4 Driving tips T o avoid damage to the catalytic conver- ter: . Use only unleaded gasoline. Even a small amount of leaded ga soline will damage the catalytic converter . . Never start the engine by pushing or pulling the vehicle. . Avoid racing the engine.
Driving tips for A WD vehicles W ARNING . Always maintain a safe driving speed according to the road and weather conditions in order to avoid having an accident on a sharp turn, during sudden brak- ing or under other similar condi- tions.
8-6 Driving tips Off road driving W ARNING . Always maintain a safe driving speed according to the road and weather conditions in order to avoid having an accident on a sharp turn, during sudden brak- ing or under other similar condi- tions.
vehicle and may cause it to stall. Never attempt to drive through rushing water; regardless of its depth, it can wash away the ground from under your tires, resulting in possible loss of traction and even vehicle rollover . . Always check your brakes for effec- tiveness immediately after driving in sand, mud or water .
8-8 Driving tips Winter driving & Operation during cold weather Carry some emergency equipment, such as a window scraper , a bag of sand, flares, a small shovel and jumper cables. Check the battery and cables. Cold temperatures reduce battery capacity .
could make the pedals slippery and driving dangerous. While warming up the vehicle before driving, check that the accelerator pedal, brake pedal, and all other controls operate smoothly . Clear away ice and sn ow t hat has accumulated under the fenders to avoid making steering difficult.
8-10 Driving tips leading to loss of vehicle control. An anti-lock brake system (ABS) en- hances your v ehicle ’ s braking perfor- mance on snowy and icy road s. For information about braking on slippery surfaces, refer to “ ABS (Anti-lock Brake System) ” F 7-25 and “ Vehicle Dynamics Control system ” F 7-28.
train of your vehicle and may affect ride, handling, braking and speedometer/odom eter calibra- tion. It also may be dangerous and lead to loss of vehicle con- trol. . Do not use a combi nation of radial, belted bias or bias tires since it may cause dangerous handling characteristics and lead to an accident.
8-12 Driving tips Loading your vehicle W ARNING Never allow passengers to ride on a folded rear seatback, in the trunk or in the cargo area. Doing so may result in serious injury .
& V ehicle capacity weight The load capacity o f your vehicle is determined by weight, not by available cargo space. The maximum load you can carry in your vehicle is shown on the vehicle placard attached to the driver ’ s side door pillar.
8-14 Driving tips & Roof rails with integrated crossbars (Outback) 1) Integrated crossbars CAUTION . For cargo carrying purposes, the bars must be used as crossbars and be used together with the genuine SUBARU carrying at- tachment. The bars must never be used alone to carry cargo.
! How to use as crossbars CAUTION . Do not raise the bar higher than necessary . The base of the bar may be damaged. . Be careful not to contact the bars while sliding them. Otherwise, the bars may be scratched or the latch portions may be da- maged. .
8-16 Driving tips 1. Pull out the crossbars from the roof rail holders by pulling up the covers. 2. Slide the bars in the direction shown in the illustration. 3. Install the bars into the holders. 4. Make sure that the latches are fitted securely . T railer hitch (Outback — if equipped) W ARNING .
could g et loose and create a traffic safety hazard. . Use only the ball mount supplied with this hitch. Use the hitch only as a weight carrying hitch. Do not use with any type of weight distributing hitch. The trailer hitch is designed to tow a Class 1 rated load.
8-18 Driving tips 5. Use only a hitch ball that is appropriate for the ball mount and your trailer . The hitch ball must be securely installed on the ball mount. 6. Connect your trailer to the hitch ball. 7. Connect the trailer and the hitch with safety chains that will hold the trailer ’ s maximum gross weight.
T rail er towing Y our vehicle is designed and intended to be used primarily as a passenger-carrying vehicle. T owing a trailer puts additional loads on your vehicle ’ s engine, drivetrain, brakes, tires and suspension and has an adverse effect on fuel economy .
8-20 Driving tips 3.6 L models Conditions Maximum total trailer weight When towing a trailer without brakes. 1,000 lbs (453 kg) When towing a trailer with brakes. 3,000 lbs (1,360 kg) When towing a trailer on a long uphill grade continuously for over 5 miles (8 km) with an outside temperature of 104 8 F (40 8 C) or above.
Certification label ! Gross Axle Weight (GA W) and Gross Axle Weight Rating (GA WR) Gross Axle Weight The total weight applied to each axle (GA W) must never exceed the Gross Axle Weight Rating (GAWR). The front and rear GA Ws can be adjusted by relocating passengers and luggage inside the vehi- cle.
