Instruction/ maintenance manual of the product LX-5 Barco
Go to page of 52
PR OJECT OR LX-5 USER GUIDE (lens is optional ) Getting Star ted Connection and Installa tion Netw ork Settings Operation and Settings For Custom er use : Enter below the serial No . which is located on the bott om side of the cabinet. Retain this information for future refe rence.
2 Getting Star ted IMPOR T ANT INFORMA TION About the installat ion place Do not install the projector in a place that cannot suppor t its weight securely . If the installation place is not sturdy enough, the projector could f all or ove r turn, possibly causing personal injur y .
3 - The lens for this product is optional. Do not attach the pow er cord when the lens is not atta ched. T urning on the power when no lens is attached ma y result in fire, electri c shock, or other hazards . - P ower-supply cords should be routed so that they are not likely to be w alked on or pinched by items placed upon or against them.
4 Getting Star ted PO WE R CONNECTION Safety Precautions (Cont’ d) The power supply v oltage rating of this product is A C110 V to 120 V , A C200 V to 240 V , the power cord attached conf or ms to the f ollowing power supply voltage . Use only the pow er cord designated by our deale r to ensure Safety and EMC .
5 EMC Supplement - This equipment is in conf or mity with the provisions and protection requirement s of the corresponding European Directiv es. This equipment is designed f or prof essional projector app liances and can be used in the f ollowing environments.
6 Getting Star ted Getting Star ted Saf ety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 F eatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Check the Accessories/Optional Accessories . . . . . . . 8 How to Read this Manual .
7 Ultra-high resolution, high contrast, and high quality projector Ultra-high resolution of 4096 24 00 This projector comes with a newly de veloped 1.27" and 4096 2400 pixel D-ILA (Direct-drive Image Light Amplifier) device , and ach ie ves an ultra-high resolutio n of 9.
8 Getting Star ted Accessories Pow e r C o r d F or the US market (3.3 m x 1) F or the EU market (3.3 m x 1) Wa r r a n t y C a r d ● Other items include the u ser guides and other printed materials. Accessories (Sold Separately) Projec tion lens LXD(1.
9 Burning-in of D-ILA Device o Do not allo w the same still picture to be projec ted for a long time or an abnor mally bright video ima ge to be projected Do not project still images with a high brightness or high contrast on the screen f or a long time.
10 Getting Star ted Fr ont/Right Side A Air Inlet/Filter The air inlets absorb air to cool the inter ior of the projector . A filter is mounted inside the projector to remove dirt in th e air that enters through the inl ets. Clean the filter regularly .
11 Rear G [D VI 1 to 4] T erminal This is an input ter minal for video signals. Connect it to the video output term inal of the computer . ( A P age 19, 21) H V ent Hole W ar m air ex its fro m the hole after cooling the projector . C A U T I O N : ● Do not bloc k the vent holes with papers, cloth, or soft cushions.
12 Connection and Installation Please read the following carefully when installing this unit. Optional pr ojection lens Mount the optiona l projection lens ( A Page 8).
13 Projector Installation Angle Y ou can insta ll this projector between 90 . Images will be proper ly display ed if the hor izontal angle is between the range of 5 . C A U T I O N : ● T o ceiling-mount this unit, special expertise and skills are necessar y .
14 Connection and Installation When shift amount in the ri ght direction is +50 % Install the projector su ch that the center of the lens is aligned with the 1/4 position fr om the left edge of the screen.
15 Overla ying project ed images (when zoom lens is in use) Pr ojecting images b y stacking pr ojectors The lens shift feature enab les you to use up to three stack ed projec tors at the same time.
16 Connection and Installation Screen Size and Projection Distance Adjust the distance from the lens to the screen to achie ve your desired screen size . LXD (1.5 - 1.9) Zoom lens NOTE : ● The distance indicated in the table is an estimated value when an image with a resolution of 4096 2400 is projected.
17 LXD (1:1) Short focal length lens NOTE : ● The distance indicated in the table is an esti mated value when an image with a resolution of 4096 2 400 is projected. Please use them as reference during installation. Pro jection Screen Size (Diagonal Length) Image Wid th Pr ojection distan ce 50" (Approx.
18 Connection and Installation Connection During Single-Screen Mode Displ ay The single-screen mode displays signals (up to f our signa ls) from a computer as a single video image. T o select to the single-screen mode, set “Displa y Mode” in the Setting menu to “Single”.
