Instruction/ maintenance manual of the product R5975039 Barco
Go to page of 50
OWNER'S MANUAL R9002130 R9002139 VISION 508.
Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, December 1998. All rights reserved. Trademarks are the rights of their respective owners. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.
BARCO PROJECTION SYSTEMS Date : 071298 OWNER'S MANUAL Rev : 02 Art. No. : R5975039 R9002130 R9002139 VISION 508.
Table of Contents i-1 5975039 BARCOVISION 508 100698 i T ABLE OF CONTENTS TABLE OF CONTENTS .......................................... I-1 SAFETY INSTRUCTIONS ...................................... 1-1 On safety .......................................
Safety Instructions 1-1 5975039 BARCOVISION 508 120198 WARNING TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE FEDERAL COMMUNICATION COMMISSION (FCC STATEMENT) This equipment has been tested and found to comply with the limits of a class A digital device, pursuant to Part 15 of the FCC Rules.
Safety Instructions 1-2 5975039 BARCOVISION 508 120198 A. Mains lead (Power cord) with CEE 7 plug : The wires of the mains lead are colored in accordance with the following code. Green and yellow:earth (safety earth) Blue: neutral Brown: line (live) B.
Location and Functions of Control 2-1 5975039 BARCOVISION 508 100698 2 LOCA TION AND FUNCTIONS OF CONTROL Rear Panel Terminology Communication port (800 peripherals) allows communication between the RCVDS switcher and the projector. allows connection of a remote IR receiver unit to the projector.
Location and Functions of Control 2-2 5975039 BARCOVISION 508 100698 Control panel terminology a. The local keypad Gaining access The local keypad is at the rear side of the projector. b. RCU control panel terminology This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the projector remotely .
Location and Functions of Control 2-3 5975039 BARCOVISION 508 100698 BARCO key : When a RF-tuner is built in (option), this key used to toggle between Video and tuner signal. ADJ. : adjust key, to enter or exit the adjustment mode. Address key (recessed key), to enter the address of the projector (between 0 and 9).
Connections 3-1 5975039 BARCOVISION 508 120198 CONNECTIONS Power (mains) cord connection Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector at the rear of the projector. The projector is switched ON and OFF using the power (mains) switch ON/OFF.
Connections 3-2 5975039 BARCOVISION 508 120198 Connecting a Composite Video source. Composite video signals from a VCR, OFF air signal decoder, etc.. Video input selection : a. with the RCU : press digit button 1 or b. with the local keypad. - press ADJUST key, the General access menu is displayed on the screen.
Connections 3-3 5975039 BARCOVISION 508 120198 Input selection a. with the RCU : press digit button 2 or b. with the local keypad. - press ADJUST key, the General access menu is displayed on the screen. - use the control disc to highlight 2 . - press ENTER to select the highlighted source.
Connections 3-4 5975039 BARCOVISION 508 120198 Connecting a Component source. YUV analog input terminals with sync input or with sync on the luminance (Y) input. YsUV or YUVS input selection a. Press digit button 6 (for YsUV) or 7 (for YUVS) on the RCU or b.
Connections 3-5 5975039 BARCOVISION 508 120198 Connecting a RCVDS 05 switcher to the projector. - Up to 10 inputs (20 inputs when video and S-video) with the RCVDS 05 switcher and up to 90 inputs when 10 RCVDS switchers are linked via the expansion modules.
Controlling 4-1 5975039 BARCOVISION 508 100698 4 CONTROLLING Battery installation in the RCU. A new battery is delivered inside the plastic bag with the power cord. Before using the RCU, install first the battery. Remove the battery cover on the backside of the remote control by pushing the indicated handle a little to the bottom of the RCU.
Controlling 4-2 5975039 BARCOVISION 508 100698 The projector can be controlled with a. The RCU b. The hardwired RCU (cable not included) c. The local keypad.
Controlling 4-3 5975039 BARCOVISION 508 100698 To continue using the RCU, it is necessary to enter an address with the digit buttons (address between 0 and 9). For example : if the Address key displays projector address 003, the press "3" digit button on the RCU to set the RCU's address to match the projector's address.
Controlling 4-4 5975039 BARCOVISION 508 100698 Picture controls The picture controls can be adjusted with : a) The RCU. The control keys are located on the left side of the key panel of the RCU and indicated with the name of the control and an icon. When an image control is pressed, a text box with bar scale and the function name of the control, e.
