Instruction/ maintenance manual of the product TSP700 Star
Go to page of 2
Attaching the TSP700 vertical stand 1. Unpacking : Confirm that all accessories are included. 2. Attachment procedur es : Note: Ensure that power that is supplied to the printer and that all devices connected to the printer have been switched OFF and that the cables have been unplugged before starting the modification.
Remove the screws 2-4. Attaching the brand seal Place the brand seal that was supplied over the existing brand seal. (The characters on the operation panel will be inverted when the printer is attached to a wall or onto a stand.) 2-5. Attaching the holder plate 1 Remove the two screws from the printer as shown in the illustration.
An important point after buying a device Star TSP700 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Star TSP700 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Star TSP700 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Star TSP700 you will learn all the available features of the product, as well as information on its operation. The information that you get Star TSP700 will certainly help you make a decision on the purchase.
If you already are a holder of Star TSP700, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Star TSP700.
However, one of the most important roles played by the user manual is to help in solving problems with Star TSP700. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Star TSP700 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
