Instruction/ maintenance manual of the product 8218-2220-70 Stiga
Go to page of 11
STIGA DUO LINE Snow Rise 8218-2220-70 BRUKSANVISNING KÄYTTÖOHJEET BRUGSANVISNING BRUKSANVISNING GEBRAUCHSANWEISUNG INSTRUCTIONS FOR USE MODE D’EMPLOI ISTRUZIONI PER L´USO INSTRUKCJA OBS £ UGI »HC“P”K÷»fl œOÀ‹«Œ¬¿“EÀfl NÁVOD K POU ® ITÍ HASZNÁLATI UTASÍTÁS NAVODILA ZA UPORABO SV .
2 6 7 12 16 13 14 8 4 5 13 10 1 1 2 9 15 A B C 1 2 3.
3 D E H I H T U V F G A B 4 6 8 5 7 9.
40 ENGLISH EN 1 SYMBOLS The following symbols app ear on the machine. They are there to remind you of the care and attention required in use. This is what the symbols mean: W arning. Read and understand the owner ’ s manual before using this machine.
41 ENGLISH EN out of its place of storage. In this case ensure the door to the storage place is open. Exhaust fumes are toxic. • Never drive across a slope. Move from the top down, and from the bottom to the top. Be careful when changing direction on a slope.
42 ENGLISH EN 5. T ighten the screw (V) until the gear lever remains in the gear positions in the panel plate. 6. Set down the machine on its wheels. 3.7 CHECKING THE CON TROL WIRES The control wires might need adjusting before usin g the snow thrower for the first ti me.
43 ENGLISH EN 5 USING THE SNOW THROWER 5.1 GENERAL Never start the engine until all the above measures under ASSEMBL Y have been carried out. Never use the snow thr ower without first r eading and understanding the in structions an d all the warning and instruction stickers on the machine.
44 ENGLISH EN 5.8 AFTER USE 1. Check for loose or damaged parts. If required, change damaged parts. 2. T ighten loose screws an d nuts. 3. Brush all the snow from the machine. 4. Move all the controls backwards and forwards a few times. 5. Put the choke in position 6.
45 ENGLISH EN 7.2 ADJUSTING THE SCRAPER BLAD E AND SHOES The scraper blade and shoes gets worn after a long term of use. Adjust the scraper blade (alway s together with the shoes) until desired distance to the ground. The scraper blade and the shoes are reversible and can be used on both sides.
46 ENGLISH EN 4. Remove the object that has fastened in the auger . 5. Align the holes in the shaft and auger . 6. Remove the brok en bolt parts. 7. Assemble a new original shear bolt. 8 STORAGE Never store the snow thro wer with petr ol in the tank in a confined ar ea with bad ventilation.
www .stiga.com GGP Sweden AB · Box 1006 · SE-573 28 TRANÅS.
An important point after buying a device Stiga 8218-2220-70 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stiga 8218-2220-70 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stiga 8218-2220-70 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stiga 8218-2220-70 you will learn all the available features of the product, as well as information on its operation. The information that you get Stiga 8218-2220-70 will certainly help you make a decision on the purchase.
If you already are a holder of Stiga 8218-2220-70, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stiga 8218-2220-70.
However, one of the most important roles played by the user manual is to help in solving problems with Stiga 8218-2220-70. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stiga 8218-2220-70 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
