Instruction/ maintenance manual of the product SMX.501 Stanton
Go to page of 12
S S M M X X . . 5 5 0 0 1 1 PROFESSIONAL DJ MIXER ST ANTON MAGNETICS, INC information@stantondj.com • 954.689.8833 www .stantondj.com OWNER’S M A N U A L.
Thank you for making Stanton your first choice in professional DJ mixers. Our innovative family of mixers has been developed with input from the profes- sional DJ community .
PLEASE READ CAREFULL Y BEFORE USE F AILURE TO FOLLOW THE INSTRUCTIONS PRINTED BELOW MA Y VOID WARRANTY • Follow all security advice printed on your mixer • When removing the unit's AC plug from the power source, grasp and pull the plug, NEVER the cord itself! • Avoid placing your mixer near heat sources, such as power amplifiers.
This hybrid 3-Channel, "T echno / Scratch" mixer will appeal to both T urntablist and Club/Rave DJs alike. Nowhere else can DJs find so many features included with the design of a battle mixer . The SMX.501 is a "one of a kind" mixer that combines the best of both worlds and bridges the gap between Battle & Club DJs.
DESCRIPTION OF FUNCTIONS.
CHANNEL STRIPS GAIN Controls the input level of each channel. An LED meter is provid- ed on each of the 3 channels. HI, MID, LOW (EQ) Individual controls for high frequency , midrange, and low fre- quency equalization with +9dB/Kill adjustments. Note: Any changes made to EQ settings will change the overall output level.
DESCRIPTION OF FUNCTIONS MASTER SECTION MASTER Controls the overall output level of the mixer . SEND RETURN Send and Return levels are used to control the volume of the external effects unit connected to the SMX.
MICROPHONE SECTION MIC 1 Controls the input level of Microphone input 1. MIC 2 Controls the input level of Microphone input 2. HI, MID, LOW (EQ) Individual controls for high frequency , midrange, and low fre- quency equalization with +9dB/Kill adjustments.
Removing a fader : 1. Make sure mixer is powered off and power supply is disconnected from back of mixer . 2 . T o remove the Protekt Panel, take off the 4 main fader knobs and then remove the 4 screws located at the corners of the panels. Lift the panel to remove.
affect the operation of the fader . Clean the slider assembly by gently wip- ing the wiper contacts and slider bearings (E) using a tissue or cot- ton bud. If slider bearings are excessively worn, as indicated by excessive slider rocking then con- tact Stanton for replacement.
Line inputs: 2 (RCA) x 3 channels, -10 dBV /10 kOhm Phono inputs: 2 (RCA) x 3 channels, -50 dBV / 47 kOhm Mic inputs: 2 (1/4") -50 dBV /100 kOhm Return inputs: 2 (1/4"), -10 dBV / 10 kOhm Se.
W ARRANTY Stanton Magnetics, Inc. – W arranty Provision – Returns for Repairs or Replacement W arranty Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’ s authorized distributors outside the U.
An important point after buying a device Stanton SMX.501 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stanton SMX.501 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stanton SMX.501 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stanton SMX.501 you will learn all the available features of the product, as well as information on its operation. The information that you get Stanton SMX.501 will certainly help you make a decision on the purchase.
If you already are a holder of Stanton SMX.501, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stanton SMX.501.
However, one of the most important roles played by the user manual is to help in solving problems with Stanton SMX.501. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stanton SMX.501 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