19 Connection Durin g Single-Screen Mode Displa y Below is the connection example f o r f ou r-ch annel signals from the computer . F or two-channe l signals from the computer, connect to th e [D VI 1] and [D VI 3] ter minals of this projector .
20 Connection and Installation Connection During T wo-Screen/Four - Screen Mode Displa y The two-screen/f our-screen mo de enables sim ultaneous displ a y of signals from two or four computers . T o select the two- screen mode, set “Display Mode ” in the Setting menu to “Double”.
21 Connection Example During T wo-Screen Mode Connection Example During Fo ur-Screen Mode NOTE : ● Depending on your D VI-D cable, the signal ma y attenuate and the image become unsta ble . ● Use of D VI-D cables compliant with the DD WG standard is recommended.
22 Network Settings Connect this projector, the computer for controlling this projector, and the switchin g hub using LAN ca bles, followed by conf iguring the network.
23 1 Check to ensure that this projecto r, computer, and switching hub are properly connected 2 Connect the power cord to the power inp ut terminal of this projector 3 Insert plug into the power outle.
24 Network Settings Set the IP address for this projector. There are 2 meth ods to set the IP address. Assigning a stat ic IP address Assigning an IP address from the DHCP Se rver Assigning a static IP address The A IP Address Setting B of this projector is set to A Static IP B (the DHCP client function is OFF) by default.
25 Setting (Chang ing) the IP address of this projector 1 Launch the Internet Explorer on the computer 2 Check if the proxy has been set in the A LAN Setting B of the Internet Expl orer A Click A .
26 Network Settings Assigning a static IP address (Cont’d) 4 Enter A http://192.168.0 .2 B in the address field of the web browser, and c lick A Go B ● A login screen for this projector appears.
27 Assigning IP Address from the DHCP Server The IP address is automa tically assigned by the DHCP server. 1 After connecting, turn on the main power. ● Refer to page 22 on the details of connectio n. ● Refer to page 23 for procedures to turn on the main power.
28 Operation and Settings If setting for this projector is not completed, refer to the “Setting Menu” ( A P age 30) upon tur ning on the power and configure the settin gs accordingly . Once the basic settings are configured, this proj ector can be used by simply perf or ming the following oper a tion procedures.
29 5 Adjust the fo cus Y ou can adj ust the focus using the A Foc u s B item of th e Lens menu. T o move the focus point c loser: Press the A + B (Near) end of A F ocus B T o m ove the focus point away: Press the A B (F ar ) end of A Fo cus B NOTE : ● The focus changes each time y ou click on the inner buttons ( / ).
30 Operation and Settings After installation and connection are complete , perform the nece ssar y adjustment and settin g. Operate the menus using the computer’ s browser to make adjustments a nd configure settings. Main Menu This menu displa ys the ON/OFF status of the power supply and inf or mation on signals input to the projecto r .
31 Item Setting V alue Description Po w e r ON OFF F or tur ning the power ON/OFF . ON : T ur ns on the power . OFF : T urns off the power . NOTE : ● The follo wing operating modes of the projector are displa yed to the right of the OFF button.
32 Operation and Settings Image Menu This menu is used f or adjusting the picture quali ty . Q denotes the factory def ault. Setting Menu (Cont’ d) Brightness Setting Convergence Lens Option Network.
33 Setting Menu This menu is used for specifying the inp ut le vel of the terminal and the displ a y mode. Q denotes the f actor y default. Setting Convergence Lens Option Network Mail Logout host PJ-.
34 Operation and Settings Con vergence Menu This menu is used f or correcting co lor shifts in t he optical system. Setting Menu (Cont’ d) Red Setting Convergence Lens Option Network Mail Logout hos.
35 Lens Menu This menu is used for adjusting th e projection lens. Zoom Setting Convergence Lens Option Network Mail Logout host PJ-1 user: root Main Image w T Focus + _ Shift LR U D Item Setting V alue Description Zoom — For adjusting the zoom ratio (screen size).
36 Operation and Settings Option Menu This menu is used f or specifying settings for flipping images and screen displays. Q denotes the factory def ault. Setting Menu (Cont’ d) Main Image Setting Conver gence Lens Option Network Mail Logout host PJ-1 user: root Flip ON OFF Back Color Blue Black Message Display Horz.
