Instruction/ maintenance manual of the product 1189 Stearns
Go to page of 20
DO NOT REMOVE PRIOR T O SALE! OWNER’S MANUAL I. APPROV AL CONDITIONS and CARRIAGE REQUIREMENTS Inflatable PFD Model No. 1 189 is approved by the U.S.
MECHANISM P ARTS LIST SPECIFICA TIONS Chest Size: 30 - 52 inches (76 - 132 cm) Weight Range: More than 90 pounds (41 kg) Minimum Height: For harness model 1 193 only - 5 feet 5 inches (165cm) Age Range: 16 years of age and older Buoyancy (minimum): 33.
HARNESS USE INSTRUCTIONS F AILURE TO FOLLOW THESE INSTRUCTIONS COULD RESUL T IN INJUR Y OR DEA TH. • ALERT ! Under no circumstances should the sailing harness be used in any climbing task or related activity . Failure to comply with this restriction in use may result in death or injury .
ADDITIONAL HARNESS INFORMA TION • This harness was designed and tested to meet the requirements for OFFSHORE RACING COUNCIL (ORC) requirements for Sailing Harnesses.
READ BELOW FOR MORE DET AILED INFORMA TION! 1. Inspecting Y our PFD For Damage Make sure that the PFD is free from rips, tears or punctures. This type of damage on the outside covering indicates that the Inflatable Chamber may have been exposed to potentially damaging elements.
6 DONNING INSTRUCTIONS STEP 1 Wear like a jacket, inserting arms between straps and fabric. STEP 2 Close front buckle. Manual pull lanyard should be visible on your lower right side. STEP 3 Adjust belt through slide located on right side until a comfortably snug fit is obtained.
7 INFLA TION INSTRUCTIONS See Pages 12 -14 for additional information on testing and inflating your PFD. 1. Manual Inflation - T o inflate, grasp the Jerk to Inflate tab and pull sharply downward. 2. Oral Inflation - The Oral Tube is located on the wearer's left side.
8 DEFLA TION INSTRUCTIONS Depress Oral V alve (located inside end of Oral T ube ) using either the protective cap or tab provided by inserting into the end of Oral Tube , see drawing. Gently compress air out of the inflatable chamber while depressing the Oral V alve.
FREEZING TEMPERA TURES Never use in below freezing temperatures, unless worn partially inflated. At or below 40° F (4° C) inflation time with CO2 gas will be longer . Wearing a partially inflated PFD in these conditions will provide some initial buoyancy while the PFD fully inflates.
10 V . CARE AND MAINTENANCE INSTRUCTIONS GENERAL PRODUCT LIFE EXPECT ANCY The reliability and service life of this PFD depends greatly upon how it is used and cared for . Avoid storing PFD in direct sunlight. Sunlight contains ultraviolet radiation that weakens synthetic materials.
11 REARMING KIT(S) Use Rearming Kit No. 0932. See Rearming Instructions on back cover . CARE AND CLEANING INSTRUCTIONS Drying - If the device is wet, place on a coat hanger to allow thorough drying. Do not place in direct sunlight to dry . Do not use any heat source or place on radiator .
VI. WHY ARE PFDS REQUIRED SAFETY EQUIPMENT? Drownings are the leading cause of fatalities involving recreational boating. A PFD provides flotation to help keep your head above water , help you to stay face up in the water , and increase your chances for survival and rescue.
13 HOW DO YOU TEST YOUR PFD USING THE MANUAL INFLA T OR? 1. T o test your inflatable PFD, you will need: • Y our fully armed PFD , and • Rearming kit approved for your PFD. 2. Put on the PFD. 3. Actuate the inflation system by jerking firmly downward on the pull tab.
HOW DO YOU TEST YOUR PFD USING THE ORAL INFLA T OR? 1. T o test your inflatable PFD, you will not need any spare parts or rearming kits. 2. Remove the CO2 cylinder to prevent inadvertent activation of the inflation system, which could potentially damage the PFD.
15 VIII. WEAR YOUR PFD In approximately 80 percent of all boating fatalities, the victims were not wearing a PFD. Most fatal accidents happen on calm sunny days. This inflatable PFD is much more comfortable to wear than other PFD types. Get into the habit of wearing this PFD.
16 Some Points to Remember About Hypothermia Protection: 1. Always wear your PFD. Even if you become incapacitated due to hypothermia, the PFD will keep you afloat and greatly improve your chances of rescue. 2. Do not attempt to swim unless it is to reach a nearby craft, fellow survivor , or a floating object on which you can lean or climb.
17 X. EACH OF THESE DEVICES IS INTENDED T O HELP YOU SA VE YOUR OWN LIFE For your PFD to function properly follow these suggestions to verify that it fits, floats, and remains in good condition. 1. Check the status of the inflator and make sure that the status indicator is green.
18 DO NOT A TT ACH PFD'S T O YOUR BOA T Each PFD has straps, hooks, buckles, or other means for securing the device in place on the wearer . Some PFDs also incorporate decorative dee rings or tabs. Such items are not to be used to attach the device to the boat.
19 REP ACKING INSTRUCTIONS Always deflate the PFD and rearm the Inflation Mechanism - follow REARMING Instructions prior to REP ACKING! 1. Lay device out flat with the yellow inflatable chamber up. Fold right inside edge over as shown, exposing V elcro® strip.
20 (printer id).
An important point after buying a device Stearns 1189 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stearns 1189 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stearns 1189 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stearns 1189 you will learn all the available features of the product, as well as information on its operation. The information that you get Stearns 1189 will certainly help you make a decision on the purchase.
If you already are a holder of Stearns 1189, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stearns 1189.
However, one of the most important roles played by the user manual is to help in solving problems with Stearns 1189. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stearns 1189 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
