Instruction/ maintenance manual of the product IP-NPC Star Micronics
Go to page of 16
USER’S MANUAL Р УК ОВ О ДСТВО ПОЛЬ ЗОВА ТЕЛЯ P ARALLEL INTERF ACE UNIT МО ДУ ЛЬ ПАР АЛЛЕ ЛЬНОГО ИНТЕРФЕЙС А IP-NPC PBA10 PIF 80825930.
Notice • All rights reserved. Reproduction of any part of this manual in any form whatsoever , without ST AR’s express permission is forbidden. • The contents of this manual are subject to change without notice. • All ef forts have been made to ensure the accuracy of the contents of this manual at the time of going to press.
English CONTENTS Chapter 1: Parallel Interface Unit ........................................................... 2 Unpacking .......................................................................................... 2 Chapter 2: Installation ..........
2 Parallel Interface Unit This parallel interface unit makes it possible for your printer to communicate with your computer using parallel data. This manual describes the operational procedures for using the parallel interface unit. Unpacking • After removing the contents from the packaging, check to make sure you have all seven items.
3 English • First remove the printer cover by pushing in the tabs located on both sides of the lower rear of the printer with a screwdriver as illustrated below . • Connect the ribbon cable to the top terminal inside the printer , and carefully slide the parallel interface unit into the printer .
4 And secure interface unit in place with the two small screws. Finally , install the printer cover. Connecting a parallel cable • For connection to the parallel interface, you will probably want to use a standard parallel cable, like the one shown below .
5 English Plug one end of the parallel cable into the parallel port of your computer . The parallel port should be labeled “Printer ,” “Parallel,” “PRN,” “LPT1,” or some- thing similar. Plug the other end of the parallel cable into the socket on the back of the printer and secure it in place with the clips.
6 Connector Signals and Functions Pin Name Function 1 STROBE Goes low for ≥ 0.5 µ s when active. 2D A T A 0 3D A T A 1 4D A T A 2 5D A T A 3 6D A T A 4 7D A T A 5 8D A T A 6 9D A T A 7 10 ACK 10 µ s low to acknowledge receipt of data. 1 1 BUSY Printer sets line low when ready to receive data.
Ру сский СОДЕРЖАНИЕ Г лав а 1: М од уль пар а ллельного инт ерфейс а .......................................... 8 Распак овка ................................................................
8 Модуль параллельног о интерфейса Данный модуль пара ллельного интерфейса по зволит Вашему принтеру взаимод ейс твовать с Вашим ко мпью тером с испо льз ов анием параллельных данных.
9 Ру сский • Прежде всего снимите крышку принтера; для эт ог о нажмите о тв ер тк ой на ушки, располо женные с об.
10 Зате м з акрепите м одуль интерфейса в этом пол о жении с пом ощью дву х м алых винтов.
11 Ру сский Вст авь т е один конец параллельного каб еля в паралле льный порт Вашего ко мпьютера.
12 Сигналы и функции соединителя Контакт Название Функция 1 STR OBE Перехо д от высок ого к низко м у (в т ечении 0,5 м с) при во збужд ении.
.
ST AR MICRONICS ASIA LTD. Rm 1802-6, 18/F ., T ower 2, Enterprise Square 9 Sheung Y uet Road, Kowloon Bay Hong Kong T el: 852-2796-2727 Fax: 852-2799-9344 KEI • INTERNA TIONAL CORPORA TION Matsuya Bldg.
An important point after buying a device Star Micronics IP-NPC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Star Micronics IP-NPC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Star Micronics IP-NPC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Star Micronics IP-NPC you will learn all the available features of the product, as well as information on its operation. The information that you get Star Micronics IP-NPC will certainly help you make a decision on the purchase.
If you already are a holder of Star Micronics IP-NPC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Star Micronics IP-NPC.
However, one of the most important roles played by the user manual is to help in solving problems with Star Micronics IP-NPC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Star Micronics IP-NPC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