Controlling 4-5 5975039 BARCOVISION 508 100698 Sound control with the RCU (optional). Only available when the tuner option is installed. When an analog sound control is pressed, a bar scale and a number below the bar scale appear on the screen with name of the control, e.
Start Up of the Adjustment Mode 5-1 5975039 BARCOVISION 508 120198 ST ART UP OF THE ADJUSTMENT MODE Adjustment mode All picture geometry and convergence adjustments are made while in the 'Adjustment mode'. Two possible ways to enter the adjustment mode : a) Using the RCU.
Start Up of the Adjustment Mode 5-2 5975039 BARCOVISION 508 120198 RANDOM ACCESS - Random Access should be selected if the user intends to make only a few adjustments. SERVICE - Service should be selected if the user intends to delete blocks, change password or apply information.
Random Access Adjustment Mode 6-1 5975039 BARCOVISION 508 071298 RANDOM ACCESS ADJUSTMENT MODE Starting up the random access adjustment mode. Push the control disc up or down to highlight "RANDOM AC- CESS" and then press ENTER . Some items in the Random access mode are password protected (when the password function is enabled).
Random Access Adjustment Mode 6-2 5975039 BARCOVISION 508 071298 Selecting Setup Pattern If an external source is connected to the projector, this menu will be displayed. Push the control disc up or down to highlight the desired setup pattern and then press ENTER .
Random Access Adjustment Mode 6-3 5975039 BARCOVISION 508 071298 Color Balance The Color Balance function is used to select or adjust the color temperature of white used by the projector. The Color Balance can be adjusted on two different ways : - fixed color balance.
Random Access Adjustment Mode 6-4 5975039 BARCOVISION 508 071298 Select with or then <ENTER> <EXIT> to return. RANDOM ACCESS ADJUSTMENT MODE PICTURE TUNING GEOMETRY CONVERGENCE COLOR SELECT Geometry Adjustments The geometry adjustments have to be done only on the green image.
Random Access Adjustment Mode 6-5 5975039 BARCOVISION 508 071298 Note : No horizontal phase adjustment is available on the internal # pattern. For external sources : If the raster shift is correctly adjusted, the H Phase text box is projected in the middle of the raster.
Random Access Adjustment Mode 6-6 5975039 BARCOVISION 508 071298 Warning : In order to ensure maximum CRT longevity and to avoid CRT damage, do not shift the raster outside the phosphor area of the CRT.
Random Access Adjustment Mode 6-7 5975039 BARCOVISION 508 071298 Select with or then <ENTER> <EXIT> to return. LEFT-RIGHT (E-W) V CENTERLINE BOW V CENTERLINE SKEW BOW KEYSTONE Left-Right (east-west) Adjustments Left-right and center adjustments affect only the vertical lines of the projected image.
Random Access Adjustment Mode 6-8 5975039 BARCOVISION 508 071298 Select with or then <ENTER> <EXIT> to return. Top-Bottom (north-south) Adjustments Top-Bottom and center adjustments affect only the horizontal lines of the projected image.
Random Access Adjustment Mode 6-9 5975039 BARCOVISION 508 071298 Horizontal Size Adjustment Push the control disc up or down to highlight H SIZE on the Geometry menu and then press ENTER . ENTER will select horizontal size adjustment. EXIT returns to random access adjustment mode menu.
Random Access Adjustment Mode 6-10 5975039 BARCOVISION 508 071298 Blanking Adjustments Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and to hide or black out unwanted information (or noise).
Random Access Adjustment Mode 6-11 5975039 BARCOVISION 508 071298 Select with or then <ENTER> <EXIT> to return. BLANKING TOP BOTTOM LEFT RIGHT Adjust the next blanking alignments until the image is correctly framed or the unwanted information is blanked out.
Random Access Adjustment Mode 6-12 5975039 BARCOVISION 508 071298 Convergence Adjustment Convergence adjustments affect both the horizontal and vertical lines of the setup pattern. These adjustments are performed on the red image while superimposed on the green image and then on the blue image while superimposed on the green image.
Service Mode 7-1 5975039 BARCOVISION 508 120198 7 SERVICE MODE Starting up the Service mode. Use the control disc to highlight 'Service' and then press ENTER . Some items in the Service mode are password protected (when the password function is active).
