Instruction/ maintenance manual of the product S352BMU3N StarTech.com
Go to page of 77
Manual Revision: 07/04/2014 For the most up-to-date information, please visit: www.startech.com DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr .startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.
Instruction Manual FCC C ompliance Statement This equipment has been tested and f ound to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules . These limits are desig ned to provide reasonable protection against harmful interference in a residential installation.
Instruction Manual i T able of C ontents Product Diagram .................................................................................... 1 Fr ont View ...............................................................................................
Instruction Manual ii Restore Default settings to your NAS Enclosure (Reset) ............................................................. 51 Enable or Disable SMB Service ...............................................................................
Instruction Manual 1 P roduc t Diag ram Fr ont View Rear View Fr ont Panel Drive Activity LEDs Pow er Button LAN Port Pow er Jack Reset Button RAID switch USB 3.
Instruction Manual 2 Introduction Packaging C ontents • NAS HDD RAID Enclosure • Ethernet Cable • 1M USB 3.0 A to B Cable • Universal P ower Adapter w/ regional cables (NA/UK/EU) • Rubber foot set • Instruction Manual Recommended Sy stem Requirements • 2X 3.
Instruction Manual 3 1. Using a Phillips head screw driv er (not included) remove the screw from the bottom of the enclosure. 2. Slide the “front panel” upward tow ard the top of the enclosure.
Instruction Manual 4 3. Lift the panel o to reveal the drive ba ys..
Instruction Manual 5 4. Slide each of your hard driv es into the bay..
Instruction Manual 6 5. Place the fron t panel back on by placing it over the drive bay , and sliding it into place. 6. Replace the screw using the Phillips head scr ew driver .
Instruction Manual 7 Step 2. Set your RAID C onguration W ARNING! In order to prepare your driv es for RAID and Network operation, this enclosure will congure newly installed drives in to an acceptable format (exF A T ). Please be aware that an y data currently on the drives may be lost during this process .
Instruction Manual 8 Av ailable R AID C ongurations The NAS enclosure supports 4 dierent RAID congurations . RAID is a storage technology that combines multiple hard drives in to a single unit for secure data redundancy, incr eased volume size and/or improved performance.
Instruction Manual 9 Method 2: Connect the NAS enclosure directly to your comput er (Standard Access) 1. Connect an Ethernet cable (included) from the LAN port on the enclosure to an available LAN port on your computer . 2. Set your computer IP address to an IP addr ess on the same subnet as the NAS Enclosure.
Instruction Manual 10 Note: The administration account user name and password can be changed , and additional accounts can be added (See: P age 64 <Manage Accounts>). 3. Y ou have now accessed the Web Interface Home page, as the “5 option ” web GUI menu is displayed.
Instruction Manual 11 Y ou can also click Cancel if you wish to complete additional congura tion steps before f ormatting the hard drive. W ARNING! Any data on the driv es will be deleted upon format. Step 5. Use your NAS Y our NAS is now ready for operation.
Instruction Manual 12 2. Select Map net w ork drive. 3. In the folder box, type the network path to the NAS Enclosure . Note: The default network path for the NAS Enclosur e is: http://192.
Instruction Manual 13 4. Enter the Username and password f or an active account on the NAS enclosure, and click the OK button. 5. The NAS has now been mapped as a network drive. In the future when y ou want to access the NAS it will be available as a listed driv e in my Computer .
Instruction Manual 14 2. Click the Conguration Icon, the main settings status windo w is displayed. 3. Fr om the main menu on the lef t hand side , selec t User Set, and select Ac count.
Instruction Manual 15 4. The account page is display ed, select the New button from the account list. 5. Enter your desired name and passw ord in the specied elds.
Instruction Manual 16 8. The account has now been cr eated, and is listed in the account List bo x below. Note: A new folder for specic user c ontent is also created with each account and listed under folder list.
Instruction Manual 17 3. Click Network, in the Main Menu on the lef t hand side , nex t click IP Settings. 4. The IP Settings window is now displayed . By Default the I nt ernet Protocol Information is set to Automatic IP . T o set a static IP address, place a bullet in Static IP as below .
Instruction Manual 18 5. Click the Apply button to set your changes . Note: F or detailed information regarding the best conguration for your network, please contact your network administrator .
Instruction Manual 19 Note: Some les are playable from the F ile and Folder mode of the web page but for more contr ol we recommend the Audio and Video playback modes. Upload les to your NAS Y ou can upload les to your NAS using any web bro wser .
