Instruction/ maintenance manual of the product ARMDUAL StarTech.com
Go to page of 19
Manual Revision: 06/16/2014 For the most up-to-date information, please visit: www.startech.com ARMDU AL Desk Mount Ar ticulating Dual Monitor Arm with Cable Management & Height A djust *actual product may vary from photos DE: Bedienungsanleitung - de.
Instruction Manual FCC C ompliance Statemen t This equipment has been tested and f ound to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules . These limits ar e designed to provide reasonable protection against harmful interference in a residential installation.
Instruction Manual i T able of C ontents Introduction ............................................................................................ 1 Packaging Conten ts ..................................................................................
Instruction Manual 1 Introduction Packaging C ontents.
Instruction Manual 1 P roduct Diagram.
Instruction Manual 2 Installation W ARNING! It is the installer ’ s responsibility to ensure that the combined w eight of all components does not exc eed the maximum weight capacity 13.
Instruction Manual 3 3. Using the 4 hex screw s removed in Step 2, install the Grommet Pla te (7) to the base of the pole. 4. Remove the screw and 2 w ashers shown using a Phillips screwdriver to disconnect the threaded shaft from the base of the clamp, then slide the plat e back onto the shaft.
Instruction Manual 4 Desk / Grommet Mounting 1. Adjust the height of the Desk Clamp (3) to t y our desk sur face (if applicable). 2. Place the 4 Plastic Gasket Cushions (13) as sho wn.
Instruction Manual 5 3. Desk Clamp: Place the Desk Clamp (3) opening around the edge of y our desktop in your desired location and tigh ten by hand to secure. Ensure tha t the Desk Clamp is making full contact with the desk sur face. 4. Loosen the collar on the support post and adjust to the desired height.
Instruction Manual 6 5. Slide the DEK (12) onto the support post so that it rests on the collar . Once adjusted to the desired height, tight en into place using the 2.5mm Allen Wrench (10). Attaching the Display s 1. Car efully place your display face down on a protective surface to access the mounting points.
Instruction Manual 7 3. Using a Phillips screw driver , tighten the screws until the bracket is rmly attached to the back of the display . W ARNING! Do not over-tighten the scr ews and stop immediately if you encounter resistance to av oid damage to your display .
Instruction Manual 8 Attaching the L CD Arm Assembly 2. Tighten the set scr ew using the 2.5mm Allen W rench ( 10 ). 1. Slide the L CD Arm Assembly ( 1 or 2 ) down onto the DEK ( 12 ).
Instruction Manual 9 3. Place the Co ver (11) over the mounting post and insert 1 x M6x12mm Phillips Screw (16) with 1 x Plastic Washer (15) . Tighten using a Phillips screwdriver .
Instruction Manual 10 Cable Management Note: When attaching cables and routing thr ough the cable management channels, ensure that you leav e enough slack to avoid stretching / pulling out the cables when moving the arm.
Instruction Manual 11 Adjusting L CD Arm Resistance W ARNING! For ced movement of the L CD Arms or Mount Brackets without loosening the screws may damage the pr oduc t or the mounted displays . Always support your display from underneath when making any adjustments to the L CD Arms or Mount Brackets to avoid damage to the display .
Instruction Manual 12 T o increase / decrease the pan / swing resistance, adjust the set scr ew located on the top of the Mount Bracket joint, using the 4mm Allen Wrench (9). T o increase / decrease the swivel resistance on either of the elbow join ts of the articulating LCD Arms, adjust the set scr ews indicated below , using the 2.
Instruction Manual 13 Specications W eight Capacity 30 lbs (13.6 kg) Max Display Size 24” VESA Compatibility 75x75 mm and 100x100 mm Maximum Extension 18.
Instruction Manual 14 T echnical Suppor t StarT ech.com ’ s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your pr oduct, visit ww w .startech.com/suppor t and access our comprehensive selection of online tools , documentation, and downloads.
Hard-to-nd made easy . At StarT ech.com, that isn’t a slogan. It’ s a promise. StarT ech.com is your one-stop source for every connectivity par t you need. Fr om the latest technology to legacy products — and all the parts that bridge the old and new — we can help you nd the parts that connect your solutions.
An important point after buying a device StarTech.com ARMDUAL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought StarTech.com ARMDUAL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data StarTech.com ARMDUAL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, StarTech.com ARMDUAL you will learn all the available features of the product, as well as information on its operation. The information that you get StarTech.com ARMDUAL will certainly help you make a decision on the purchase.
If you already are a holder of StarTech.com ARMDUAL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime StarTech.com ARMDUAL.
However, one of the most important roles played by the user manual is to help in solving problems with StarTech.com ARMDUAL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device StarTech.com ARMDUAL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
