Instruction/ maintenance manual of the product 4-Way ScreenWall ElectriMask Stewart Filmscreen Corp
Go to page of 24
T O THE INST ALLER : B E SURE TO LEA VE THIS MANUAL WITH THE OWNER . 4-W ay Scr eenW all ElectriMask T o the Owner Installation Instructions Operating the Screen Maintenance OWNER’S MANUAL T o the O.
Printed in U.S.A. ©2001-2005 S tewart Filmscreen Corporation S tewart Filmscreen reserves the right to make changes to the product specified in this document. From time to time, this document is updated. Current versions of documentation are posted on the S tewart Filmscreen website at www .
Content s T o the Owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Preparing the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 S tep 1. Mounting the Frame . . . . . . . . . . . . . . . . . .
Congratulations on your purchase of the finest optical viewing screen available anywhere in the world! Please take a moment to review this manual—it will help ensure you many years of trouble-free service from your new S tewart Filmscreen product.
Figure 2: 4 - Way ScreenWall ElectriMask models – sizes and weight s Note: This manual refers to “AC” to represent electrical power . Y our location may use 120 V , 220 V or other electrical power . Screen systems are manufactured using the electrical power type specified for the location.
Prep aration S pecifications regarding the individual screen dimensions, weight, mounting type, and controls are provided by the factory when the unit is ordered. Before beginning the installation: Check the specifications for the type of mounting and switch control to be used.
4-W ay ScreenW all ElectriMask: Owner ’s Manual 5 Professional mounting techniques should be used. Stewart Filmscreen Corporation cannot be liable for subst andard or faulty installations. Assembling the frame Work in a clean area, making cert ain installers have clean hands and clothes.
6 S tewart Filmscreen Corporation Figure 4: Positioning the frame Positioning the frame on the wall 1. Without the screen fabric attached, position the frame on the wall. 2. Make sure the unit is level and plumb. (Y ou may need to use shims between the brackets and the wall to achieve vertical plumb).
4-W ay ScreenW all ElectriMask: Owner ’s Manual 7 Unp acking and unrolling the screen The viewing side of the projection screen is rolled to the inside to protect the optical coating. The screen is rolled lengthwise. 1. Remove the screen from the cardboard shipping tube.
Att aching the screen to frame 1. Place the frame over the screen. 2. While lifting the frame with one hand, snap the screen into the frame. Gently allow the screen to stretch onto the snaps.
Connecting the spring tension cable 1. Locate the spring tension cables on either side of the unit. 2. Connect the baby eye snap to the eyelet on the lower bottom of the unit. See Figure 7. Y ou will need to pull the cable slightly (about 10 lbs. / 4.
10 S tewart Filmscreen Corporation Electrical hook-up is required for each mask roller motor . The vertical masking systems have one roller motor at the top. Horizont al masking systems have a roller motor at the top and one at the bottom. A motor requires standard AC power .
Inst alling the high voltage switch control (st andard) A standard 3-position wall switch is supplied. The high-voltage control is connected to the electrical source. It alternates directions of mask motion by means of the hot lead, using the 3-position switch.
12 S tewart Filmscreen Corporation Inst alling the low-voltage 3-button switch option The optional S tewart Filmscreen low-voltage control allows the use of low- voltage wire to connect to the supplied 3-position moment ary wall switch.
4-W ay ScreenW all ElectriMask: Owner ’s Manual 13 Figure 1 1: Infrared remote control wiring 3-Button Moment ary Switch Infrared Sensor Infrared Remote Control Inst alling the infrared remote control option The optional S tewart Filmscreen infrared remote control allows control of the screens from anywhere in the room.
Inst alling the Multi-Channel Infrared Remote control option The optional S tewart Filmscreen Multi-Channel Infrared Remote control allows control of the screens from anywhere in the room. Note: The distance between the hand-held remote control and the receiver can be up to 50 feet / 15 m.
4-W ay ScreenW all ElectriMask: Owner ’s Manual 15 Connecting the Video Interface Control System (VICS) Note: The VICS option should not be used for the horizontal masking system. The VICS enables up and down operation of the mask in conjunction with a projector , tuner , VCR, cable box, or switched AC outlet.
1. Attach the ScreenW all ElectriMask to the wall using the appropriate fasteners (hex lag screws, wall anchors, molly bolts, wood carriage screws, etc.) through the wall mounting brackets. 16 S tewart Filmscreen Corporation Figure 14: Hanging the screen S TEP 3.
The method you use to raise and lower a mask depends on the type of switch control device you have selected. When you lower or retract a mask, it will stop at its preset limit. Note: The horizontal masking p anels move more slowly than the vertical masking panels.
18 S tewart Filmscreen Corporation Modifying the extension of the mask Y ou can increase the extension of a mask up to 3" / 7.6 cm past the factory preset stop, or you can decrease the extension from the factory preset stop. Do not attempt to modify a mask extension beyond these recommended amounts.
Replacement p arts and service No user-serviceable part s are contained within the unit. Contact your dealer or the factory if you require part replacement or service. 4-W ay ScreenW all ElectriMask: Owner ’s Manual 19 With reasonable care, you can expect many years of trouble-free use of your S tewart projection screen.
Refer to the following guidelines if you encounter a difficulty in the operation of your S tewart Filmscreen. Problems related to electrical or motor function may require a qualified service person or electrician. Should you have a problem that is not addressed here, call the S tewart Filmscreen Corporation.
This warranty covers defects in materials and workmanship for a period of one (1) year from the date of installation, not to exceed fif teen (15) months from the date of shipment, provided this product is installed in a normal environment and maintained according to written instructions in the product Owner ’s Manual.
www .stewartfilm.com 1-800-762-4999 Fax (310) 326-6870.
An important point after buying a device Stewart Filmscreen Corp 4-Way ScreenWall ElectriMask (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stewart Filmscreen Corp 4-Way ScreenWall ElectriMask yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stewart Filmscreen Corp 4-Way ScreenWall ElectriMask - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stewart Filmscreen Corp 4-Way ScreenWall ElectriMask you will learn all the available features of the product, as well as information on its operation. The information that you get Stewart Filmscreen Corp 4-Way ScreenWall ElectriMask will certainly help you make a decision on the purchase.
If you already are a holder of Stewart Filmscreen Corp 4-Way ScreenWall ElectriMask, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stewart Filmscreen Corp 4-Way ScreenWall ElectriMask.
However, one of the most important roles played by the user manual is to help in solving problems with Stewart Filmscreen Corp 4-Way ScreenWall ElectriMask. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stewart Filmscreen Corp 4-Way ScreenWall ElectriMask along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