Instruction Manual 20 2. A list of all supported music les that are available to the user will be displayed in the menu on the left hand side. Note: Supported audio playback le formats: mpeg /mp3, mp4/m4a, ogg, and wa v. Y our web browser can limit support for audio playback le formats .
Instruction Manual 21 Play video les directly in your w eb browser , with the web based media player Y ou can play video les saved on your NAS through an y HTML 5 web browser , using the web based media player . 1. Fr om the 5 option GUI menu, click the V ideo Icon.
Instruction Manual 22 4. (optional) T o stop and start playing the video le, use the play/pause button located at the bottom of the window . Note: An HTML 5 brow ser is required for video playback. Y ou may be prompted to install a plugin in order to play and manage the audio pla yback .
Instruction Manual 23 3. Double click the le of your choice to view the image le. Mobile App Access The NAS Enclosure is compatible with most WebDA V mobile applications available on iSO , Android, and Blackberr y . T hrough W ebDA V you can access les and f olders using the application on your smartphone or tablet.
Instruction Manual 24 Advanc ed NAS Operation Fr om the conguration page you can access advanced congura tions and func tions . Access C onguration Page 1. Access the Web Interface Home P age. (See: W eb Interface Access) 2. Fr om the “5 option” menu selec t the Congur ation Icon.
Instruction Manual 25 View and edit S ystem and Network Information listed in the status menu View or change S ystem Information: 1. Access C onguration Page. (See: Acc ess conguration page) Note: If you have na vigated to a dierent page, than the home page select the Status menu from the left hand menu.
Instruction Manual 26 Click the change button to alter the Network device name, and Work Group . Enter your desired Host Name and Gr oup Name then click the OK button.
Instruction Manual 27 If you have selected Automatic: If you would prefer t o use one of our three pre-set SNTP ser vers, use the dr op down menu to select your desired server (clock.
Instruction Manual 28 View Network Inf ormation: 1. Access C onguration Page. (See: Acc ess conguration page) Note: If you have na vigated to a dierent page than the home page, select the Status menu from the left hand menu.
Instruction Manual 29 Vie w PPPoE IP Addr ess or Connect to PPP oE Internet Ser vice Displays the IP address that the NAS enclosur e is connected to if the NAS has been congured for PPP oE Internet access. (See: Network PPPoE f or details regarding PPPoE Internet conguration.
Instruction Manual 30 3. The Service Information window is now displayed. Through Ser vice Information you can place a bullet in Enable or Disable depending on your pr eference for each service.
Instruction Manual 31 View the curr ent Disk Status 1. Access C onguration Page. (See: Acc ess conguration page) 2. Click Status, in the Main Menu on the left hand side, next click Disk Status. 3. The Disk Status window is now displa yed. Through the disk status menu you can view information about the hard drives and RAID array .
Instruction Manual 32 Disk Name Lists the drive and RAID Conguration enabled. Disk Capacity Displays current inf ormation regarding available storage space on y our drive/RAID array . A description of each eld is listed below . Free Spac e Displays available stor age capacit y in Gigab ytes.
Instruction Manual 33 2. Click Network, in the Main Menu on the lef t hand side , nex t click IP Settings. 3. The IP Settings window is now displayed . Thr ough the IP Settings you can view your IP settings, or choose between automatically or manually setting sta tic Internet P rotocol address Information.
Instruction Manual 34 If you have selected Static IP as below: Enter your desired IP inf ormation in each specied eld and click Apply. Note: F or detailed information regarding the best conguration f or your network, please contact your network administrator .
Instruction Manual 35 2. Click Network, in the Main Menu on the lef t hand side , nex t click PPP oE. 3. The PPPoE windo w is now displayed. Through the PPP oE window you can connect your enclosure directly to the Internet via a PPP oE (Point-to-Poin t Protocol over Ethernet) Internet Ser vice P rovider .
Instruction Manual 36 Enable and Congure DDNS With DDNS you can assign an Internet Domain Name using a DDNS service for external access to your enclosur e over the Internet. 1. Access C onguration Page. (See: Acc ess conguration page) 2. Click Network, in the Main Menu on the lef t hand side , nex t click DDNS.
Instruction Manual 37 3. The DDNS window is now display ed. 4. Select Enable from the bullet menu. If you are using a generic Dynamic DNS service, select D yn from the service provider drop down menu. Or if y ou are using No-IP as your ser vice pro vider selec t NO-IP from the DDNS service provider drop down menu.
Instruction Manual 38 Note: It may take up to an hour for the DDNS server to refresh and dir ec t t o the Enclosure. F or further assistance please contact your DDNS ser vice pr ovider. Enable and Congure Network Service P or ts 1. Access C onguration Page.
