Instruction/ maintenance manual of the product SF-10DJ Star Micronics
Go to page of 16
Automatic Sheet Feeder USERS MANUAL.
TABLE OF CONTENTS CHAPTER 1 INSTALLATION Unpacking Mounting the Automatic Sheet Feeder CHAPTER 2 OPERATION Loading the Paper Operation of Control Codes CHAPTER 3 MAINTENANCE Maintenance Malfunctions C.
Chapter 1 INSTALLATION UNPACKING Open the carton and check each item in the box against Figure l-l to make sure that you have everything (there should be Sve items). - I FfOure I-1. Check to make sure You have all five items: 1) Sheet feeder, 2) Hopper attachment, 3) Stacker attachment, 4) Printer cover, and 5) User’s manual.
MOUNTING THE AUTOMATIC SHEET FEEDER 1. Hold the metal hopper attachment as shown in Figure l-2, and insert it firmly into the tixihg holes on the top part of the hopper suppport.
igure 1-4. Move the release lever and the bail lever to mount the Automatic Sheet Feeder. 6. Secure the mounting brackets of the Automatic Sheet Feeder onto the shaft of the platen by lowering it into position as shown in Figure l-5. igure 1-5. Mount the Automatic Sheet Feeder onto the printer.
ection roller I Figure 1-B. Confirm that the Automatic Sheet Feeder is set correctly. 8. Install the printer cover provided with the Automatic Sheet Feeder. Notes: 1. Please keep the original printer cover in a safe place. 2. To remove the Automatic Sheet Feeder, carry out the above in- stallation procedures in reverse.
C hapter 2 OPERATION LOADING THE PAPER 1. Pull the paper loading lever forward to bring the pressure plate back into position with a clicking sound as shown in Figure 2-l. I Figure 2-1. Pull the paper loading lever forward. 2. Align the left paper guide position with the triangle seal on the side of the stacker.
Figure 2-2. Fan the paper before loading. 4. Load the paper, aligning it with the left side hopper, then sliding the right hopper into position. Do not set it too tightly, so as to allow the paper to be transported smoothly between the hoppers. 5. After loading the paper into the hopper, press the paper loading lever backward.
OPERATION OF CONTROL CODES When the paper-out detector is enabled by setting the DIP switch, the following control codes will be changed as shown below: 1. < FF > (Form Feed) This command sets the paper into the printer. It ejects any paper set in the printer when the Automatic Sheet Feeder is empty.
C hapter 3 MAINTENANCE MAINTENANCE The Automatic Sheet Feeder is designed to withstand long use with high reliability. We ask users to regularly remove any dirt or dust from the Au- tomatic Sheet Feeder, first removing it from the printer. The platen of the printer mechanism and roller in particular should be kept clean.
Symptom Paper is crooked Malfunction of paper ejection Cause Remedy * Poor paper l Use new paper 0 Too much horizontal * Check position of the movement of paper so paper guide that guide rollers of the Automatic Sheet Feeder do not take up the paper correctly.
Chapter 4 SPECIFICA TIONS w Dimensions and weight Width Depth Height Weight: 340 mm (13.4 inches) 250 mm ( 9.8 inches) 320 mm (12.6 inches) 1.2 kg (2.65 pounds) n Paper type and dimensions Type Fine quality paper (slick paper) Width Length Weight Storage 182mm(7.
n Hopper capacity H Stacker capacity n Reliability Max. 50 sheets (with 64 g/m2) Max. 50 sheets (with 64 g/m2) 100,000 cycles (MCBF; Mean Cycle Before Failure) n Ambient conditions Temperature Operati.
- 12.
Consumer Response Star Micronics Co., Ltd. invites your suggestions and comments on your printer and this manual. Please address your correspondence to: Worldwide Headquarters: STAR MICRONICS CO., LTD. 194 Nakayoshida Shizuoka, JAPAN 422-91 Attn: Product Manager American Market: STAR MICRONICS AMERICA INC.
-. Printed in Japan, 80820936.
An important point after buying a device Star Micronics SF-10DJ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Star Micronics SF-10DJ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Star Micronics SF-10DJ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Star Micronics SF-10DJ you will learn all the available features of the product, as well as information on its operation. The information that you get Star Micronics SF-10DJ will certainly help you make a decision on the purchase.
If you already are a holder of Star Micronics SF-10DJ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Star Micronics SF-10DJ.
However, one of the most important roles played by the user manual is to help in solving problems with Star Micronics SF-10DJ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Star Micronics SF-10DJ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