8-22 Driving tips NOTE For vehicles with trailer brakes, the trailer tongue load exceeds 200 lbs (90 kg) when calculated at 8% of the maximum total trailer weight. Even in this case, the maximum value is 200 lbs (90 kg). 1) Jack 2) Bathroom scale The tongue load can be weighed with a bathroom scale as shown in the following illustrat ion.
trailer . ! Outback The use of a genuine SUBARU trailer hitch is recommended. A genuine SUBARU hitch is available from your SUBARU dealer . If use of a non-genuine hitch is unavoid- able, be sure the hitch is suited to your vehicle and trailer .
8-24 Driving tips ! Side mirrors After hitching a trailer to your vehicle, check that the standard side mirrors provide a good rearward field of view without significant blind spots.
the rear, check the total trailer weight, GVW , GA Ws and tongue load again, then confirm that the load and its distribution are acceptable. . Check that the tire pressures are correct. . Check that the vehicle and trailer are connected properly . Confirm that – the trailer tongue is connected properly to the hitch ball.
8-26 Driving tips engine braking effect and prevent over- heating of your vehicle ’ s brakes. Do not make sudden downshifts. . When driving uphill in hot weather , the air conditioner may turn off automatically to protect the engine from overheating.
If you park your vehi cle in an emergency ......... 9-2 T emporary spare tire ........................................... 9-2 Maintenance tools ............................................... 9-3 Legacy ................................................
9-2 In case of emergency If you park your vehicle in an emergency The hazard warning flasher should be used in day or night to warn other drivers when you have to park your vehicle under emergency conditions. Avoid stopping on the road. It is best to safely pull off the road if a problem occurs.
CAUTION Never use any temporary spare tire other than the original. Using other sizes may result in severe mechan- ical damage to the drive train of your vehicle. The temporary spare tire is smaller and lighter than a conventional tire and is designed for emergency use only .
9-4 In case of emergency & Legacy 1) Under-floor storage compartment (Refer to “ Under-floor storage compartment ” F 6-18.) 2) Electronic parking brake release tool 3) Jack handle 4) Spare tir.
& Outback 1) Under-floor storage compartment (Refer to “ Under-floor storage compartment ” F 6-18.) 2) Electronic parking brake release tool 3) Jack handle 4) Spare tire 5) T ool bucket 1) Wheel nut wrench 2) Screwdriver 3) Jack 4) T owing hook (eye bolt) The jack handle is stored under the cargo area.
9-6 In case of emergency Flat tires If you have a flat tire while driving, never brake suddenly; keep driving straight ahead while gradually reducing speed. Then slowly pull off the road to a safe place. & Changing a flat tire W ARNING . Do not jack up the vehicle on an incline or a loose road surface.
Outback 6. T ake out the tool bucket and turn the attaching bolt counterclockwise, then take the spare tire out. NOTE If the spare tire provided in your vehicle is a temporary spare tire, carefully read “ T emporary spare tire ” F 9-2 and strictly follow the instructions.
9-8 In case of emergency 10. Remove the wheel nuts and the flat tire. 1 1. Before putting the spare tire on, clean the mounting surface of the wheel and hub with a cloth. 12. Put on the spare tire. Replace the wheel nuts. T ighten them by hand. W ARNING Do not use oil or grease on the wheel studs or nuts when the spare tire is installed.
W ARNING Never place a tire or tire changing tools in the passenger compartment after changing wheels. In a sudden stop or collision, loose equipment could strike occupants and cause injury .
9-10 In case of emergency Jump starting W ARNING . Battery fluid is SULFURIC ACID. Do not let it come in contact with the eyes, skin, clothing or the vehicle. If battery fluid gets on y ou, thoroughly flush the exposed area with water immediately . Get medical help i f the fluid h as entered your eyes.
1) Connect one jumper cable to the positive (+) terminal on the discharged battery . 2) Connect the other end of the jumper cable to the positive (+) terminal of the booster battery . 3) Connect one end of the other cable to the negative ( − ) terminal of the booster battery .
9-12 In case of emergency Engine overheating W ARNING Never attempt to remove the radia- tor cap until the engine has been shut off and has fully cooled down. When the engine is hot, the coolant is und er pre ssure. Removing the cap while th e engine is still hot could release a spray of boiling hot coolant, which could burn you very seriously .
procedures for safety . & T owing and tie-down hooks The towing hooks should be used only in an emergency (e.g., to free a stuck vehicle from mud, sand or snow). CAUTION . Use only the specified towing hooks and tie-down hooks. Never use suspension parts or other parts of the body for towing or tie-down purposes.
9-14 In case of emergency Rear towing hook: 1. T ake the towing hook out of the tool bucket and take the screwdriver out of the tool bucket. T ake the jack handle out of the trunk (Legacy) or cargo area (Out- back). 2. Pry off the cover on the rear bumper using a screwdriver , and you will find a threaded hole for attaching the towing hook.