Instruction Manual 39 UPnP Port Mapping (Universal plug and play) Enables the enclosure to automatically nd and communica te with your router and open any ports required to access the NAS o ver the internet. T his is not recommended for most users unless you intend t o access the NAS remotely .
Instruction Manual 40 W ebDA V URL: Displays URL used to access the WebDA V locally. FTP Listen Port: Displays and enables the user to alt er the access por t used f or the FTP service to communicate. FTP URL: Displays URL used to access the FTP Service page locally .
Instruction Manual 41 3. The Disk Management window is now display ed. From the Disk Management Window you can set a sleep timer , format your drive or RAID array , and view S.M.A.R.T (Self-Monitoring, Analysis and Reporting T echnology) data for each of the attached drives.
Instruction Manual 42 Y ou will receive a message alerting you that the format was successful , click the Ok Button. The Disk is now formatted . S.M.A.
Instruction Manual 43 Manage your RAID Congura tion 1. Access C onguration Page. (See: Acc ess conguration page) 2. Click System Manage, in the Main Menu on the left hand side, next click RAID . 4. The RAID window is now display ed. From the RAID Window you can view your installed drive information and RAID status.
Instruction Manual 44 RAID Mode The drop down menu show s the current RAID conguration. T o delete the current RAID conguration click the delete button. W ARNING! All drive data will be lost upon deleting the RAID array . A message will appear warning that all written data will be lost.
Instruction Manual 45 A message will appear warning that all written data will be lost. Click the OK button if you wish to continue. Upon creation of the new RAID array the S.M.A.R.T table for a vailable drives will be displayed. RAID Status Displays the current RAID array and the S.
Instruction Manual 46 Update y our NAS Enclosure Firm ware Update 1. Access C onguration Page. (See: Acc ess conguration page) 2. Click System Manage, in the Main Menu on the left hand side, next click Firm ware Update. 3. The Firm ware Update window is now display ed.
Instruction Manual 47 W ARNING! It is not recommended that a rmware upgrade be a ttempted unless specically stated on the StarT ech.com website , or directed by a StarT ech.com T echnical advisor. W ARNING! It is recommended that all drive DA T A be backed up prior to attempting a rmwar e upgrade.
Instruction Manual 48 Reboot Y our NAS Enclosure remotely using the W eb Inter face 1. Access C onguration Page. (See: Acc ess conguration page) 2. Click System Manage, in the Main Menu on the left hand side, next click Reboot. 3. The Reboot window is now displa yed.
Instruction Manual 49 4. T o reboot the enclosure click the Reboot button. Y ou will receive a message alerting you that all open connections will be reset, click the OK button if you would like to c ontinue. 5. The enclosure will reboot. Note: It may take several seconds f or the system to fully reboot.
Instruction Manual 50 2. Click System Manage, in the Main Menu on the left hand side, next click Shut Down. 3. The Shutdown window is no w displayed. Fr om the shutdown W indow you can remotely shutdown the NAS Enclosur e through the web interface. 4.
Instruction Manual 51 Restore Default settings to y our NAS Enclosure (Reset) 1. Access C onguration Page. (See: Acc ess conguration page) 2. Click System Manage, in the Main Menu on the left hand side, next click Default. 3. The Default window is now display ed.
Instruction Manual 52 W ARNING! It is recommended that all drive DA T A be backed up prior to Resetting the NAS Enclosure. L ost drive data is not the responsibility of StarT ech.
Instruction Manual 53 Enable or Disable SMB Ser vice 1. Access C onguration Page. (See: Acc ess conguration page) 2. Click App Server , in the Main M enu on the left hand side, next click SMB Server .
Instruction Manual 54 Fr om the SMB Status section you can enable or disable SMB ser vice . Depending on your prefer ence place a bullet in Enable or Disable. Enable or Disable W ebDA V Ser vice 1. Access C onguration Page. (See: Acc ess conguration page) 2.
Instruction Manual 55 3. The WebDA V Ser ver windo w is now displayed. F rom the W ebDA V W indow you can enable or disable the ability for your local computer , tablet, iPhone or smartphone to access les and play media stor ed on your NAS Enclosure using third party WebD A V le management apps.
Instruction Manual 56 Enable or Disable FTP Ser vice 1. Access C onguration Page. (See: Acc ess conguration page) 2. Click App Server , in the Main M enu on the left hand side, next click FTP Server .
Instruction Manual 57 Fr om the FTP Status select you can enable or disable FTP ser vice . Depending on your prefer ence place a bullet in Enable or Disable. Download and host T orrent F iles 1. Access C onguration Page. (See: Acc ess conguration page) 2.
