Instruction/ maintenance manual of the product BI-42S Sub-Zero
Go to page of 40
Built-In Refrigeration Design Guide.
Features and specications ar e subject to change at any time without notice. Visit subzero.com/specs for the most up-to-date information. IMPORT ANT NOTE: Throughout this guide, dimensions may vary by ± 1 / 8 " (3) . Dimensions in parentheses ar e millimeters unless otherwise specied.
subzero.com/specs | 3 BUIL T -IN REFRIGERA TION • Ener gy efcient; many models ar e ENERGY ST AR ® qualied. • Advanced water ltration and air purication systems. • NEW! French door models r equires less space for door clearance to accommodate virtually any-size kitchen.
4 | Sub-Zero Customer Car e 800.222.7820 Built-In Design Options FRAMED For the classic Sub-Zero look, choose framed custom door panels that contrast with the stainless steel full-length handles and louvered grille (shown). The framed applica- tion is an overlay model with framed design features.
subzero.com/specs | 5 Built-In Design Options FLUSH INSET The ush inset design option allows for ush door and grille panels and custom handle hardwar e. Shown with tubular handle option to match W olf built-in ovens. The ush inset application is an overlay model with ush inset panels.
6 | Sub-Zero Customer Car e 800.222.7820 Overall Dimensions ALL REFRIGERA TOR / ALL FREEZER Models BI-36R, BI-36RG and BI-36F . BUIL T -IN REFRIGERA TION 36" (914) 84" (2134) 4" (1 02) .
subzero.com/specs | 7 BUIL T -IN REFRIGERA TION Overall Dimensions OVER-AND-UNDER Models BI-30U and BI-30UG. 30" (762) 84" (2134) 4" (1 02) 50 3 / 4 " (1289) 23" (584) 23 7 / .
8 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Overall Dimensions OVER-AND-UNDER Model BI-36UFD. 36" (914) 84" (2134) 4" (1 02) 50 3 / 4 " (1289) 23" (584).
subzero.com/specs | 9 BUIL T -IN REFRIGERA TION Model BI-36S. 36" (914) 84" (2134) 4" (1 02) 73 3 / 4 " (1873) 23 7 / 8 " (606) 22 1 / 4 " (565) 7 1 / 4 " (184) 8 3 .
10 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Overall Dimensions SIDE-BY -SIDE Model BI-48S, BI-48SID and BI-48SD. 48" (1219) 84" (2134) 4" (1 02) 73 3 / 4 " .
subzero.com/specs | 11 Specications BUIL T -IN MODELS INTERIOR CAP ACITY ALL REFRIGERA TOR / ALL FREEZER R CU FT (L) F CU FT (L) BI-36R 23.5 (665) BI-36RG 23.4 (663) BI-36F 22.7 (643) OVER-AND-UNDER R CU FT (L) F CU FT (L) BI-30U 13.2 (374) 4.2 (119) BI-30UG 13.
12 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Opening Dimensions ST ANDARD INST ALLA TION 83 3 / 4 " (2127) OPENING HEIGHT 24" (610) OPENING DEPTH NOTE: Shaded line represents profile of unit.
subzero.com/specs | 13 BUIL T -IN REFRIGERA TION Opening Dimensions FLUSH INSET INST ALLA TION FLUSH INSET WIDTH MODEL W BI-36R, BI-36RG, BI-36F 38" (965) BI-30U, BI-30UG 32" (813) BI-36U, B.
14 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Opening Dimensions DUAL ST ANDARD INST ALLA TION 83 3 / 4 " (2127) OPENING HEIGHT 24" (610) OPENING DEPTH NOTE: Shaded line represents profile of unit.
subzero.com/specs | 15 BUIL T -IN REFRIGERA TION Opening Dimensions DUAL FLUSH INSET INST ALLA TION 84" (2134) FLUSH INSET HEIGHT 1 / 4 " (6) 26 3 / 16 " (665) FLUSH INSET DEPTH 2 3 / 16 " (56) *3 " (76) typical depth. Shaded areas will be visible and should be finished to match cabinetr y.
16 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Plumbing The water supply line should be located within the shaded area shown in the illustration below . The water supply line should be connected to the house supply with an easily accessible shut-off valve.
subzero.com/specs | 17 FRAMED P ANELS The framed application is an overlay model with framed design features. It is not a separate model. If the custom panel is thinner than 1 / 4 " (6) , a ller material must be added to achieve a proper t.
18 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION P ANEL MOUNTING KIT A Sub-Zero custom panel mounting kit eliminates the need for a backer and spacer panel and is avail able through an authorized Sub-Zero dealer . For local dealer information, visit the nd a showroom section of our website, subzer o.
subzero.com/specs | 19 BUIL T -IN REFRIGERA TION Custom Panels FLUSH INSET P ANELS The ush inset application is an overlay model with ush inset panels. It is not a separate model. The ush inset design allows custom panels to be installed ush with adjacent cabinets.
20 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION MODEL BI-36U, BI-36UG REFRIGERA TOR W H Door Panel 35 3 / 4 " (908) 49 15 / 16 " (1268) FREEZER W H Drawer Panel 35 3 / 4 .
subzero.com/specs | 21 BUIL T -IN REFRIGERA TION Framed Panel Dimensions MODEL BI-36S REFRIGERA TOR W H Door Panel 19 13 / 16 " (503) 69 9 / 16 " (1767) FREEZER W H Door Panel 15 7 / 16 &quo.