Service Mode 7-2 5975039 BARCOVISION 508 120198 Projector Set-up Highlight 'Projector Set-Up' by pushing the control disc up or down and press ENTER to display the projector set-up menu.
Service Mode 7-3 5975039 BARCOVISION 508 120198 Total Run Time Highlight 'Total Run Time' with the control disc and press ENTER to display the amount of time the projector has played since its first start up at the factory. Note : all projectors leave the factory after a burn-in period of approximately 100 hours.
Service Mode 7-4 5975039 BARCOVISION 508 120198 Change baudrate The communication speed between projector and computer has 8 possible speeds. The baud rate speed can be software set up. Highlight 'Change Baudrate' by pushing the control disc up or down and press ENTER to display the Baud rate menu.
Service Mode 7-5 5975039 BARCOVISION 508 120198 Copy a block The copy a block function copies the settings of a selected block into the active block. Highlight copy a block with the control disc and press ENTER . ENTER will select the highlighted item.
Service Mode 7-6 5975039 BARCOVISION 508 120198 Select with or then <ENTER> <EXIT> to return. MEMORY MANAGEMENT COPY A BLOCK DELETE A BLOCK DELETE ALL BLOCKS ALL SETTINGS TO MIDPOS R & B CONVERGENCE MID GR CONVERGENCE MID Deletion of all blocks Highlight 'delete all blocks' with the control disc and press ENTER .
Service Mode 7-7 5975039 BARCOVISION 508 120198 R & B convergence mid Item is password protected. Highlight 'R & B convergence mid' with the control disc and press ENTER to set all convergence settings to their midposition. A confirmation screen will be displayed first.
Service Mode 7-8 5975039 BARCOVISION 508 120198 Common Settings Highlight 'Common settings' by pushing the control disc up or down and press ENTER to display the common settings menu.
Service Mode 7-9 5975039 BARCOVISION 508 120198 the CRT run in cycle will start when pressing ENTER. If no such a block is available, the projector cannot run the CRT run in option and leaves the adjustment mode. If you still want to run CRT run in cycle, create first a memory block on an internal # pattern and restart the CRT run in option.
Options 8-1 5975039 BARCOVISION 508 100698 IR Receiver 800 This infrared receiver unit makes it possible to control the projector from another room. There is a communication line with cable between the IR receiver and the projector or the RCVDS05. The control information from the RCU can now be sent to this IR receiver.
Options 9-2 5975039 BARCOVISION 508 100698 Tuner kit With one of the four available tuner kits, it is possible to receive RF signals from a TV cable network or a TV antenna. The four kits are designed to fulfil the different broadcasting systems worldwide.
Tuner Mode A-1 5975039 BARCOVISION 508 100698 A TUNER MODE Tuner mode With one of the four available tuner kits, it is possible to receive RF signals from a TV cable network or a TV antenna. The four kits are designed to fulfil the different Broadcasting systems worldwide.
Tuner Mode A-2 5975039 BARCOVISION 508 100698 The projector displays the General access menu . Use the control disk to highlight TUNER and press ENTER . The last selected channel will be displayed. To switch to another channel, push the control disc up or down.
Tuner Mode A-3 5975039 BARCOVISION 508 100698 Auto Search All channel information will be overwritten and the channel list will be reorganised completely.
Tuner Mode A-4 5975039 BARCOVISION 508 100698 Organise Channel List Once the TV frequencies are entered in the channel list, this list can be ordered according your own preferences. Highlight 'Organise Channel List' by pushing the control disc up or down and press ENTER to select.
Tuner Mode A-5 5975039 BARCOVISION 508 100698 Teletext This teletext function is only available when operating in tuner mode. To enter the teletext mode, press the TEXT key. The following keys on the RCU has a function in the teletext mode : TEXT : a 3 way toggle key Telet ext OFF Video O N Te let ext ON Video OFF Teletext ON Vide o ON NUM key (0 .
Insert Card i-1 5975039 BARCOVISION 508 100698 3 INSERT CARD ".
An important point after buying a device Barco R5975039 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Barco R5975039 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Barco R5975039 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Barco R5975039 you will learn all the available features of the product, as well as information on its operation. The information that you get Barco R5975039 will certainly help you make a decision on the purchase.
If you already are a holder of Barco R5975039, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Barco R5975039.
However, one of the most important roles played by the user manual is to help in solving problems with Barco R5975039. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Barco R5975039 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