Rear tie-down holes: 1) Rear tie-down hole The rear tie-down holes are located near each of the jack-up reinforcements. W ARNING Use the rear tie-down holes only for downward anchoring. If they are used to anchor the vehicle in any other direction, cables may slip out of the holes , po ssibly ca using a dangerous situation.
9-16 In case of emergency turned o ff, it wi ll tak e g reate r effort to operate the brake pedal and steering wheel. CAUTION . If transmission failure occurs, transport your vehicle on a flat- bed truck. . Do not run the engine while being towed using this method.
. When releas ing the electronic parking brake by using the elec- tronic parking brake release tool, always perform the foll owing items. – Shift the shift lever in the “ 1 ” or “ R ” position (MT models). – Shift the select lever in the “ P ” position (A T and CVT models).
9-18 In case of emergency 6. Insert the electronic parking brake release tool into the cap of the parking brake release device. 7. Remove the cap of the parking brake release device by turning the electronic parking brake release tool counterclock- wise.
T runk lid (Legacy) – if the trunk lid cannot be opened The trunk lid can also be opened using the key . T o open the trunk lid, insert the key into the key cylinder and turn it clockwise.
9-20 In case of emergency Moonroof – if moonroof can- not be closed If the moonroof cannot be closed with the moonroof switch, you can close the moon- roof manually . 1. T ake out the screwdriver from the tool bucket. 2. Open the overhead console. Refer to “ Overhead console ” F 6-8.
Exterior care ....................................................... 10- 2 W ashing ............................................................. 1 0- 2 W axing and polishing ......................................... 1 0 - 3 Cleaning aluminum wheels .
10-2 Appearance care Exterior care & W ashing CAUTION . When washing the vehicle, the brakes may get wet. As a result, the brake stopping distance will be longer. T o dry the brakes, drive the vehicle at a safe speed while lightly pressing the brake pedal to heat up the brakes.
! Using a warm water washer . Keep a good distance of 12 in (30 cm) or more between the washer nozzle and the vehicle. . Do not wash the same area continu- ously .
10-4 Appearance care Corrosion protection Y our SUBARU has been designed and built to resist corrosion. Special materials and protective finishes have been used on most parts of the vehicle to help maintain fine appearance, strength, and reliable operation.
Cleaning the interior Use a soft, damp cloth to clean the climate control pan el, audio equipment, instru- ment panel, center console, combination meter panel, and switches. (Do not use organic solvents.) & Seat fabric Remove loose dirt, dust or debris with a vacuum cleaner .
10-6 Appearance care & Navigation monitor (if equipped) T o clean the navigation monitor, wipe it with a silicone cloth or with a soft cloth. If the navigation monitor is extremely dirty , clean it with a soft cloth moistened with neutral detergent then carefully wipe off any remaining detergent.
Maintenance sched ule ....................................... 1 1-3 Maintenance pre cautions ................................... 1 1-3 Before checking or servicing in the engine compartment .................................................... 1 1 -4 When checking or servicing in the engine compartment (2.
Maintenance and service Clutch pedal (MT models) ................................ 1 1-33 Checking the clutch function ............................ 1 1 -3 3 Checking the clutch pedal free play .................. 1 1- 3 4 Replacement of brake pad and lining .
Maintenance schedule The s ched uled maint enan ce it ems r e- quired to be serviced at regular intervals are shown in the “ Warranty and Main- tenance Booklet ” . For details about your maintenance sche- dule, read the separate “ Warranty and Maintenance Booklet ” .
1 1-4 Maintenance and service guard against getting oil or fluids in your eyes. If something does get in your eyes, thoroughly wash them out with clean water .
& When checking or servicing in the engine compartment while the engine is running W ARNING A running engine can be dangerous. Keep your fingers, hands, clothing, hair and tools away from the cooling fan, be lts an d any oth er mov ing engine parts.
1 1-6 Maintenance and service the illustration. 2. Pull the protruded center portion to remove the entire body of the clip. ! T ype C clips 1. Turn the clip counterclockwise using a Phillips screwdriver until the center portion of the clip is raised. 2.
& Removing air intake duct Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct. Refer to “ T ype A clips ” F 1 1-5. & Pulling off the fender lining It is necessary to pull off the fender lining when replacing some bulbs.
1 1-8 Maintenance and service 3. Release the secondary hood release by moving the lever between the front grille and the hood toward the left. 4. Lift up the hood. T o close the hood: 1. Lower the hood to a height of approxi- mately 5.9 in (15 cm) above its closed position and then let it drop.
Engine compartment overview & 2.5 L non-turbo models 1) Power steering fluid reservoir (page 1 1-29) 2) Manual transmission oil level gauge (MT) (page 1 1-23) 3) Clutch fluid reservoir (page 1 1-3.
1 1-10 Maintenance and service & 2.5 L turbo models 1) Power steering fluid reservoir (page 1 1-29) 2) Manual transmission oil level gauge (MT) (page 1 1-23) 3) Clutch fluid reservoir (page 1 1-31.
