Instruction/ maintenance manual of the product Strong Spas The Antigua Strong Pools and Spas
Go to page of 16
OWNER’S MANUAL P .O. Box 108 Northumberland, P A 17857 1-800-STRONG-9 1-800-787-6649 ™ 1/9/07 CAUTION: More than one GFCI used on the electrical circuit will render this spa inoperable.
T able of Contents Introduction ................................................................................................................................. 1 Safety Instructions ...................................................................
Introduction The Antigua Spa Please use this space to record the pertinent information about your new spa here: Date of Purchase: ________/________/_______ Color: _________________________________ Serial # Y our Strong Spas Spa Serial Number is located on the Control Pack box panel.
2 Spas are known for their helpful qualities such as hydrotherapy and arthritic relief. But spas are not only a toy , there are several health concerns which the owner must be aware of such as the following: W ARNING People with infectious diseases should not use a spa.
3 Spa Location: Improper installation may result in equipment damage and will void the warranty . Y our spa must be placed on a flat, level surface. The space you choose to install your spa is a very important decision, you should consider all of the listed suggestions.
4 Installation - Electrical Requirements Connections should be made using copper conductors only . The connecting wire and circuit breakers or fuses must be sized to accommodate the total ampere load as specified on the equipment module data label. Strong Pools and Spas only makes electrical recommendations, always consult a certified electrician.
Control Panel Operation 5 There are FOUR unions that may require hand tightening prior to operation of your spa. When filling the spa with water , keep observing these fittings for any slight water drips. If a drip is observed, just hand tighten until dripping ceases.
6 Startup Preparations - Make sure that if spa is equipped with gate valves, that valves are opened. (Usually found in the Antigua spas, these gate valves are easily noticed in your access area by the distinct “T” shaped handle.) - When filling your spa remove the filter , and place hose into filter area.
7 Changing Filter Cycles T roubleshooting No power to spa: 1. Check for power at outlet 2. Check reset on GFCI cord (Press test then reset) 3. Check proper connection of cord to pack 4. Check fuse in pack (.5A 250 V UDL slow blow) the thicker wire of the two fuses.
8 T roubleshooting Poor W ater Flow: 1. Clean filter 2. Check if adjustable jets (are all open) 3. May have air lock, prime pump by loosening top pump union. 4. If water diverted valves are present make sure they are all the way open. 5. If gate valves are present, make sure they are all the way open.
9 Spa Maintenance The maintenance and care of your spa is simple and easy to carry out, and if performed regu- larly as scheduled, problems will be minimal. It is important that the following procedures be read through and carried out on a regular basis for the best, long term, overall performance of your spa.
10 CONCENTRA TED CHLORINA TING GRANULES - The minimum chlorine level in the spa should be at least 2PPM (parts per million). Chlorine level should be tested frequently and the chemical added to maintain a safe level of 2PPM. This type of chemical can be added in quantities of 0.
11 Directional Jet 2” Center Pivots Directional Jet 3” Center Pivots T op Air Control V alve (Air Control V alve should be turned off when spa is not in use.
12 For current update changes on warranties, consult our website at www .strongspas.com W ARRANTIES Shell: Lifetime Plumbing: 1 year Strong Spas warrants the original retail purchaser the integrity of the spas plumbing against leaks as a result of defects in material or workmanship for a period of 1 years.
13 FOR YOUR RECORDS: For future use, it is advisable that you write down some information pertaining to the model of the spa you have purchased. If you are unsure of the model name, frame size, etc., contact your dealer immediately to acquire the information needed.
RET AIN THIS BOOKLET FOR FUTURE REFERENCE: FOR ANY MISSING P ARTS, PROBLEMS OR QUESTIONS CALL: MONDA Y THROUGH FRIDA Y 8:30 AM - 5:00 PM E.S.T . (570) 275-2700 • GIVE YOUR NAME • TELEPHONE NUMBER (AREA CODE) • NAME OF SP A • NAME OF MODEL • QUANTITY AND TYPE OF P ARTS • REASON FOR REQUEST A.
An important point after buying a device Strong Pools and Spas Strong Spas The Antigua (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Strong Pools and Spas Strong Spas The Antigua yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Strong Pools and Spas Strong Spas The Antigua - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Strong Pools and Spas Strong Spas The Antigua you will learn all the available features of the product, as well as information on its operation. The information that you get Strong Pools and Spas Strong Spas The Antigua will certainly help you make a decision on the purchase.
If you already are a holder of Strong Pools and Spas Strong Spas The Antigua, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Strong Pools and Spas Strong Spas The Antigua.
However, one of the most important roles played by the user manual is to help in solving problems with Strong Pools and Spas Strong Spas The Antigua. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Strong Pools and Spas Strong Spas The Antigua along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
