Instruction/ maintenance manual of the product PG05 Stanley Black & Decker
Go to page of 24
© 201 1 Stanley Black & Decker , Inc. New Britain, CT 06053 U.S.A. 28072 1 1/2013 V er . 6 S afety , O pera tiOn and M aintenance USer ManUaL FG10 HYDRAULIC FROG GRINDER PG05 HYDRAULIC PROFILE GR.
2 ► FG10 Service Manual DECLARA TION OF CONFORMITY DECLARATION OF CONFORMITY ÜBEREINSTIMMUNGS-ERKLARUNG DECLARATION DE CONFORMITE CEE DECLARACION DE CONFORMIDAD DICHIARAZIONE DI CONFORMITA Hydrauli.
FG10 Service Manual ◄ 3 T ABLE OF CONTENTS SERVICING THE ST ANLEY HYDRAULIC FROG GRINDER/PROFILE GRINDER. This manual contains safety , operation, and routine maintenance instructions. Stanley Hydraulic T ools recommends that servicing of hydraulic tools, other than routine maintenance, must be performed by an authorized and certied dealer .
4 ► FG10-PG05 Service Manual SAFETY SYMBOLS Always observe safety symbols. They are included for your safety and for the protection of the tool. LOCAL SAFETY REGULA TIONS Enter any local safety regulations here. Keep these instructions in an area accessible to the operator and mainte- nance personnel.
FG10-PG05 Service Manual ◄ 5 SAFETY PRECAUTIONS T ool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose. These safety precautions are given for your safety .
6 ► FG10-PG05 Service Manual T OOL STICKERS & T AGS 29715 PG05 Name T ag 28727 FG10 Name T ag 25610 Railroad Help Desk Decal SAFETY T AG P/N 15875 (Shown smaller then actual size) DANGER DANGER READ OPERA TION MANUAL AND SAFETY INSTRUCTIONS FOR THIS TOOL BEFORE USING IT .
FG10-PG05 Service Manual ◄ 7 HOSE TYPES The rated working pressure of the hydraulic hose must be equal to or higher than the relief valve setting on the hy- draulic system. There are three types of hydraulic hose that meet this requirement and are authorized for use with Stanley Hydraulic T ools.
8 ► FG10-PG05 Service Manual HOSE RECOMMENDA TIONS Oil Flow Hose Lengths Inside Diameter USE ( Press/Return) Min. Working Pressure GPM LPM FEET METERS INCH MM PSI BAR Certied Non-Conductive Hose .
FG10-PG05 Service Manual ◄ 9 HTMA / EHTMA REQUIREMENTS Flow Range Nominal Operating Pressure (at the power supply outlet) System relief valve setting (at the power supply outlet) Maximum back pressure (at tool end of the return hose) Measured at a max.
10 ► FG10/PG05 Service Manual OPERA TION 3. Using the wrench (127) provided, place it on the ats of the drive ange. Place a strap wrench on the grinding wheel and then tighten by gripping and turning the strap wrench while holding the wrench provided.
FG10/PG05 Service Manual ◄ 1 1 OPERA TION Cross Section of T ypical Rail Figure 3. Prole Grinding USING THE EXTENSION ASSEMBL Y The extension assembly (128) can be used at anytime by simply connecting it to one end of the grinder at the barrel nut (61) and clamping it in place by turning the adjustable handle (44).
12 ► FG10/PG05 Service Manual OPERA TION 6. Grind a small amount of material at a time adjust- ing the grinding wheel as necessary by turning the handwheel. Note: If the grinder is not loaded against a work sur- face when the trigger is released, the wheel will take 5-10 seconds to come to a complete stop.
FG10/PG05 Service Manual ◄ 13 T OOL PROTECTION & CARE • Make sure all couplers are wiped clean before con- nection. • The hydraulic circuit control valve must be in the “OFF” position when coupling or uncoupling hydrau- lic tools.