22 | Sub-Zero Customer Car e 800.222.7820 Overlay Panel Dimensions MODEL BI-36R, BI-36RG, BI-36F REFRIGERA TOR / FREEZER W H Overlay Panel 36" (914) 69 3 / 4 " (1772) Spacer Panel 35 1 / 8 &.
subzero.com/specs | 23 Overlay Panel Dimensions BUIL T -IN REFRIGERA TION H H H W A A A A H H W H H W H H W A A A B H H H W H W H H W W B A H H W W W H H H W A A A A H H W H H W H H W A A A B H H H W .
24 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Flush Inset Panel Dimensions MODEL BI-36R, BI-36RG, BI-36F REFRIGERA TOR / FREEZER W H Flush Inset Panel 37" (940) 69 3 / 4 &qu.
subzero.com/specs | 25 BUIL T -IN REFRIGERA TION Flush Inset Panel Dimensions MODEL BI-42UFD REFRIGERA TOR (2 P ANELS) W H Flush Inset Panels 21 3 / 8 " (543) 50 1 / 8 " (1273) Spacer Panels.
26 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Flush Inset Panels P ANEL OFFSETS The illustrations provide panel of fsets and reveals for built-in models in a ush inset application. Refer to the chart below for refer ence to the illustrations.
subzero.com/specs | 27 BUIL T -IN REFRIGERA TION Dual Installation If two units are installed side by side, a dual installation kit may be requir ed. Installations without a custom ller strip requir e a dual installation kit. If a dual installation kit is not specied, a 2" (51) ller strip is recommended between units.
28 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Dual Flush Inset Panel Dimensions MODEL BI-36R, BI-36RG, BI-36F REFRIGERA TOR / FREEZER W H Flush Inset Panel 36 1 / 2 " (927) .
subzero.com/specs | 29 BUIL T -IN REFRIGERA TION Dual Installation DUAL FLUSH INSET P ANEL OFFSETS The illustrations provide panel of fsets and reveals for built-in models in a dual ush inset application. Refer to the chart below for refer ence to the illustrations.
30 | Sub-Zero Customer Car e 800.222.7820 Dual Installation DUAL WIDE GRILLE A dual wide grille spans the entire width of both units in a dual installation and is a part of a dual installation kit. For overlay and ush inset panel dimensions for the dual wide grille, refer to the charts below .
subzero.com/specs | 31 Side Panel The custom side panels must be a minimum of 24" (610) deep and 1 / 2 " (13) thick. Routing will be necessary for the side panel to t ush against the side of the unit. Refer to the illustrations below .
32 | Sub-Zero Customer Car e 800.222.7820 Framed Panels FULL-SCALE TEMPLA TE BUIL T -IN REFRIGERA TION OPTIONAL EXTENDED FULL-LENGTH HANDLE ST ANDARD FULL-LENGTH HANDLE 1 / 4 " (6) FRAMED P ANEL .
subzero.com/specs | 33 Overlay and Flush Inset Panels FULL-SCALE TEMPLA TE Overlay and ush inset panels must be a minimum of 5 / 8 " (16) thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door .
34 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION 23 7 / 8 " (606) TO REAR OF UNIT O VERALL WIDTH OF UNIT 1 1 / 4 " (32) 1 1 / 2 " (38) 1 3 / 4 " (44) 0" (0).
subzero.com/specs | 35 BUIL T -IN REFRIGERA TION 1 1 / 4 " (32) ASSUMES 3 / 4 " (19) FLUSH INSET P ANEL THICKNESS 2 3 / 16 " (56) 24" (610) TO BA CK W ALL 3 / 4 " (19) THICK FLUSH INSET P ANEL (TYPICAL) 1 / 4 " (6) BACKER P ANEL 1" (25) THICK P ANEL 1" (25) 0" SCALE 110° door opening (top view).
36 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION 1 1 / 4 " (32) FILLER STRIP APPR OX PR OFILE OF ST AINLESS STEEL WRAPPED DOOR AND HANDLE DOOR OPEN 110° DOOR CLOSED Dual standard installation (top view).
subzero.com/specs | 37 BUIL T -IN REFRIGERA TION 1 1 / 2 " (38) 1 / 2 " (13) FILLER STRIP PROFILE OF 3 / 4 " (19) FLUSH INSET P ANEL AND TUBULAR HANDLE DOOR CLOSED DOOR OPEN 110° Dual ush inset installation (top view).
Sub-Zero Residential Limited Warranty FOR RESIDENTIAL USE FULL TWO YEAR WARRANTY* For two years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defec- tive in materials or workmanship.
Sub-Zero, Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Gr eat American Kitchens The Fine Art of Kitchen Design, and Ingredients are r egistered trademarks and service marks of Sub-Zero, Inc.
SUB-ZERO, INC. P.O. BOX 44848 MADISON, WI 53744 SUBZERO.COM 800.222.7820 SZBIDG 1/ 201 4.
An important point after buying a device Sub-Zero BI-42S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sub-Zero BI-42S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sub-Zero BI-42S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sub-Zero BI-42S you will learn all the available features of the product, as well as information on its operation. The information that you get Sub-Zero BI-42S will certainly help you make a decision on the purchase.
If you already are a holder of Sub-Zero BI-42S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sub-Zero BI-42S.
However, one of the most important roles played by the user manual is to help in solving problems with Sub-Zero BI-42S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sub-Zero BI-42S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
