Instruction/ maintenance manual of the product ESM-11 Stanton
Go to page of 4
@ ESM-11 PROFE SSIONA L ST E R EO PREAM P MIX ER OWNER ’ S MANUAL STANTON MAGNETICS, LLC 2821 Evans St. Hollywood, FL 33020 (954) 929-8999 Fax: (954) 929-0333 info@stantonmagnetics.
PL EA SE READ CAREFUL L Y BEFORE USE OF THIS PR ODUCT F A I LU R E TO F O L LO W T H E I N S T RU C TI O N S P R I N TE D B E L OW M A Y V O I D W A R R A N T Y • Follow all security advice printed .
1. Master level control: Controls the o v erall signal output level of the Master output 2. Mic volume control: Controls the o verall microphone output level 3. Microphone input: 1/4” connector 4. Input selector switches: Selects phono or line inputs of channels 1 and 2 5.
T E C H N I CA L S P E C I FI C A T I O N S Line inputs: 2 (RCA), 150 mV / 47 K ohm Phono inputs: 2 (RCA), 3 mV / 47 K ohm DJ mic input: 1 (1/4 inch), 1.5 mV / 600 ohm Master output: 1 (RCA), 1 V / 600 ohm Record output: 1 (RCA), 330 mV / 600 ohm Headphone output: 1 (1/4 inch), 32 - 200 ohms recommended F requency Response: 20 Hz - 20 kHz, +/- 0 .
An important point after buying a device Stanton ESM-11 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stanton ESM-11 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stanton ESM-11 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stanton ESM-11 you will learn all the available features of the product, as well as information on its operation. The information that you get Stanton ESM-11 will certainly help you make a decision on the purchase.
If you already are a holder of Stanton ESM-11, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stanton ESM-11.
However, one of the most important roles played by the user manual is to help in solving problems with Stanton ESM-11. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stanton ESM-11 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
