Instruction/ maintenance manual of the product ARMPIVOTE StarTech.com
Go to page of 15
Manual Revision: 06/19/2014 For the most up-to-date information, please visit: www.startech.com ARMPIVOTE *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr .startech.com ES: Guía del usuario - es.
Instruction Manual FCC C ompliance Statement This equipment has been tested and f ound to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules . These limits are desig ned to provide reasonable protection against harmful interference in a residential installation.
Instruction Manual i T able of C ontents Introduction ............................................................................................ ii Packaging Conten ts .................................................................................
Instruction Manual ii Introduction Packaging C ontents 13 Plastic Gasket Cushion Qty .2.
Instruction Manual 1 P roduc t Diag ram.
Instruction Manual 2 Installation Desk / Grommet Mounting The Monitor Arm can be clamped to a desk / table, or mount ed through a grommet hole. Instructions for both will be provided in the steps below .
Instruction Manual 3 2. Desk Clamp: Attach the bottom portion of the Clamp (4) to the L Plate, then plac e the Clamp (4) opening around the edge of your desktop in y our desired location and tighten by hand to secure . Ensure that the Clamp is making full contact with the desk surface.
Instruction Manual 4 Attaching the Display 1. Carefully place your displa y face down on a protective surface to access the mounting points. 2. Depending on the depth of the mounting holes on your display , attach the display to the Gas Spring Arm (1) using either the M4x12mm (11) screws, or the M4x25mm (12) screws with spacers (10).
Instruction Manual 5 Attaching the Gas Spring Arm Assembly 1. Slide the Extension Arm (2) down onto the P ole (3) . 2. Slide the Gas Spring Arm (1) onto the Extension Arm (2). 3. Place the Cov er and Bolt (9) ont o the Gas Spr ing Arm (1) and press the bolt do wn to secure the two arms together .
Instruction Manual 6 Note: When attaching cables and routing thr ough the cable management channels, ensure that you leav e enough slack to avoid stretching / pulling out the cables when moving the arm.
Instruction Manual 7 4. Use the Cable Clip (7) to secure the displa y cables to the pole. W ARNING! For ced movement of the L CD Arms or Mount Brackets without loosening the screws may damage the pr oduc t or the mounted displa ys.
Instruction Manual 8 T o increase / decrease the tilt resistance, adjust the set scr ew located on the side of the Mount Bracket joint, using the 6mm Allen Wrench (6). T o increase / decrease the Gas Spring Arm resistance, adjust the set screw located a t the elbow of the articulating arm, using the 4mm Allen W rench (5).
Instruction Manual 9 Specications W eight Capacity 11 lbs (5 kg) Max Display Size 24” VESA Compatibility 75 x 75 mm and 100 x 100 mm Maximum Extension 22.
Instruction Manual 10 T echnical Suppor t StarT ech.com’ s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your pr oduc t, visit ww w .star tech.c om/suppor t and access our compr ehensive selection of online tools, documentation, and downloads.
Hard-to-nd made easy . At StarT ech.com, that isn ’t a slogan. It ’ s a promise. StarT ech.com is your one-stop source for every connectivity par t you need. F rom the latest technology to legacy products — and all the parts that bridge the old and new — we can help you nd the parts that connect your solutions.
An important point after buying a device StarTech.com ARMPIVOTE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought StarTech.com ARMPIVOTE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data StarTech.com ARMPIVOTE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, StarTech.com ARMPIVOTE you will learn all the available features of the product, as well as information on its operation. The information that you get StarTech.com ARMPIVOTE will certainly help you make a decision on the purchase.
If you already are a holder of StarTech.com ARMPIVOTE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime StarTech.com ARMPIVOTE.
However, one of the most important roles played by the user manual is to help in solving problems with StarTech.com ARMPIVOTE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device StarTech.com ARMPIVOTE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
