Instruction/ maintenance manual of the product ES-200-77 StarTech.com
Go to page of 19
ES-200-77 Multimedia Pentium III processor-bas ed computer for HMI Applications User's Manual.
Copyright Notice Advantech Co., Ltd copyrights this document. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvement s to the products described in this manual at any time. S pecifications are thus subject to change without notice.
Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User’s Manual for later reference. 3. Disconnect this equipmen t from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergent s for cleaning.
Packing List Before installing your equipment, make sure that the following materials have been received: • ES-200-77 • Accessory box, including: - CD kit for ES-200 Driver - 2-wire Power cord for 1.8 Meters - 30cm COM port cable - 30cm VGA cable - 30cm power cable for ES-3115/ES-3112/ES-3117 DC output - Wall mount bracket * 2 pcs.
Contents Chapter 1 Introduction ................ .............. ................ ............. ............ ...... ....1 1.1 Introdu ction .............................................................................................2 1.2 How to us e this menu .
Cha p ter 1 General In format ion Thi s c ha p ter g ives inform ation on ES - 200-77 Sections • • How to Use • •.
1.1 General Information The ES-200-77 PC is a multimedia Pentium III proc essor-based computer that is designed t o serve as a human machine interface (HMI) and as a desktop computer.
1.3 Specifications Feature: ● Fits with Advantech SBC boards. ● Buit-in 180-watt power supply . ● One PC-104 card or one half-length PCI card extendible ● T wo 3.
PC104 card expansion. ● I/O port: - 1* VGA port - 1* Parallel port - 4 * serial ports: RS-232 3, RS-232/422/485*1 - 2 * USB ports: Support USB1.1 up to 20Mb/sec.
.
.
Chapter 2 System Setup Sections include: • A Quick Tour of the Panel PC • Preparing for initial Use • Installation Procedures • Installing the Drivers.
2.1 Quick T our for ES-200-77 Before you start to set up ES-200, please take a moment to be familiar with the locations and purposes of the controls, drives, conne ctors and ports, which are illustrated in the figures below. When you place the panel PC upright on the desktop, its front panel appe ars as shown in Figure 2-1.
2.3.2 Connecting the keyboard and m ouse Connect the PS/2 mouse and keyboard port on the I/O se ction of the panel PC. 2.3.3 Connecting the display Connect the display to the VGA sub in the bottom of ES-200-77 2.3.4 Switch on the po wer Switch on the power switch on the rear cover.
drive. 2.6 Inst alling the drivers After installing your system software, you w ill be able to set up the Ethernet , VGA, audio, PCMCIA and touchscreen functio ns. All the driver s except the CD-ROM drive driver are stored in a CD-ROM disc entitled "Drivers and Utilities.
Chapter 3 Using the Panel PC This chapter details installi ng ES-200 hardware. Sections include: • CD-ROM Drive • PS/2 Mouse and Keyboard • PCI/ISA Bus Expansion • Parallel Port • Serial COM.
3.1 CD-ROM drive To insert a CD-ROM disc, press the eje ct button of the CD-ROM drive. The yellow activity light will flash and the front panel will come o ut a shor t distance. Using your fingertips, hold the top and bottom of the front panel and pull it outwa rd to the very end.
PC, and then turn on the panel PC. 5. If necessary, run the panel PC's BIOS set up program to configure the parallel po rt to respond as required by your prin ter and software operating environment. 3.5 Serial COM port s There are three serial COM ports on the bottom of the rear cov er.
Line out: Output audio to external devices such as sp eakers or earphones. Line in: Input audio from an external CD player or radio. 1. Connect the audio device to the system.
An important point after buying a device StarTech.com ES-200-77 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought StarTech.com ES-200-77 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data StarTech.com ES-200-77 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, StarTech.com ES-200-77 you will learn all the available features of the product, as well as information on its operation. The information that you get StarTech.com ES-200-77 will certainly help you make a decision on the purchase.
If you already are a holder of StarTech.com ES-200-77, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime StarTech.com ES-200-77.
However, one of the most important roles played by the user manual is to help in solving problems with StarTech.com ES-200-77. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device StarTech.com ES-200-77 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