& 3.6 L models 1) Power steering fluid reservoir (page 1 1-29) 2) Differe ntia l gea r oi l level gauge (A T ) (page 1 1-26) 3) Automatic transmission fluid level gauge (page 1 1-24) 4) Brake flui.
1 1-12 Maintenance and service Engine oil NOTE . When the engine low oil level warn- ing light illuminates, have your vehicle inspected by your SUBARU dealer as soon as possible. . The engine oil consumption rate is not stabilized, and therefore cannot be determined until the vehicle has tra- veled at least several thousand miles (kilometers).
2.5 L models 1) Notch 2) Full level 3) Low level 3.6 L models 1) Full level 2) Low level 4. Pull out the level gauge again and check the oil level on it. If it is below the lower level, add oil to bring the level up to the upper level. CAUTION . Use only engine oil with the recommended grade and vis- cosity .
1 1-14 Maintenance and service & Changing the oil and oil filter Change the oil and oil filter according to the maintenance schedule in the “ War- ranty and Maintenance Booklet ” .
2.5 L turbo models 3.6 L models 6. Remove the oil filter with an oil filter wrench. 7. Before installing a new oil filter , apply a thin coat of engine oil to the seal. 8. Clean the rubber seal seating area of the bottom of engine and install the oil filter by hand turning.
1 1-16 Maintenance and service & Recommended grade and viscosity CAUTION Use only engine oil with the recom- mended grade and viscosity . Oil grade: – ILSAC GF-4, which can be identified with th.
& Recommended grade and viscosity under severe driv- ing conditions If the vehicle is used in desert areas, in areas with ver y hi gh temperat ures, or used for heavy-duty applications such as towing a trailer , use of oil with the following grade and viscosities is recommended.
1 1-18 Maintenance and service & Engine coolant ! Checking the coolant level Check the coolant level at each fuel stop. 1. Check the coolant level on the outside of the reservoir while the engine is cool. 2. If the level is close to or lower than the “ LOW ” level mark, add coolant up to the “ FULL ” level mark.
1. Remove the under cover . 2.5 L models 1) Drain plug 3.6 L models 1) Drain plug 2. Place a proper container under the drain plug and loosen the drain plug. 3. Loosen the radiator cap to drain the coolant from the radiator . Then drain the coolant from the reserve tank.
1 1-20 Maintenance and service 6. Pour the coolant and fill to the reser- voir tank ’ s “ FULL ” level mark. 7. Put the ra diato r cap bac k on an d tighten firmly . At this time, make sure that the rubber gasket in the radiator cap is correctly in place.
& Replacing the air cleaner element Replace the air cleaner element according to the maintenance schedule in the “ W arranty and Maintenance Booklet ” . Un- der extremely dusty conditions, replace it more frequently . It is recommended that you always use genuine SUBARU parts.
1 1-22 Maintenance and service ! T urbo models 1. Unsnap the two clamps holding the air cleaner case cover. 2. Open the air cleaner case cover and remove the air cleaner element. 3. Clean the inside of the air cleaner cover and case with a damp cloth and install a new air cleaner element.
Drive belts It is unnecessary to check the deflection of the drive belt periodically because your engine is equipped with an automatic belt tension adjuster . However , replacement of the belt should be done according to the maintenance schedule in the “ Warranty and Maintenance Booklet ” .
1 1-24 Maintenance and service 1) Upper level 2) Lower level 3. Pull out the level gauge again and check the oil level on it. If it is below the lower level, add oil through the level gauge hole to bring the level up to the upper level. CAUTION Be careful not to spill manual trans- mission oil when adding it.
1) Y ellow handle 1) HOT range 2) COLD range 3) Upper level 4) Lower level 4. Pull out the level gauge and check the fluid level on the gauge. If it is below the lower level on the “ HOT ” range, add the recommended automatic transmission fluid up to the upper level.
1 1-26 Maintenance and service Continuously variable trans- mission fluid There is no continuously variable trans- mission fluid level gauge. It is unneces- sary to check the continuously variable transmission fluid level. However , if ne- cessary , we recommend that you consult your SUBARU dealer for inspection.
& Recommended grade and viscosity Each oil manufacturer has its own base oils and additives. Never use different brands together . Oil grade: API classification GL-5 SAE viscosity No.
1 1-28 Maintenance and service 3.6 L models 1) Filler plug 2) Drain plug 3) Oil level Others 1) Filler plug 2) Drain plug 3) Oil level Remove the plug from the filler hole and check the oil level. The oil level should be kept even with the bottom of the filler hole.
SAE viscosity No. and applicable tempera- ture Power steering fluid & Checking the fluid level W ARNING Be careful not to burn yourself because the fluid may be hot. CAUTION . When power steering fluid is being added, use only clean fluid, and be careful not to allow any dirt into the tank.