Instruction Manual 58 3. The BT Download window now displa yed. Fr om the BT Download W indow you can download and host T orrent les to and from external sources o ver the Internet.
Instruction Manual 59 The Download Queue shows the status of curren tly hosted and downloading les. Note: Once you hav e added the torrent le you will host the downloaded portion of the torrent le until it is remo ved from your Downloaded Queue.
Instruction Manual 60 Settings Opens the BT Option menu. The BT option menu enables you to set the f ollowing congurations using the value boxes list ed: Note: entering a value of 0 will allocate the maximum amount a vailable resources for each eld.
Instruction Manual 61 Mail Notication Enables you to receiv er an aler t message via e-mail for each torrent le that has completed downloading T o ac tivat e e -mail notication, place a check in the Enable bo x. If your e-mail ser ver requir es authentication please place a check in the Authentication box as well .
Instruction Manual 62 Assign F older for UPNP A V/DNLA Ser vice and iT unes Playlists 1. Access C onguration Page. (See: Acc ess conguration page) 2. Click App Server , in the Main M enu on the left hand side, next click Media Server . 3. The Media Server window now displayed.
Instruction Manual 63 Select the drop down menu next to the specic media type that you would like to share using DNLA and UPnP A V . Fr om within the drop down menu, select the specic folder you would like pull the selected media type from. T o build a iTunes playlist f orm the music folder , click the build button to create the playlist.
Instruction Manual 64 Manage Acc ounts 1. Access C onguration Page. (See: Acc ess conguration page) 2. Click User Set, in the Main Menu on the left hand side, next click Account. 3. The Account windo w is now displayed. F rom the Account window you can cr eate, modify , limit, disable or delete specic user accounts.
Instruction Manual 65 Create an A ccount 1. Click the New button. Enter your desired username and passw ord in the specied elds. 2. Next specify whether you would like the accoun t to be Read only (can only access les), or Read/Write ( Can access save and edit les) by placing a bullet in your preferenc e.
Instruction Manual 66 3. The account has now been cr eated is listed in the account List box below . Note: A new folder f or specic user content is also created with each account and listed under folder list. Change Acc ount Settings 1. Select the account from the account bo x, and click the modify button.
Instruction Manual 67 Enable an account 1. Select the account from the account bo x, and click the Enable Button. Note: Enable/Disable button is displayed based on ac count status. 2. The account has now been enabled . Delete an Acc ount 1. Select the account from the account bo x, and click the Delete Button.
Instruction Manual 68 2. Select the folder from the F older List box, and click the Right pointing Arrow button (Green) located between the F older List box and the Sharing List box. 3. The user account has now been granted ac cess to the specied folder .
Instruction Manual 69 Accoun t Folder Management Create a New F older 1. T o create a new folder , click the Create button located in the F older List box 2. Enter your pref erred folder name in the text box, and click the OK Button. 3. The folder has now been created and is listed in the F older List box.
Instruction Manual 70 2. Enter your pref erred new name in the New Name Box and Click OK. 3. The Folder name has now been changed . Delete a F older W ARNING! Any Data within the f older will be deleted. 1. Select the folder from the F older List box, and click the Delete button.
Instruction Manual 71 Quick Setup Guide (Optional) 1. Access C onguration Page. (See: Acc ess conguration page) 2. Click User Set, in the Main Menu on the left hand side, next click Set Guide. 3. The ½ Web Language Settings window is now displa yed.
Instruction Manual 72 T echnical Suppor t StarT ech.com’ s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your pr oduc t, visit ww w .star tech.c om/suppor t and access our compr ehensive selection of online tools, documentation, and downloads.
Hard-to-nd made easy . At StarT ech.com, that isn ’t a slogan. It ’ s a promise. StarT ech.com is your one-stop source for every connectivity par t you need. F rom the latest technology to legacy products — and all the parts that bridge the old and new — we can help you nd the parts that connect your solutions.
An important point after buying a device StarTech.com S352BMU3N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought StarTech.com S352BMU3N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data StarTech.com S352BMU3N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, StarTech.com S352BMU3N you will learn all the available features of the product, as well as information on its operation. The information that you get StarTech.com S352BMU3N will certainly help you make a decision on the purchase.
If you already are a holder of StarTech.com S352BMU3N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime StarTech.com S352BMU3N.
However, one of the most important roles played by the user manual is to help in solving problems with StarTech.com S352BMU3N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device StarTech.com S352BMU3N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