37 Netw ork Menu F or confi guring the networ k settings. Q denotes the factory def ault. Main Image Setting Conver gence Lens Option Network Mail Logout host PJ-1 user: root Host Name Setting SET Host Name L ZZZZZZZ IP Address Setting SET DHCP Client DHCP IP Address 192.
38 Operation and Settings Mail Menu This menu is f or configur ing the mail settings, which sends out an error message to the computer of the preset address when error occurs on this projector .
39 Q indicates the factory de f ault Item Setting V alue Description E-Mail Setting F or configur ing the e-ma il f eature. E-Mail Q ON OFF ON : Use the mail f eature. OFF : Do no t use the mail f eature. E-Mail Address — (Default V alue : user@localhost) F or specifyin g the destination e-mail address.
40 Operation and Settings Y ou ca n control this projector by connec ting the computer to this unit using a RS-232C cross cable (D-sub 9 pins). The commands to con trol this unit and th e response data forma t against the received commands are explained here.
41 P arameters used f or the data format The follo wing 2 types of parameters are used f or comma nd and response data: (1) ON/OFF (2) Special P arameter Each parameter is as f ollows: (1) ON/OFF Shows the status (ON or OFF) of the unit, such as PO WER and HIDE.
42 Others Cleaning and Replacing the Filter Clean the filter regularly . If the filter is s oiled, air intake efficiency ma y deter io rate, thus resulting in malfunction of th e product. Replace with a new one if the filter fails to remov e dust thoroughly or if it is damaged.
43 1 Remove the f ilter cover The filter is loca ted at the front and side of the projector unit. 2 Remove the sp onge and filter Hold the center of the filter using your fingers, and pull the filter tow ard you to remo ve it. 3 Clean the sponge and filter Remov e any dir t or dust using a vacuum cleaner .
44 Others Check the f ollowing points before sending this product for repair . The f ollowing phenomen a are not malfunctions. If there is no abn ormality on the screen whe n the phenomena below appear , they are not malfunctions .
45 Symptom Probab le Cause Corrective Action Refe rence P age Image is unusually dark or bright ● Is the brightness lev el proper ly adjusted? ● Adjust accordingly using A Brightness B of the Image menu. ● Adjust A Lamp P ower B in the Option menu.
46 Others Messages are display ed when the lamp life has e xpired and when th ere is input of signals that cannot be used. What to do when these messages are displa yed Message Cause (Details) Lamp Time Over ● Display ed when the lamp ti me has e xceeded 1500 ho urs.
47 The lamp time and warning mo de are indicated using the indicator. F or details on indi cator displays during normal ope ration, ref er to the note below . *1: The indicator lights up in red whe n in the standby mode , and in green when in the operating mode.
48 Others The latest error number appears in the Main Menu when an e rror occurs in the projector . Error deta ils are as f ollows: Latest Err or Error Number Meaning 01 The lamp does not tur n on. 02 Accumulated l amp time has exceeded 1500 hours. 06 The lamp goes off during projection.
49 General P ower supply AC 110 V to 12 0 V , AC 200 V to 24 0 V 50/60 Hz P ower consumption 1230 W (Standb y mode: 2.7 W) Current consumption Max 10.9 A (AC 110 V to 120 V) Max 6 A (AC 200 V to 240 V) Calorific power 4428 kJ/h (1058 kcal/h) Air capacity Intake: Appro x.
50 Others Pin Assignment RS-232C T erminal D VI-D T e rminal TMDS = T ransition Minimized Differential Signaling DDC = Display Data Channel Specifications (Cont’ d) 5 1 9 6 Pin No.
51 C A U T I O N : ● Using screws with dimensions other than tho se specified in the abov e diagram ma y cause the projecto r to drop or malfunction. Dimensional Outline Dra wing 663 30 127 803 30 688 (Projection lens is optional) 827 (Including the optional projection lens) 449 677 36 257.
© 2008 Barco Presentation and Simulation R9011221 PR OJECT OR LX-5_EN.book Page 52 Friday, July 4, 2008 9:35 AM.
An important point after buying a device Barco LX-5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Barco LX-5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Barco LX-5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Barco LX-5 you will learn all the available features of the product, as well as information on its operation. The information that you get Barco LX-5 will certainly help you make a decision on the purchase.
If you already are a holder of Barco LX-5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Barco LX-5.
However, one of the most important roles played by the user manual is to help in solving problems with Barco LX-5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Barco LX-5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