1 1-30 Maintenance and service 2. Check the fluid level of the reservoir tank. When the fluid is hot after the vehicle has been ru n: Che ck tha t the o il lev el is between “ HOT MIN ” and “ HOT MAX ” on the surface of the reservoir tank.
Check the fluid level on the outside of the reservoir . If the level is below “ MIN ” , add the recommended brake fluid to “ MAX ” . Use only brake fluid from a sealed container . & Recommended brake fluid FMVSS No. 116, fresh DOT 3 or 4 brake fluid CAUTION Never use different brands of brake fluid together .
1 1-32 Maintenance and service Use only clutch fluid from a sealed container . & Recommended clutch fluid FMVSS No. 116, fresh DOT 3 or 4 brake fluid CAUTION Avoid mixing DOT 3 and DOT 4 brake fluids even if they are of the same brand.
Brake pedal Check the br ak e pedal free play an d reserve distance according to the main- tenance schedule in the “ Warranty and Maintenance Booklet ” . & Checking the brake pedal free play 1) 0.08 – 0.18 in (2 – 5 mm) Stop the engine and firmly depress the brake pedal several times.
1 1-34 Maintenance and service & Checking the clutch pedal free play 1) 0.19 – 0.44 in (5 – 1 1 mm) Lightly press the clutch pedal down with your finger until you feel resistance, and check the free play . If the free play is not within proper specification, contact your SUBARU deal- er .
Tires and wheels & T ypes of tires Y ou should be familiar with type of tires present on your vehicle. ! All season tires The factory-installed tires on your new vehicle except 2.
1 1-36 Maintenance and service Rear: 32 psi (220 kPa, 2.2 kgf/cm 2 ) Garage temperature: 60 8 F (15.6 8 C) Outside temperature Adjusted pressure [psi (kPa, kgf/cm 2 )] Front Rear 30 8 F( − 1 8 C) 36 (250, 2.5) 35 (240, 2.4) 10 8 F( − 12 8 C) 38 (265, 2.
mately one minute. This indicates the TPMS is unable to monitor all four road wheels. Contact your SUBARU dealer as soon as possible for tire and sensor replacement and/ or system resetting. If the light illuminates steadily after blinking for approximately one minute, promptly contact a SUBARU dealer to have the system inspected.
1 1-38 Maintenance and service NOTE . The air pressure in a tire increases by approximately 4.3 psi (30 kPa, 0.3 kgf/cm 2 ) when the tire becomes warm. . The tires are considered cold when the vehicle has been parked for at least 3 hours or has been driven less than 1 mile (1.
. Abnormally high tire pressure (tread worn in center) Ride comfort is poor . Also, the tire magnifies the effects of road-surface bump s and dip s, po ssib ly res ulti ng in vehicle damage. W ARNING Driving at high speeds with exces- sively low tire pressures can cause the tires to deform severely and to rapidly become hot.
1 1-40 Maintenance and service cause the vehicle to hydroplan e. The resulting loss of vehicle control can lead to an accident. NOTE For safety , inspect the tire tread reg- ularly and replace the tires before their tread wear indicators become visible.
& Tire replacement The wheels and tires are important and integral parts of your vehicle ’ s design; they cannot be changed arbitrarily . The tires fitt ed as st andard equi pment are optimally .
1 1-42 Maintenance and service Aluminum wheels Aluminum wheels can be scratched and damaged easily . Handle them carefully to maintain their appearance, performance, and safety .
In areas where water freezes in winter, use an anti-freeze type windshield washer fluid. SUBARU Windshield Washer Fluid contains 58.5% methyl alcohol and 41.5% surfactant, by volume. Its freezing tem- perature varies according to how much it is diluted, as indicated in the following table.
1 1-44 Maintenance and service . Return the passenger-side wiper arm to its original position before returning the driver-side wiper arm to i ts original position. Otherwise, the passenger-side wiper assembly and driver-side wiper assembly will touch each other , possibly resulting in scratches.
1) Metal spines 2. If the new blade rubber is not provided with two metal spines, remove the metal spines from the old blade rubber and install them in the new blade rubber . 3. Align the claws of the support with the grooves in the rubber and slide the blade rubber assembly into the support until it locks.
1 1-46 Maintenance and service 3. Pull the wiper blade assembly toward you to remove it from the wiper arm. & Rear window wiper blade rubber (Outback) 1. Pull out the end of the blade rubber assembly to unlock it from the plastic support. 2. Pull the blade rubber assembly out of the plastic support.
4. Align the claws of the plastic support with the grooves in the blade rubber assembly , then slide the blade rubber assembly into place. Securely retain both ends of the rubber with the stoppers on the plastic support ends. If the rubber is not retained properly , the wiper may scratch the rear window glass.