14 ► FG10/PG05 Service Manual TROUBLESHOOTING PROBLEM CAUSE SOLUTION Grinder does not run Hydraulic power source not functioning. Check power source for proper ow and pressure (7-10 gpm/ 26-38 lpm @ 1500-2000 psi/ 105-140 bar . Couplers or hoses blocked.
FG10/PG05 Service Manual ◄ 15 SPECIFICA TIONS Wheel Capacity ............................................................. 6 in. dia. x 3 in. thk x 5/8-1 1 threaded arbor (T ype 6) U.S.A. Pressure Range...............................................
16 ► FG10-PG05 Service Manual FG10-PG05 P ARTS ILLUSTRA TION A B 1 2 3 7 17 5 6 15 14 16 24 8 9 10 11 12 13 7 20 132 21 22 23 4 25 26 27 38 29 28 30 31 25 32 33 34 35 36 37 28 39 40 41 42 43 44 45 4.
FG10-PG05 Service Manual ◄ 17 FG10-PG05 P ARTS ILLUSTRA TION NOTE Some of the following item numbers are not included in the light weight model of the PG05 Prole Grinder 44 52 56 57 58 59 60 61 6.
18 ► FG10-PG05 Service Manual FG10 P ARTS LIST ITEM P/N QTY DESCRIPTION 1 25294 2 HOSE ASSEBL Y 25251 1 HYREVZ MOTOR ASSY (INCL ITEMS 4-15, 17, 18, & 20-23) 2 01604 3 O-RING • 3 25790 1 CAUTIO.
FG10-PG05 Service Manual ◄ 19 FG10 P ARTS LIST ITEM P/N QTY DESCRIPTION 86 26056 2 WHEEL PIVOT 87 26022 1 PIVOT SHAFT WHEEL 88 26024 2 WHEEL, 3.3 INCH 89 12175 4 W ASHER 90 26203 4 BALL BEARING 91 2.
20 ► FG10-PG05 Service Manual PG05 P ARTS LIST ITEM P/N QTY DESCRIPTION 1 25294 2 HOSE ASSEBL Y 25251 1 HYREVZ MOTOR ASSY (INCL ITEMS 4-15, 17, 18, & 20-23) 2 01604 3 O-RING • 3 25790 1 CAUTIO.
FG10-PG05 Service Manual ◄ 21 PG05 P ARTS LIST 85 17668 2 ROLL PIN 86 26056 2 WHEEL PIVOT 87 26022 1 PIVOT SHAFT WHEEL 88 NO ITEM 89 12175 4 WASHER 90 26203 4 BALL BEARING 91 26046 2 ROLLER 92 26247.
22 ► FG10-PG05 Service Manual SP ARK GUARD & INNER GUARD ITEM # P/N QTY DESCRIPTION 1 00719 2 NYLOCK NUT 2 29920 2 CAPSCREW 3 02259 2 WASHER 4 69755 1 SP ARK GUARD 5 69767 1 SP ARK SCREEN 69772 1 SP ARK GUARD ASSY (INCLUDES ITEMS 1 THRU 5) Inner Guard NOTE: Items in this view can be found on the main parts list.
.
Stanley Hydraulic T ools 3810 SE Naef Road Milwaukie, Oregon 97267-5698 USA (503) 659-5660 / Fax (503) 652-1780 www .stanleyhydraulic.com.
An important point after buying a device Stanley Black & Decker PG05 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stanley Black & Decker PG05 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stanley Black & Decker PG05 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stanley Black & Decker PG05 you will learn all the available features of the product, as well as information on its operation. The information that you get Stanley Black & Decker PG05 will certainly help you make a decision on the purchase.
If you already are a holder of Stanley Black & Decker PG05, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stanley Black & Decker PG05.
However, one of the most important roles played by the user manual is to help in solving problems with Stanley Black & Decker PG05. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stanley Black & Decker PG05 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