1 1-48 Maintenance and service remove rings, metal watchbands, and other metal jewelry . Never allow metal tools to contact the positive battery terminal and any- thing connected to it WHILE you are at the same time in contact with any other metallic portion of the vehicle because a short cir- cuit will result.
The other one is housed in the engine compartment. The spare fuses are stored in the main fuse box cover in the engine compart- ment. The fuse puller is stored in the main fuse box in the engine compartment. 1) Good 2) Blown If any lights, accessories or other electrical controls do not operate, inspect the corresponding fuse.
1 1-50 Maintenance and service Main fuse Main fuse box The main fuse s are designed to melt during an overload to prevent damage to the wiring harness and electrical equip- ment. Check the main fuses if any electrical component fails to operate (ex- cept the starter motor) and other fuses are good.
prints or grease on the bulb surface, wipe them away with a soft cloth moistened with alcohol. NOTE . If headlight aiming is required, con- sult your SUBARU dealer for proper adjustment of the headlight aim. . It may be difficult to replace the bulbs.
1 1-52 Maintenance and service ! High beam light bulbs 1. Remove the air intake duct (right-hand side). For the method to remove the air intake duct, refer to “ Removing air intake duct ” F 1 1-7. Left-hand side 2. Use a screwdriver to remove the secured clip of the washer tank.
& Front turn signal light NOTE It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary . 1. Turn over the protective cover of the engine compartment. 2. T urn the socket counterclockwise and pull it out.
1 1-54 Maintenance and service 2. Disconnect the electrical connector . 1) For left-hand side 2) For right-hand side 3. Turn the socket clockwise (right-hand side) or counterclockwise (left-hand side). 4. Pull out the socket. 5. Pull out the bulb from the socket and replace the bulb with a new one.
1) Brake/tail and rear side marker light 2) Rear turn signal light 3) Back-up light 2. Remove the bulb holder from the rear combination light assembly by turning it counterclockwise. Use pliers if necessary . 3. Pull the bulb out of the bulb holder and replace it with a new one.
1 1-56 Maintenance and service 1) T ail and rear side marker light 2) Brake light 3) Rear turn signal light 5. Remove the bulb holder from the rear combination light assembly by turning it counterclockwise. 6. Pull the bulb out of the bulb holder and replace it with a new one.
1) Back-up light 2) T ail light 2. Turn the bulb socket counterclockwise and remove it. 3. Pull the bulb out of the bulb socket and replace it with a new one. 4. Install the bulb socket by turning it clockwise. 5. Install the light cover on the rear gate.
1 1-58 Maintenance and service ! Outback 1. Remove the mounting screws using a Phillips screwdriver . 2. Remove the lens. 3. Pull the bulb out of the socket. 4. Install a new bulb. 5. Reinstall the lens. 6. T ighten the mounting screws. & Dome light 1.
& Map light 1. Remove the lens by prying the edge of the lens with a flat-head screwdriver . 2. Turn the bulb until the flat surfaces at its ends are aligned vertically . Pull the bulb straight downward to remove it. 3. Install a new bulb. 4. Reinstall the lens.
1 1-60 Maintenance and service & Door step light 1. Remove the lens by prying the edge of the lens with a flat-head screwdriver . 2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Reinstall the lens. & Cargo area light (Outback) 1.
Specifications ..................................................... 12- 2 Dimensions ........................................................ 1 2 - 2 Engine ............................................................... 12 - 3 Electrical system ....
12-2 Specifications Specifications These specifications are subject to change without notice. & Dimensions in (mm) Item Legacy Outback 2.5 L non-turbo 2.5 L turbo 3.6 L 2.5 L non-turbo 3.6 L Drive system AWD T ransmission type MT CVT MT A T MT CVT A T Overall length 186.
& Engine Engine model EJ253 (2.5 L, SOHC, non-turbo) EJ255 (2.5 L, DOHC, turbo) EZ36D (3.6 L, DOHC, non-turbo) Engine type Horizontally opposed, liquid cooled 4 cylinder , 4 stroke gasoline engine Horizontally opposed, liquid cooled 6 cylinder , 4 stroke gasoline engine Displacement cu-in (cc) 150 (2,457) 222 (3,630) Bore 6 Stroke in (mm) 3.
12-4 Specifications & Capacities Fuel tank 18.5 US gal (70 liters, 15.4 Imp gal) Engine oil 2.5 L models 4.2 US qt (4.0 liters, 3.5 Imp qt) 3.6 L models 6.7 US qt (6.3 liters, 5.5 Imp qt) T ransmission oil (MT) 3.9 US qt (3.7 liters, 3.3 Imp qt) T ransmission fluid (CVT) 13.
& Tires T ire size P205/60R16 91V P215/70R16 99S P225/60R17 98T P215/50R17 90V P225/50R17 93V 225/45R18 91W Wheel size 16 6 6 1/2JJ 16 6 6 1/2J 16 6 6 1/2JJ 17 6 7J 17 6 7 1/2J 18 6 7 1/2J Pressur.
12-6 Specifications Fuses and circuits & Fuse panel located in the passenger compartment Fuse panel Fuse rating Circuit 1 15A . Trailer hitch connector 2 20A . Rear power window (left side) 3 20A . Power window (driver ’ s side) 4 7.5A . Navigation system .
Fuse panel Fuse rating Circuit 13 20A . Socket 14 Empty 15 20A . Rear power window (right side) 16 Empty 17 15A . Front wiper deicer 18 7.5A . Back-up light 19 7.5A . Electronic parking brake unit . Hill Holder system unit 20 10A . Accessory power outlet 21 7.
12-8 Specifications & Fuse panel located in the engine compartment A) Main fuse Fuse panel Fuse rating Circuit 1 7.5A . CVT control unit 2 7.5A . Horn LO 3 7.5A . Horn HI 4 15A . Low beam headlight (right side) 5 15A . Low beam headlight (left side) 6 20A .
Fuse panel Fuse rating Circuit 13 15A . Engine control unit 14 15A . Ignition coil 15 15A . Engine control unit 16 15A . Engine control unit 17 15A . Automatic transmission control unit 18 10A . Illumination 19 10A . Rear combination light 20 15A . Turn and hazard warn- ing flasher (body control unit) 21 20A .
12-10 Specifications Bulb chart NOTE Lights A and B are the LED (Light Emitting Diode) type. Consult your SUBARU dealer for replacement..
W attage Bulb No. 1) High beam headlight 12V -60W HB3 (9005) 2) Front position light 12V -5W W5H 3) Low beam headlight 12V -55W H7 4) Front turn signal light 12V -21W W21W 5) Map light 12V-8W 6) Dome light 12V -8W 7) Door step light 12V -5W W5W 8) Front fog light 12V -55W H1 1 9) Front side marker light 12V -5W W5W 10) V anity mirror light 14V -1.
12-12 Specifications W attage Bulb No. 16) Brake light (Outback) 12V -21W W21W 17) T ail and rear side marker light (Outback) 12V -5W W5W 18) Trunk light (Legacy) 12V -5W W5W 19) T ail light (Legacy) .
V ehicle identification 1) Emission control label 2) V ehicle identification number 3) Certification and bar code label 4) Tire inflation pressure label 5) V ehicle identification number plate 6) Mode.
—————————————— ——————————————— ——————————— —————————————— ———————————.
For U.S.A. ........................................................... 13- 2 Tire information .................................................. 13-2 Tire labeling ....................................................... 1 3 -2 Recommended tire inflation pressure .
13-2 Consumer information and Reporting safety defects For U.S.A. The following information has been compiled according to Code of Federal Regulations “ T itle 49, Part 575 ” . Tire information & Tire labeling Many markings (e.g. T ire size, T ire Identification Number or TIN) are placed on the sidewall of a tire by tire manufacturers.
Example: (6) Load Index: A numerical code which specifies the maximum load a tire can carry at the speed indicated by its speed symbol, at maximum inflation pressure.
13-4 Consumer information and Reporting safety defects ! Maximum load rating The load rating at the maximum permissible weight load for this tire. For example, “ MAX. LOAD 615 kg (1,356 LBS) @ 350 kpa (51 PSI) MAX. PRESS. ” W ARNING Maximum load rating applies only to the tire, not to the vehicle.
& Recommended tire inflation pressure ! Recommend ed cold tire inflation pressure Recommended cold tire inflation pressure for your vehicle ’ s tires is as follows.
13-6 Consumer information and Reporting safety defects ! V ehicle placard The vehicle placard is affixed to the driver ’ s side B-pillar . Example: U.
& Glossary of tire terminology . Accessory weigh t The combined weight (in excess of those standard items which may be replaced) of automatic transmis- sion, power steering, power brakes, power windows, power seats, radio, and heater , to the extent that these items are available as factory-in- stalled equipment (whether in- stalled or not).
13-8 Consumer information and Reporting safety defects ing on a vehicle. . Light truck (L T) tire A tire designated by its manufac- turer as primarily intended for use on lightweight trucks or multipur- pose passenger vehicles. . Load rating The maximum load that a tire is rated to carry for a given inflation pressure.
sory weight, including heavy duty brakes, ride leveler s, roof rack, heavy duty battery , and special trim. . Radial ply tire A pneumatic tire in which the ply cords that extend to the beads are laid at substantially 90 degrees to the centerline of the tread.
13-10 Consumer information and Reporting safety defects accessory weight, and normal oc- cupant weight (distributed in accor- dance with T able 1 that is ap- pended to the end of this section) and dividing by 2. . Wheel-holding fixture The fixture used to hold the wheel and tire assembly securely during testing.
& Tire care – maintenance and safety practices . Check on a daily basis that the tires are free from serious damage, nails, and stones. At the same time, check the tires for abnormal wear . . Inspect the tire tread regularly and replace the tires before their tread wear indicators become visi- ble.
13-12 Consumer information and Reporting safety defects ! Calculating total and load ca- pacities var ying seating con- figurations Calculate the available load capa- city as shown in the following ex.
2. Calculate the available load ca- pacity . 3. The total weight now exceeds the capacity weight by 81 lbs (37 kg), so the cargo weight must be reduced by 81 lbs (37 kg) or more.
13-14 Consumer information and Reporting safety defects vehicle (bringing the number of occupants to three), and a child restraint system weighing 1 1 lbs (5 kg) is installed in the vehicle for the child to use, the calculations are as follows: 1. Calculate the total weight.
. V ehicle stability will deteriorate. . Heavy and/or high-mounted loads could increase the risk of rollover . . Stopping distance will increase. . Brakes could overheat and fail. . Suspension, bearings, axles and other parts of the body could break or experience accelerated wear that will shorten vehicle life.
13-16 Consumer information and Reporting safety defects form to Fede ra l Safety Requ ire- ments in addition to these grades. & T readwear The treadwear grade is a compara- tive rating based on the wear rate of the tire when tested under con- trolle d conditio ns on a specifie d government test course.
Reporting safety defects (USA) If you believe that your vehicle has a defect which could c ause a crash or could cause injury or death, you should immediately in- form the National Highway Traffi c Safety Administration (NHTSA) in addition to notifyi ng Subaru of America, Inc.
—————————————— ——————————————— ——————————— —————————————— ———————————.
Index 14.
14-2 Index A ABS (Anti-lock Brake System) ..................................... 7- 25 W arning light ................................................. 3- 16 , 7 - 25 Accessories ....................................................... 5- 4 , 1 1 - 50 Accessory power outlet .
System ................................................................. 7- 24 Brake pedal Free play ............................................................. 1 1- 33 Reserve distance .................................................. 1 1- 33 Brake system .
14-4 Index Climate control system Automatic ................................................................ 4 - 8 Manual ................................................................... 4 -4 Clock ..................................................
Electrical system ........................................................ 12 - 3 Electronic Brake Force Distribution (EBD) system ........................................................... 3 -1 8, 7 - 26 Electronic parking brake. ...................
14-6 Index Front seat ............................................................... 1 - 5 Rear seat .............................................................. 1 - 10 Headlight ......................................................... 3 -2 7, 1 1 -5 0 Flasher .
Dome ........................................................... 6- 2, 1 1 -5 8 Door step ............................................................. 1 1 -6 0 Front fog ...................................................... 3 - 30 , 1 1- 53 Front position .
14-8 Index P Parking ..................................................................... 7 -3 3 Brake ................................................................... 7- 34 T ip s ..................................................................
Headlight ............................................................. 1 1 -5 0 License plate light ................................................. 1 1 -5 7 Map light .............................................................. 1 1 -5 9 Rear combination light .
14-10 Index Sun visors ................................................................... 6- 4 Supplemental Restraint System airbag (SRS) ................ 1 -3 8 Synthetic leather upholstery ........................................ 1 0 -5 T T achometer .
W W arning and indicator lights .......................................... 3 -9 W arning light A BS ............................................................. 3- 16 , 7 -2 5 All-Wheel Drive ...................................................... 3- 20 A T OIL TEMP .
—————————————— ——————————————— ——————————— —————————————— ———————————.
—————————————— ——————————————— ——————————— —————————————— ———————————.
—————————————— ——————————————— ——————————— —————————————— ———————————.
—————————————— ——————————————— ——————————— —————————————— ———————————.
—————————————— ——————————————— ——————————— —————————————— ———————————.
—————————————— ——————————————— ——————————— —————————————— ———————————.
—————————————— ——————————————— ——————————— —————————————— ———————————.
10 9 8 7 6 5 4 3 11 12 13 000134.
GAS ST A TION REFERENCE & Fuel: ! Non-turbo models Use only unleaded gasoline with an octane rating of 87 AKI or higher . ! T urbo models Use premium unleaded gasoline with an octane rating of 93 AKI or higher .
An important point after buying a device Subaru Legacy (2010) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Subaru Legacy (2010) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Subaru Legacy (2010) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Subaru Legacy (2010) you will learn all the available features of the product, as well as information on its operation. The information that you get Subaru Legacy (2010) will certainly help you make a decision on the purchase.
If you already are a holder of Subaru Legacy (2010), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Subaru Legacy (2010).
However, one of the most important roles played by the user manual is to help in solving problems with Subaru Legacy (2010). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Subaru Legacy (2010) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
